ta-hifi 2000 R MKII Multi Source Player User Manual

User Manual for ta-hifi models including: MP 2000 R, MP 2000 R G3, 2000 R MKII Multi Source Player, 2000 R, MKII Multi Source Player, Multi Source Player, Source Player

MP 2000 R

Thorben Wittland

MP 2000 R

File Info : application/pdf, 70 Pages, 2.42MB

UM MP2000R G3 EN

USER MANUAL
R-SERIES 2000
MP 2000 R G3

Software Version V 1.0

Order number 9103-0626 EN

License Notice

The Spotify Software is subject to third party licenses found here: www.spotify.com/connect/third-party-licenses.
Use of the Works with Apple AirPlay badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. Apple and AirPlay are trademarks of Apple Inc., registered in the U.S. and other countries and regions.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries, used with permission. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries, used with permission

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by T+A elektroakustik is under license. Other trademarks and trade names are those of their respective owners.
HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. HD RadioTM and the HD, HD Radio, and "Arc" logos are proprietarytrademarks of iBiquity Digital Corp
This product contains software in form of object code that is partially based on free software under different licenses, especially the GNU General Public License. You can find details on this in the License Information which you should have received with this product. If you have not received a copy of the GNU General Public License, please see http://www.gnu.org/licenses/. For a period of three years after last distribution of this product or its firmware, offer the right to any third party to obtain a complete machine-readable copy of the corresponding source code on physical storage medium (DVD-ROM or USB stick) for a charge of 20. To obtain such copy of the source code, please write to the following address including information about product model and firmware version: elektroakustik, Planckstr. 9-11, 32052 Herford, Germany. The GPL license and further information about Licenses can be found on the internet under this link: http://www.ta-hifi.com/license-information It is also possible to retrieve the used licenses directly from the device with the help of an Internet browser. For details, see the chapter entitled "Legal Information".

Welcome.
We are delighted that you have decided to purchase a product. With your new MP 2000 R you have acquired a top-quality piece of equipment which has been designed and developed with the wishes of the audiophile music lover as absolute top priority. This system represents our very best efforts at designing practical electronic equipment incorporating solid quality, userfriendly operation and a specification and performance which leaves nothing to be desired. All these factors contribute to a piece of equipment which will satisfy your highest demands and your most searching requirements for a period of many years. All the components we use meet the German and European safety norms and standards which are currently valid. All the materials we use are subject to painstaking quality monitoring. At all stages of production we avoid the use of substances which are environmentally unsound or potentially hazardous to health, such as chlorine-based cleaning agents and CFCs. We also aim to avoid the use of plastics in general, and PVC in particular, in the design of our products. Instead we rely upon metals and other non-hazardous materials; metal components are ideal for recycling, and also provide effective electrical screening. Our robust all-metal cases exclude any possibility of external sources of interference affecting the quality of reproduction. From the opposite point of view our products' electro-magnetic radiation (electro-smog) is reduced to an absolute minimum by the outstandingly effective screening provided by the metal case. We would like to take this opportunity to thank you for the faith you have shown in our company by purchasing this product, and wish you many hours of enjoyment and sheer listening pleasure with your MP 2000 R.
elektroakustik GmbH & Co KG
3

About these instructions
All the controls and functions of the MP 2000 R which are frequently used are described in the first section of these operating instructions. The second part 'Basic settings, Installation, Using the system for the first time' covers connections and settings which are very seldom required; they are generally required only when the machine is set up and used for the first time. Here you will also find a detailed description of the network settings required for connecting the MP 2000 R to your home network.
Symbols used in these instructions
Caution! Text passages marked with this symbol contain important information which must be observed if the machine is to operate safely and without problems.
This symbol marks text passages which provide supplementary notes and background information; they are intended to help the user understand how to get the best out of the machine. italic Technical terms printed in italics are explained in detail at the end of the instructions.
Notes on software updates
Many features of the MP 2000 R are software based. Updates and new features will be made available from time to time. The update process takes only a few minutes. See the chapter entitled "Software update" for how to update your device via the internet connection. We recommend you to check for updates before using your MP 2000 R for the first time. To keep your device up to date you should check for updates from time to time.
IMPORTANT! CAUTION!
This product contains a class 1 laser diode. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel. The following caution labels appear on your device: Rear Panel:
CLASS 1 LASER PRODUCT
The operation instructions, the connection guidance and the safety notes are for your own good please read them carefully and observe them at all times. The operating instructions are an integral part of this device. If you ever transfer the product to a new owner please be sure to pass them on to the purchaser to guard against incorrect operation and possible hazards.
All the components we use meet the German and European safety norms and standards which are currently valid. This product complies with the EU directives. The declaration of conformity can be downloaded from www.ta-hifi.com/DoC.
4

