User Manual for WISILICA models including: WCA2CSRNP, 2AG4N-WCA2CSRNP, 2AG4NWCA2CSRNP, Radiar AR10 Bluetooth 5.2 Controllable Dual Channel 0-10V Room Controller, Radiar AR10, Bluetooth 5.2 Controllable Dual Channel 0-10V Room Controller, Dual Channel 0-10V Room Controller, 0-10V Room Controller, Room Controller, Controller
WiSilica, Inc. WCA2CSRNP Radiar AR10 2AG4N-WCA2CSRNP 2AG4NWCA2CSRNP wca2csrnp
Radiar AR10 Radiar AR10 is a BLE5.2 controllable, dual-channel 0-10V room controller. The device is powered by 277VAC voltage, also has a 20A relay to use it as a room controller or as a plug-load controller. It comes with Class-1 and Class-2 dual channel 0-10V dimming outputs, 0-10V sensor input, and 12V auxiliary output. The high output ratings within the device makes it suitable to control multiple numbers of light fixtures within a room. The device comes with 150mm external wire antenna for communication. The Lumos Controls ecosystem comprises controllers, sensors, switches, modules, drivers, gateways, and analytical dashboards, and can be connected to the Lumos Controls cloud for data analytics and configuration management. The lighting network's configuration, commissioning, and controlling can be done super-quick from any mobile device. The ecosystem is listed by the Design Lights Consortium (DLC), qualifying it for energy conservation incentive programs and rebates utility companies in North America. Table of Contents Radiar AR10 1. Features............................................................................................................................................................... 3 2. Specifications .................................................................................................................................................... 3 3. Dimensions ........................................................................................................................................................ 5 4. Wire Description............................................................................................................................................... 5 5. Antenna Information ...................................................................................................................................... 7 6. Wiring Types ...................................................................................................................................................... 7 7. Wiring Diagram ................................................................................................................................................ 8 8. Items included in the package box ........................................................................................................... 9 9. Ordering Information ..................................................................................................................................... 9 2 Radiar AR10 1. Features Dual channel 0-10V independent output to control intensity and color temperature (CCT). Load control up to 20A @ 120/277VAC. Auxiliary 12V/100mA output to power the sensors. 0-10 VDC input channel to integrate with third party sensors. Class-1 and Class-2 dual channel 0-10V outputs to control the dimming and CCT. It acts as a Plug load controller to manage, control and monitor the plug loads efficiently. Instantaneous current and voltage measurement of connected load. BLE5.2 based non-flooding intelligent communication. Standard ½ inch chase nipple allows easy mounting to a junction box. Zero downtime Over-the-Air (OTA) firmware updates. 2. Specifications Electrical Input Voltage Input Current Frequency Load Voltage Load Current Max LOAD output wattage Inrush current Surge protection Standby current 0-10V Output Number of channels Voltage range Current Dimming Range Dimming curve Value 120 277 VAC 40 Ma @230 50 60 Hz 90-277 V 20A 5 KW 4A 4 kV 14 Ma @ 110v Remarks 75 Ma @ 110v 12 Ma @ 230 V Value 2 0-10VDC 100mA 0-100% linear (default) /logarithmic Remarks Tolerance: ±0.2V Source current per channel 1000 steps resolution Sensor Input Value 3 Remarks Voltage Range Auxiliary Output Voltage Current 0-10VDC Analog input Value 12VDC 100mA Radiar AR10 Remarks Bluetooth Frequency Max output power Receive sensitivity Connection distance (device to device) Value 2402-2480 MHz 8 dBm -95 dBm 45m (146 ft) Remarks vary depending on the installation environment Environmental Operating temperature (in °C, °F) Case temperature (in °C, °F) Relative humidity (in °C, °F) Value -20 50 ºC 70 ºC 20 85 % Mechanical Dimensions Dimensions Weight (in gm, oz) Case material Flammability rating Value 109.5 x 96.5 x 28 mm 4.3 x 3.8 x 1.10 inch 160 gm (2.11 oz) ABS Plastic (Blue color) UL 94 5VA Remarks Remarks L x W x H L x W x H 4 3. Dimensions Radiar AR10 4. Wire Description 5 Class-1 outputs Pin Name Color Guage Rating 1 Line Black 12AWG (4.0mm2) 600V 2 Common Neutral White 12AWG (4.0mm2) 600V 3 Load Red 14AWG (2.5 mm2) 600V 4 0-10V DIM1+ Purple 20AWG (0.5mm2) 600V 5 0-10V DIM2+ Orange 20AWG (0.5mm2) 600V 6 0-10VDIM-/GND Pink 20AWG (0.5mm2) 600V 7 12VDC Yellow 20AWG (0.5mm2) 600V 8 0-10VDC sensor input Blue 20AWG (0.5mm2) 600V Radiar AR10 Description 120-277VAC 120-277VAC 120-277VAC 0-10VDC/100mA 0-10VDC/100mA 0-10VDC/GND 12VDC/100mA 0-10VDC/2mA Class-2 Outputs Pin Name Push-in connector Color 1 0-10V DIM1+ Purple 2 0-10V DIM2+ Orange 3 0-10VDIM-/GND Pink 4 0-10VDC sensor input Blue 5 12VDC Yellow 6 0-10VDIM-/GND Pink Description 0-10VDC/100mA 0-10VDC/100mA 0-10VDC/GND 0-10VDC/2mA 12VDC/100mA 0-10VDC/GND 6 5. Antenna Information 150mm wire antenna Radiar AR10 Antenna Properties Frequency range 2.4 GHz-2.5GHz Impedance 50 Nominal VSWR 1.92:1 Max Return loss -10 dB Max Gain(peak) 2 dBi Cable loss 0.3 dBi Max Polarization Linear vertical 6. Wiring Types Class-1 wiring In Class-1 wiring, the 0-10V low voltage control wires run along with the line voltage wires in a same conduit. (See the image below) Class 1 installations require wire with insulation that is rated for the voltage carried (most wiring has 600V rated insulation) and must be installed in conduit or a protective cable assembly. 7 Radiar AR10 Class-2 wiring In Class-2 wiring, the 0-10V low voltage wires run separately in another conduit (See the image below) These circuits do not have high enough voltage or current to present a hazard to personnel and have less stringent installation requirements in regards to protection of the wiring. A Class 2 wiring may be installed free within the wall or ceiling without line voltage rated insulation or protection of conduit or a cable assembly. 7. Wiring Diagram 1. Configuring Radiar AR10 for dimming, tuning and an external sensor control. 8 2. Configuring Radiar AR10 for Plug Load Control Radiar AR10 8. Items included in the package box Radiar AR10 User Manual Antenna 9. Ordering Information Product Code WCA2CSRN WCA2CSRN P Product Description Wireless 0-10V dual channel dimming AC powered room controller without Power measurement. Wireless 0-10V dual channel dimming AC powered room controller Measurement. Communic ation Voltage Rating BLE5.2 120-277V AC BLE5.2 120-277V AC Sensor Input 0-10 VDC 0-10 VDC Output Channel Aux Power Relay Control 0-10V 2 Channels 12VDC 20A Inbuilt Power Measure ment No 0-10V 2 Channels 12VDC 20A Yes 9 Radiar AR10 10 Version 1.6 Radiar AR10 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. 11Microsoft: Print To PDF