LED Commercial Lighting and Lighting Controls | Current - GLI Brands
Instruction Manual for GE current models including: LED 2G11 Base LED Bulb Ballast Compatible, LED 2G11, Base LED Bulb Ballast Compatible, LED Bulb Ballast Compatible, Ballast Compatible, Compatible
LED172G11/835/10 - LED High Lumen Biax Plug-In Lamps | Current
File Info : application/pdf, 2 Pages, 995.93KB
DocumentDocumentLED 2G11 Plug-In Ballast Compatibility Guide LED High Lumen Biax® Plug-In Ballast Compatibility Compatible Not Compatible Not Applicable Use with cautingPF<0.9 or THD>20% IMPORTANT NOTICE: : This list is based in part on information provided by the ballast supplier, and testing was done on a stable AC power supply under laboratory, which may not be representative of your particular end-use conditions. While each ballast type listed has undergone testing, some have undergone revisions that may change operating parameters and impact lamp performance. Applications and conditions of use are many and varied and beyond Current's control, so purchasers and users should make their own determinations as to the suitability of a lamp-ballast combination for their own particular application and use. Compatibility may also extend to ballasts beyond this list, so performing an on-site test before installation is recommended. High Lumen Biax® Plug-In Ballast Compatibility BRAND BALLAST TYPE GE GE GE GE GE Philips Philips Philips Osram Osram Osram Universal GEC140MAX-A GEC240MAX-A GEC340MAX-A GEC240MVPS-A GEC225MVPS-A ICN-1TTP40-SC ICN-2TTP40-SC ICN-3TTP40-SC QHE 1x40DL/UNV ISN-SC QHE 2x40DL/UNV ISN-SC QHE 3x40DL/UNV ISN-SC C240PUNVHP-B · Information is subject to change without notice · Compatibility may vary per revision. FULL LOAD 120V 277V 120V N-1 277V www.gecurrent.com © 2021 Current Lighting Solutions, LLC. All rights reserved. GE and the GE monogram are trademarks of the General Electric Company and are used under license. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions. LEDL133 (Rev 07/12/21)