UISP Wave Nano
Getting Started
This guide provides essential steps for setting up your UISP Wave Nano.
-
Unboxing and Components
Verify all components are present. The package typically includes the UISP Wave Nano device and mounting hardware.
Specifications:
- Mounting Screws: M3.5, M3
- Torque: 7 Nm, 1 Nm
- Dimensions: 25mm, 63.5mm
- Hole Diameter: Ø6mm (Ø1/4")
- Clearance: ≤5cm
-
Mounting Preparation
Identify mounting locations. Ensure a clear line of sight for optimal wireless performance.
Mounting Considerations:
- Position A and Position B may indicate specific mounting points or orientations.
- Ensure a minimum distance of ≤5cm from obstructions.
-
Physical Installation
Secure the device using appropriate mounting hardware. Use M3.5 or M3 screws as needed.
Installation Notes:
- Apply torque values of 7 Nm or 1 Nm as specified for different fasteners.
- The device may require rotation (R) for optimal alignment.
-
Power Connection
Connect the power adapter to the device and a power source.
-
Network Connection
Connect the LAN port to your network infrastructure.
-
Initial Setup
Power on the device. Follow on-screen prompts or refer to the full user manual for detailed configuration.
-
Software/App Access
Download the UISP mobile application to manage your device.
Available on: ? App Store, ▶️ Google Play
-
Configuration
Configure network settings, security, and other parameters via the UISP application or web interface.
-
Verification
Confirm successful installation and connectivity. Check indicator lights for status.
Support and Resources
For further assistance and detailed information, visit the official support website.
Support URL: helpu.co
UI Support: Contact UI Support for technical assistance.
