Instruction Manual for BRODBECK IRONWORKS models including: 10 Inch Flat Platen, 10 Inch Platen, Flat Platen, Platen

Ryan Brodbeck

10" Standard Platen Assembly Instructionsclick to download

Assembly Instructions – Brodbeck Ironworks

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • References

File Info : application/pdf, 4 Pages, 286.15KB

FLAT PLATEN (10") ASSEMBLY INSTRUCTIONS

ITEM

DESCRIPTION

QTY

1

1.5" SQ TOOL ARM 14" LG

1

2

PLATEN D PLATE

1

3

1/2" HEX BOLT 3"LG

2

4

1/2" CARRIAGE BOLT 2.5"LG

2

5 ½" THIN NYLOCK NUT

3

6

½" TEFLON WASHER .020" THK

1

BLACK ADJUSTABLE

7 HANDLE ½"-13

1

INTERNAL THREAD

8 ½" FLAT SAE WASHER

2

9 10" FORMED PLATEN 1

REV. A

IMAGE 1

FLAT PLATEN (10") ASSEMBLY INSTRUCTIONS
10 1/4" HEX BOLT ½" LONG 2

11

5/16" SPACER 1/2" ID 1.0"OD

2

12 WEAR PLATE 10" X 2" 1

¼" INTERNAL THREAD 13 BLACK ADJUSTABLE 2
HANDLE

14

¼" CARRIAGE BOLT 1" LONG

2

15

2" IDLER WHEEL

2

IF YOU HAVE ANY ISSUES WITH ASSEMBLY OR MISSING PARTS PLEASE CONTACT US IMMEDIATELY Ben Secrist 513-532-7062, Ben@brodbeckironworks.com

2 REV. A

FLAT PLATEN (10") ASSEMBLY INSTRUCTIONS
TOOL LIST - ¾" COMBO WRENCH - ¾" SOCKET AND RATCHET - 7/16" COMBO WRENCH OR SOCKET
10" Platen Assembly
Place one teflon washer between arm and d-plate where the d-plate will rotate (red arrow). Install the platen d-plate with ½-13 x 2-1/2 carriage bolt, flat washer, and nylock nut on the short arm. Make sure the holes in the d-plate are on the bottom. (green arrow) Insert the ½"-13 x 2-1/2" carriage bolt into the slot and secure with ½-13 internal threaded adjustable handle. Install the idler wheels into the platen d-plateusing ½"-13x 3" hex bolt, spacer, and nylock nut. Be careful not to overtighten bearings. The wheel should spin freely but there shall not be extra space between the bearings and nut or bolt head. Install the platen onto the platen d-plate using ¼"-20threaded handles and ¼"-20x 1" carriage bolts.
3 REV. A

FLAT PLATEN (10") ASSEMBLY INSTRUCTIONS
Install the wear plate to the flat platen using short 1/4" hex bolts. Align with belt on machine and tighten in place. Overtightening may strip the threads in the wear plate.
4 REV. A



References

• mailto:Ben@brodbeckironworks.com