Cybex Summer Cover for Pallas G i-Size

Fitting Instructions

1. Step 1: Insert the shoulder belt guide through the designated slot on the summer cover. The diagram shows a hand pulling the shoulder belt through a slit in the cover near the headrest.

   Diagram showing insertion of shoulder belt guide.

2. Step 2: Place the summer cover over the car seat. The diagram shows hands positioning the cover onto the car seat, aligning it with the seat structure.

   Diagram showing placement of the cover.

3. Step 3: Secure the cover by fastening the buckles. The diagram illustrates fastening the buckle at the front of the seat, likely for the harness.

   Diagram showing buckle fastening.

4. Step 4: Ensure the cover is correctly positioned around the seat. The diagram shows the back of the car seat with the cover fitted, highlighting the straps or edges.

   Diagram showing correct positioning on the back of the seat.

5. Step 5: Tuck the excess material of the cover under the seat base. The diagram shows the bottom part of the cover being tucked in, with a checkmark indicating correct installation.

   Diagram showing tucking excess material and final check.