VTech Marble Rush® Sky Elevator Set™ Instruction Manual
Introduction
Thank you for purchasing the Marble Rush® Sky Elevator Set™. Get ready for a rush of non-stop action! Build thrilling courses and send the marbles into motion. Please refer to the Color Manual for detailed building steps.
The set includes a Train and a Sky Elevator.
- Train: Features an 'OFF / Sound Selector' and a 'Music Selection Button'.
- Sky Elevator: Features an 'ON / OFF Selector'.
Included in the Package
- Marble Rush® Sky Elevator Set™
- 143 Build Components
- Manual
- 10 Marbles
- Color Manual
- Sticker Sheet
WARNING: All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties, cords, and packaging screws are not part of this toy and should be discarded for your child's safety. For your child's safety, discard all packaging materials like adhesive tapes, plastic sheets, fasteners, labels, cords, and packaging screws. They are not part of the toy.
NOTE: Please save this Instruction Manual as it contains important information. It is advisable to save this user manual as it contains important information.
WARNING: Do not aim at eyes or face. Do not discharge any object other than the projectile provided with this toy. Do not aim at eyes or face. Do not use projectiles other than those supplied with this toy.
Safety Warnings
- CHOKING HAZARD: Toy contains small parts and small balls. Not for children under 3 years.
- Adult assembly is required for battery installation. Keep batteries out of reach of children.
Instructions
Battery Removal and Installation -- Sky Elevator
- Make sure the unit is turned Off.
- Find the battery cover located on the back of the unit. Use a screwdriver to loosen the screw and then open the battery cover.
- Remove old batteries by pulling up on one end of each battery.
- Install 3 new AAA (LR03/AM-4) batteries following the diagram inside the battery box. For best performance, alkaline batteries or fully charged Ni-MH rechargeable batteries are recommended.
- Replace the battery cover and tighten the screw to secure.
Battery Removal and Installation -- Train
- Make sure the unit is turned Off.
- Find the battery cover located on the back of the unit. Use a screwdriver to loosen the screw and then open the battery cover.
- Remove old batteries by pulling up on one end of each battery.
- Install 3 new AAA (LR03/AM-4) batteries following the diagram inside the battery box. For best performance, alkaline batteries or fully charged Ni-MH rechargeable batteries are recommended.
- Replace the battery cover and tighten the screw to secure.
ATTENTION: Batteries or accumulators must be installed by an adult. Keep batteries or accumulators out of reach of children.
Important Notes & Precautions
- Keep your body, hair, and clothing away from the moving train. If something gets caught in the train's wheel, turn the train OFF by sliding the OFF / Sound Selector to the OFF position.
Important Battery Information
- Insert batteries with the correct polarity (+ and -).
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
- Only batteries of the same or equivalent type as recommended are to be used.
- Do not short-circuit the supply terminals.
- Remove batteries during long periods of non-use.
- Remove exhausted batteries from the toy.
- Dispose of batteries safely. Do not dispose of batteries in fire.
Rechargeable Batteries
- Remove rechargeable batteries (if removable) from the toy before charging.
- Rechargeable batteries are only to be charged under adult supervision.
- Do not charge non-rechargeable batteries.
Product Features
1. OFF / Sound Selector
Slide the selector all the way to the right ? to turn on both music and sound effects (SFX). The middle position ? plays SFX with no background music. Slide the selector all the way to the left ? to turn off the train.
2. Music Selection Button
Press the Music Selection button ? to cycle through an assortment of background music.
3. Automatic Shut-Off
To preserve battery life, the Marble Rush Sky Elevator Set will automatically power down after several minutes without input. The unit can be turned on again by sliding the OFF / Sound Selector to the middle or right most position. The unit will automatically turn off when the batteries are very low.
Care & Maintenance
- Keep the unit clean by wiping it with a slightly damp cloth. Do not use solvents or corrosive products.
- Avoid prolonged exposure of the toy to sunlight and any other heat sources.
- Remove the batteries if the unit will not be in use for an extended period of time.
- This toy is made with durable materials. Nevertheless, avoid shocks against hard surfaces and do not expose it to moisture or water.
- If the unit stops working or malfunctions, install a new set of batteries.
Troubleshooting
If the toy no longer functions or seems to malfunction, follow these steps:
- Turn off the toy.
- Remove the batteries.
- Wait a few minutes before reinserting the batteries.
- Turn on the toy. It should normally be ready to restart.
- If the toy still does not work, replace all batteries with new ones.
If the problem persists, please contact consumer service.
Support and Warranty
Need help with our products?
- For France, Belgium, and French-speaking Switzerland: Visit www.vtech-jouets.com, Assistance section.
- For Canada: Visit www.vtechkids.ca/fr, Support section.
Want to consult our warranty policy?
- For France, Belgium, and French-speaking Switzerland: Visit www.vtech-jouets.com, Warranty section.
- For Canada: Visit www.vtechkids.ca/fr, Policies section.
Visit our website for more information about our products, downloads, resources, and more: vtechkids.com, vtechkids.ca
Read our complete warranty policy online at vtechkids.com/warranty or vtechkids.ca/warranty.
FCC Compliance
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Supplier's Declaration of Conformity
47 CFR § 2.1077 Compliance Information
- Trade Name: VTech®
- Model: 5599
- Product Name: Marble Rush® Sky Elevator Set™
- Responsible Party: VTech Electronics North America, L.L.C.
- Address: 1156 W. Shure Drive, Suite 200, Arlington Heights, IL 60004
- Website: vtechkids.com
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Environmental Information
VTech® toys are electrical and electronic equipment (EEE) which, at the end of their life, should be collected selectively for recycling. To preserve the environment, VTech® recommends that you remove used batteries and dispose of them in designated containers, and then dispose of the toy at the end of its life in collection points provided in stores or in your community.
The crossed-out wheeled bin symbol on products and batteries indicates that they should not be disposed of with household waste, as they contain substances that can be harmful to the environment and health. When symbols Hg, Cd, or Pb are indicated, it means the battery contains more than the specified value of mercury (Hg), cadmium (Cd), or lead (Pb) in Directive 2006/66/CE on batteries and accumulators. The solid bar under the crossed-out wheeled bin symbol indicates that the product was placed on the market after August 13, 2005. Help protect the environment by sorting your used products and batteries.
For more information on the collection and sorting of used batteries, visit http://www.corepile.fr. For more information on the sorting of electrical and electronic products, contact our consumer service.
