BOYA WMic5 Ultracompact 2.4GHz Dual-Channel Wireless Microphone System
Statement
Thanks for choosing BOYA!
Please read this manual carefully before using and strictly operate and store it in accordance with the instructions. Please save the manual for your future reference. If you need further assistance than the user manual, please consult your retailer for help or email us: sales@boya-mic.com
General Introduction
The BOYA WMic5 is an incredibly lightweight, and easy-to-use wireless microphone system for up to 2 people, adopting 2.4GHz wireless transmission technology. The microphone delivers exceptional and broadcast-quality sound to DSLR, mirrorless and video cameras, smartphones, tablets, computers, etc. It is ideal for content creation, vlogging, mobile journalism, and more.
With capabilities of mute and noise cancellation, the small and light WMic5-TX transmitter has a built-in omnidirectional microphone and with 360-degrees of sound pickup. The magnetic belt clip of the transmitter can be used with the magnetic nameplate (sold separately), which can be easily clipped to shirts and clothing.
The series offers WMic5-RX, WMic5-RXD, and WMic5-RXU receivers to choose from, featuring selectable Mono/ Stereo output settings and supporting real-time audio monitoring. The WMic5-TX transmitter and WMic5-RX receiver of the series provide long operating life for your recordings (up to about 10 hours for TX; about 20 hours for RX). The WMic5-RXD receiver features an MFi Certified Lightning output, designed for iOS devices, while the WMic5-RXU receiver features a USB-C output, designed for devices with a USB-C port.
Cautions
- Disintegration of this device by non-professionals is strictly prohibited.
- Please keep it away from heat sources such as heaters or ovens.
- Do not remove the battery without professionals' help.
- Please clean the device with only a soft, dry cloth.
- When using and storing, please keep away from dust and moisture.
- For the best pick-up pattern, do not hold your hand against the microphone capsule cover.
Available Kits
| Model | In the box |
|---|---|
| WMic5-M1 | 1 × WMic5-TX, 1 × WMic5-RX |
| WMic5-M2 | 2 × WMic5-TX, 1 × WMic5-RX |
| WMic5-M3 | 1 × WMic5-TX, 1 × WMic5-RXD |
| WMic5-M4 | 2 × WMic5-TX, 1 × WMic5-RXD |
| WMic5-M5 | 1 × WMic5-TX, 1 × WMic5-RXU |
| WMic5-M6 | 2 × WMic5-TX, 1 × WMic5-RXU |
Product Structure
Wireless Transmitter WMic5-TX
The diagram shows the BOYA WMic5-TX transmitter. A status indicator light (1) is located on the front.
1. Status Indicator
| Mode | Indicator |
|---|---|
| Unpaired | Blinks blue slowly (per second) |
| Pairing | Blinks blue rapidly |
| Paired Successfully | Static blue light |
| Mute ON | Blinks red slowly (every half second) |
| Noise Cancellation ON | Static green light |
| Maximum / Minimum Gain | Blinks blue twice rapidly |
| Low Battery | Blinks red rapidly |
| Charging | Static red light |
| Fully Charged | Red light off, Static blue light |
2. Power Button & Controls
The diagram shows the side and back views of the WMic5-TX transmitter with numbered controls.
- Power Button (2): Press and hold for 3 seconds to Power ON/OFF.
- Mute ON/OFF: Press once.
- Pair: Press twice.
- +/- / NR Button (3):
- Press +/- button to adjust mic gain (totally 6 levels). The setting is retained even after the power is turned off.
- Press and hold or continuously press "+"/"-" to adjust mic gain to maximum/minimum level; the indicator blinks blue twice rapidly.
- Press the NR button (press both "+" and "-" buttons at the same time) to turn on/off noise cancellation. Default setting is off.
- USB-C Charging Port (4) (DC 5V): Use the included USB-C charging cable to charge the transmitter.
- Magnetic Belt Clip (5)
- Built-in Microphone (6)
Wireless Receiver WMic5-RX
The diagram shows the BOYA WMic5-RX receiver. A status indicator light (1) is located on the front.
1. Status Indicator
| Mode | Indicator |
|---|---|
| Unpaired | Blinks blue slowly (per second) |
| Pairing | Blinks blue rapidly |
| Paired Successfully | Static blue light |
| Mono Output Mode | Static blue light |
| Stereo Output Mode | Static green light |
| Maximum / Minimum Volume | Blinks blue twice rapidly |
| Low Battery | Blinks red rapidly |
| Charging | Static red light |
| Fully Charged | Red light off, Static blue light |
2. Power Button & Controls
The diagram shows the side and back views of the WMic5-RX receiver with numbered controls.
