AvatarControls Freecube Modular System

USB Power Socket

Item No: AFC01US

Description: The Freecube USB Power Socket base is the foundation of the modular system, providing multiple power outlets and USB charging capabilities.

Packing List:

• USB Power Socket * 1
• Top Cover *1
• User Manual *1

Product Appearance:

A compact, white, rectangular unit. It features a hinged protection door on one side, revealing four standard electrical outlets (????). A power cable extends from one end. The top surface has a circular touch power button (?) and a small indicator light (?). A USB charging port is also visible.

Specifications:

Attention:

Do not coil the extension cords when using the USB Power Socket base, as this may reduce the actual load current. When multiple plugs are inserted simultaneously, the total load power must not exceed the maximum allowable power. This product is intended for indoor use only.

FCC Compliance:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warranty Card:

User Name: [blank]
Address: [blank]
Contact: [blank]
Order Date: [blank]
Guarantee Clause: Within 7 days of sale, if there is performance failure and the outer package is complete (no scratches), the item can be replaced with the same type of goods, excluding man-made damage. The goods are guaranteed for one year from the date of sale; accessories are not covered. Warranty service is effective only under normal use. Man-made damage, disassembly, improper use, etc., are not covered. The warranty card must be presented for warranty service. Altering the card or failing to provide it may result in refusal of warranty.

Bluetooth Speaker

Item No: AFCS01

Description: This Bluetooth Speaker accessory is designed to integrate with the Freecube system or function independently, offering wireless audio playback.

Packing List:

• Bluetooth Speaker * 1
• User Manual *1

Product Appearance:

A compact, cube-shaped device. It features a TF card slot (?️), a reset hole (?️), and a Micro USB port for charging (?). The top surface has control buttons: a Play/Pause button (▶️⏸️), a Next/Volume Up button (⏭️➕), and a Previous/Volume Down button (◀️➖).

Specifications:

How to Use:

1. Assembly: Can be placed on any layer of the Freecube. Charges automatically when connected to the Freecube's metal connection.
2. External Powered: Can be used independently with a Micro USB cable. An indicator light (?) shows charging status (red light when charging, off when fully charged).
3. Battery Powered: Works independently for 4-12 hours on its built-in battery.
4. Bluetooth Music Playback: Search for "Freecube" Bluetooth settings on your phone, pair, and play.
5. TF Card Music Playback: Insert TF card to play MP3/WAV files. Can switch between TF card and Bluetooth mode by double-clicking the play button.

Attention:

• Do not hit the speaker.
• Avoid contact with benzene, diluents, and other chemicals.
• Keep away from magnetic and electric fields.
• Avoid direct rays or heating appliances.
• Do not disassemble, repair, or rebuild.
• Dispose of packaging, batteries, and old electronics properly.

Operation Instruction:

Note: The device has Bluetooth mode and TF card mode. You can play audio files transmitted by Bluetooth in Bluetooth mode. You can also play MP3 and WAV files stored in TF card while in TF Card mode.

Troubleshooting:

FCC Compliance:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warranty Card:

User Name: [blank]
Address: [blank]
Contact: [blank]
Order Date: [blank]
Guarantee Clause: Within 7 days of sale, if there is performance failure and the outer package is complete (no scratches), the item can be replaced with the same type of goods, excluding man-made damage. The goods are guaranteed for one year from the date of sale; accessories are not covered. Warranty service is effective only under normal use. Man-made damage, disassembly, improper use, etc., are not covered. The warranty card must be presented for warranty service. Altering the card or failing to provide it may result in refusal of warranty.

LED Sensor Light

Item No: AFCL01

Description: This LED Sensor Light accessory is designed to attach to the Freecube USB Power Socket Base, offering adjustable lighting with gesture control.

Packing List:

• LED Sensor Light * 1
• User Manual *1

How to Use:

1. Assembly: Can be placed on any layer of the Freecube. A maximum of four LED Sensor Lights can be placed on one Freecube USB Power Socket Base. The LED Sensor Light can be used once the metal connection is placed on the Freecube.
2. Control Mode: Controlled by hand gestures (tapping or sliding) over the sensor on the upper side of the light fixture. Avoid keeping your hand over the light sensor constantly, as this can result in operation error.
3. Brightness Toggle: Gently tap or slide your hand over the light sensor to adjust the brightness levels. There are 3 levels of brightness adjustments: Off -> Low brightness -> Middle brightness -> High brightness -> Off.
4. Color Mode: To enter the color mode, touch the upper side of the light fixture or keep your hand close to the light sensor for 2 seconds. To exit the color mode, touch or tap the light sensor again to set the light as the current color displayed.
5. Music Rhythm Mode: When the Freecube is connected with the Bluetooth speaker accessory, the light can flash with the rhythm of the music. To enter the music rhythm mode, double tap the light sensor. To exit the music rhythm mode, double tap the light sensor again. When there are more than one LED Sensor Light connected to the Freecube, it can form a rhythmic light post.
6. Linkage Setting: When there are 2 or more LED Sensor Lights connected to the Freecube, the lights can be synchronized by sliding from bottom to top or from top to bottom. This makes it easy for all lights to display the same color and brightness. When in music rhythm mode, the sliding motion can make all the lights into a rhythmic mode and automatically arranged in a sliding order.

Specifications:

FCC Compliance:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warranty Card:

User Name: [blank]
Address: [blank]
Contact: [blank]
Order Date: [blank]
Guarantee Clause: Within 7 days of sale, if there is performance failure and the outer package is complete (no scratches), the item can be replaced with the same type of goods, excluding man-made damage. The goods are guaranteed for one year from the date of sale; accessories are not covered. Warranty service is effective only under normal use. Man-made damage, disassembly, improper use, etc., are not covered. The warranty card must be presented for warranty service. Altering the card or failing to provide it may result in refusal of warranty.

Wireless Charger

Item No: AFCC01

Description: This Wireless Charger accessory is designed to attach to the Freecube USB Power Socket Base, providing convenient wireless charging for compatible devices.

Packing List:

• Wireless Charger * 1
• User Manual *1

Product Appearance:

A circular charging pad featuring a non-slip silicone ring (?) on its surface. An indicator light (?) is located on the side of the pad. The wireless charging area (⚡) is clearly marked.

How to Use:

1. Prepare the Freecube base: Open and remove the top cover of the Freecube USB Power Socket.
2. Attach the Wireless Charger: Place the Wireless Charger accessory onto the Freecube base, ensuring its metal connection faces down onto the socket's connection point.

Specifications:

Precautions:

• Keep the charger away from water and other liquids.
• When cleaning the charger, first make sure it is disconnected from the power supply.
• To maximize the phone charging performance, please do not place metal pieces, coins, or other debris on the charging area.

FAQ:

Q: Why isn't my phone charging on the pad?

A: Please check if there are foreign matters on the charging area.

Q: What if the area is clean but the phone still not charging?

A: Please make sure the charger receiver is inserted in your phone in the correct orientation.

FCC Compliance:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warranty Card:

User Name: [blank]
Address: [blank]
Contact: [blank]
Order Date: [blank]
Guarantee Clause: Within 7 days of sale, if there is performance failure and the outer package is complete (no scratches), the item can be replaced with the same type of goods, excluding man-made damage. The goods are guaranteed for one year from the date of sale; accessories are not covered. Warranty service is effective only under normal use. Man-made damage, disassembly, improper use, etc., are not covered. The warranty card must be presented for warranty service. Altering the card or failing to provide it may result in refusal of warranty.