- Power Button (2): Press and hold for 3 seconds to Power ON/OFF.
- Pair: Press twice.
- +/- or M/S Button (3):
- Press +/- button to adjust output volume (totally 6 levels). The setting is retained even after the power is turned off.
- Press and hold or continuously press "+"/"-" to adjust output volume to maximum/minimum level; the indicator blinks blue twice rapidly.
- Press the M/S button (press both "+" and "-" buttons at the same time) to set the output mode to mono or stereo. In mono mode, audio from left and right channels is mixed. In stereo mode, audio from left and right channels is separated to left and right outputs. Default setting is mono.
- Belt Clip (4)
- USB-C Charging Port (5) (DC 5V): Use the included USB-C charging cable to charge the receiver.
- 3.5 mm Headphone Output (6): Connect headphones for audio monitoring.
- LINE OUT Jack (7): Connect the WMic5-RX to a smartphone, tablet, camera, recorder, or mixer with the included output cables.
WMic5-RXD: Compact Receiver with Lightning Connector
The diagram shows the WMic5-RXD receiver with numbered components.
1. MFi Certified Lightning Connector:
Can be connected to an iOS Lightning device.
2. Status Indicator
| Mode | Indicator |
|---|---|
| Unpaired | Blinks blue slowly |
| Pairing | Blinks blue rapidly |
| Paired Successfully | Static blue light |
3. Pair Button (3)
4. Mono/ Stereo Switch (4):
The output mode can be toggled between mono and stereo. In mono mode, audio from left and right channels is mixed. In stereo mode, audio from left and right channels is separated to left and right outputs.
5. 3.5 mm Headphone Jack (5):
Connect headphones for audio monitoring.
WMic5-RXU: Compact Receiver with USB-C Connector
The diagram shows the WMic5-RXU receiver with numbered components.
1. USB-C Connector:
Can be connected to an Android smartphone, tablet, or other USB-C devices.
2. Status Indicator
| Mode | Indicator |
|---|---|
| Unpaired | Blinks blue slowly |
| Pairing | Blinks blue rapidly |
| Paired Successfully | Static blue light |
3. Pair Button (3)
4. Mono/ Stereo Switch (4):
The output mode can be toggled between mono and stereo. In mono mode, audio from left and right channels is mixed. In stereo mode, audio from left and right channels is separated to left and right outputs.
5. 3.5 mm Headphone Jack (5):
Connect headphones for audio monitoring.
Operation
For the WMic5-M1 / WMic5-M2 kit
- Press and hold the power button for 3 seconds to turn on the WMic5-TX transmitter and the WMic5-RX receiver.
- Pairing: The system is pre-paired before leaving the factory. Therefore, the connection will be established automatically once they are powered on. If they are disconnected, please follow these steps:
- ① While powered on, double-press the power button on both the transmitter and receiver to enter pairing mode. The indicators on both will blink blue rapidly.
- ② The transmitter and receiver will be successfully paired within 5 seconds. The indicators on both will light up static blue.
- Connect the receiver to the mic input of a camera, recorder, or mixer using the supplied 3.5 mm TRS to TRS cable; or connect it to a smartphone, tablet, or computer using the supplied 3.5 mm TRS to TRRS cable.
- You are ready to record.
For the WMic5-M3 / WMic5-M4 / WMic5-M5 / WMic5-M6 kit
- Press and hold the power button for 3 seconds to turn on the transmitter.
- Plug the WMic5-RXD into an iOS device or the WMic5-RXU into a USB-C device.
- Pairing: The system is pre-paired before leaving the factory. Therefore, the connection will be established automatically once they are powered on. If they are disconnected, please follow these steps:
- ① While powered on, double-press the transmitter's power button to enter pairing mode. Its indicator blinks blue rapidly.
- ② Press and hold the receiver's pair button for 3 seconds to enter pairing mode. Its indicator blinks blue rapidly.
- ③ The transmitter and receiver will be successfully paired within 5 seconds. The indicators on both will light up static blue.
- You are ready to record.
⚠️ Note: Due to the 2.4GHz wireless frequency being widely used, the signal may be easily attenuated or interfered. Please try to avoid obstacles while using, such as walls and buildings. And keep away from devices with 2.4GHz frequency, such as high-power Wi-Fi antennas, radios, etc.
Specifications
WMic5-TX Transmitter
| Parameter | Value |
|---|---|
| Transmission Type | 2.4GHz ISM Frequency |
| Modulation | GFSK |
| Operating Range | Up to 196 ft (60 m) (without obstacle) |
| RF Output Power | <10mW |
| Polar Pattern | Omnidirectional |
| Frequency Response | 20Hz-20KHz |
| Maximum SPL | 120dB SPL |
| Sensitivity | -39±2dB |
| SNR | >78dB |
| Power Requirements | Built-in Li-ion Battery or USB-C DC 5V |
| Battery Voltage / Capacity | 3.7V/ 180mAh |
| Built-in Battery Life | Approx. 10 hours |
| Antenna | PIFA |
| Audio Input | Built-in Microphone |
| Weight | Approx. 14.5 g (0.5 oz) |
| Dimensions | 45.9x23.9x15 mm |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C to +60°C |
WMic5-RX Receiver
| Parameter | Value |
|---|---|
| Transmission Type | 2.4GHz ISM Frequency |
| Modulation | GFSK |
| Operating Range | Up to 196 ft (60 m) (without obstacle) |
| RF Output Power | <10mW |
| Power Requirements | Built-in Li-ion Battery or USB-C DC 5V |
| Battery Voltage / Capacity | 3.7V/ 400mAh |
| Built-in Battery Life | Approx. 20 hours |
| Antenna | PIFA |
| Audio Output | 3.5 mm Headphone Jack, 3.5 mm TRS Output Jack |
| Weight | Approx. 32 g (1.1 oz) |
| Dimensions | 62.1x31.6x16.5 mm |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C to +60°C |
WMic5-RXD Receiver
| Parameter | Value |
|---|---|
| Transmission Type | 2.4GHz ISM Frequency |
| Modulation | GFSK |
| Operating Range | Up to 196 ft (60 m) (without obstacle) |
| RF Output Power | <10mW |
| Audio Output | 3.5 mm Headphone Jack |
| Power Requirements | MFi Certified Lightning Connector, Supplied by iOS Devices |
| Antenna | PIFA |
| Weight | Approx. 14.5 g (0.5 oz) |
| Dimensions | 75.6x23.2x12 mm |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C to +60°C |
WMic5-RXU Receiver
| Parameter | Value |
|---|---|
| Transmission Type | 2.4GHz ISM Frequency |
| Modulation | GFSK |
| Operating Range | Up to 196 ft (60 m) (without obstacle) |
| RF Output Power | <10mW |
| Audio Output | 3.5 mm Headphone Jack |
| Power Requirements | USB-C Connector, Supplied by USB-C Devices |
| Antenna | PIFA |
| Weight | Approx. 14.5 g (0.5 oz) |
| Dimensions | 75.6x23.2x12 mm |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C to +60°C |
Packing List
WMic5-M1
- 1× WMic5-TX Transmitter
- 1× WMic5-RX Receiver
- 2x USB-C Charging Cable
- 1x Fur Windshield for Built-in Microphone
- 1x 3.5 mm TRS to TRS Output Cable for Cameras
- 1x 3.5 mm TRS to TRRS Output Cable for Smartphones
WMic5-M2
- 2x WMic5-TX Transmitter
- 1× WMic5-RX Receiver
- 1× USB-A to Triple Head USB-C Charging Cable
- 2x Fur Windshield for Built-in Microphone
- 1x 3.5 mm TRS to TRS Output Cable for Cameras
- 1x 3.5 mm TRS to TRRS Output Cable for Smartphones
WMic5-M3
- 1× WMic5-TX Transmitter
- 1× WMic5-RXD Receiver
- 1× USB-C Charging Cable
- 1x Fur Windshield for Built-in Microphone
WMic5-M4
- 2× WMic5-TX Transmitter
- 1× WMic5-RXD Receiver
- 2x USB-C Charging Cable
- 2x Fur Windshield for Built-in Microphone
WMic5-M5
- 1× WMic5-TX Transmitter
- 1× WMic5-RXU Receiver
- 1× USB-C Charging Cable
- 1x Fur Windshield for Built-in Microphone
WMic5-M6
- 2x WMic5-TX Transmitter
- 1× WMic5-RXU Receiver
- 2x USB-C Charging Cable
- 2x Fur Windshield for Built-in Microphone