Contents
Front panel controls ................................................................................................................10
Remote control.........................................................................................................................14
Basic settings of the MP 2000 R .............................................................................................16
Calling up and operating the menu....................................................................................................................16 Source settings..................................................................................................................................................17 Display Brightness.............................................................................................................................................17 Display Mode .....................................................................................................................................................17 Language........................................................................................................................................................... 17 Device name......................................................................................................................................................18 Energy Saver.....................................................................................................................................................18 Network .............................................................................................................................................................18 Device Info.........................................................................................................................................................18
D/A Converter Settings ............................................................................................................19
Calling up and operating the D/A converter options ..........................................................................................19 Oversampling (OVS) .........................................................................................................................................19 Output phase .....................................................................................................................................................19
Operation with the SRC 1 in an integrated system ...............................................................20
Operating the sources in detail...............................................................................................20
Operation with the SRC1 remote control ...........................................................................................................20 Operation of the MP 2000 R with controls on the front panel of the device.......................................................20
Favourites lists ........................................................................................................................................21 General information ...........................................................................................................................................21 Calling up the Favourites list .............................................................................................................................21 Adding a favourite..............................................................................................................................................21 Erasing a favourite from the Favourites list .......................................................................................................21 Selecting a favourite from the list ......................................................................................................................22 Directly selecting a favourite..............................................................................................................................22 Sorting Favourites lists ......................................................................................................................................22
Operating the radio .................................................................................................................................23 FM Radio ...........................................................................................................................................................23 Selecting FM radio.............................................................................................................................................23 Display ............................................................................................................................................................... 23 Manual station search .......................................................................................................................................23 Searching for an HD Radio station ....................................................................................................................24 Automatic station search ...................................................................................................................................24 Selecting a station from the Station list .............................................................................................................25 RDS functions....................................................................................................................................................25 Switching Radio Text on and off ........................................................................................................................25 Mono / Stereo ....................................................................................................................................................25 DAB - Radio..........................................................................................................................................................26 Selecting DAB radio ..........................................................................................................................................26 Display ............................................................................................................................................................... 26 Automatic station search ...................................................................................................................................26 Selecting a station from the Station list .............................................................................................................27 RDS functions....................................................................................................................................................27 Internet-Radio ......................................................................................................................................................28 Selecting Internet Radio as source....................................................................................................................28 Selecting podcasts ............................................................................................................................................28 Playback ............................................................................................................................................................28 Front panel display ............................................................................................................................................28 Search function..................................................................................................................................................29
5

Operating music services ...................................................................................................................... 30 General information .......................................................................................................................................... 30 Selecting the music service .............................................................................................................................. 30 Playlists and favourites ..................................................................................................................................... 32 Front panel display ........................................................................................................................................... 32
Operating the UPnP / DLNA source (Streaming Client) ...................................................................... 33 General information on the streaming client ..................................................................................................... 33 Selecting the UPnP / DLNA source .................................................................................................................. 33 Playback ........................................................................................................................................................... 33 Playback of directories...................................................................................................................................... 34 Search function ................................................................................................................................................. 34 Front panel display ........................................................................................................................................... 34
Playing USB memory media (USB Media source)............................................................................... 35 General information .......................................................................................................................................... 35 Selecting USB Media as source ....................................................................................................................... 35 Playback ........................................................................................................................................................... 35 Playback of directories...................................................................................................................................... 36 Front panel display ........................................................................................................................................... 36
Operating the CD player ........................................................................................................................ 37 Selecting the CD player as source ................................................................................................................... 37 Inserting a CD ................................................................................................................................................... 37 Front panel display ........................................................................................................................................... 37 Playing a CD ..................................................................................................................................................... 38 Variations .......................................................................................................................................................... 38 Track Select ...................................................................................................................................................... 38 During playback ................................................................................................................................................ 38 Playback mode ................................................................................................................................................. 38
Operating the Bluetooth source............................................................................................................ 39 Selecting the Bluetooth Audio source ............................................................................................................... 39 Setting up audio transfer................................................................................................................................... 39 Playback functions ............................................................................................................................................ 39 Controlling the MP 2000 R................................................................................................................................ 40 NOTES.............................................................................................................................................................. 40
The MP 2000 R as D/A Converter .......................................................................................................... 41 General Information on ..................................................................................................................................... 41 D/A Converter Operation .................................................................................................................................. 41 Selecting a ........................................................................................................................................................ 41 D/A Converter Source....................................................................................................................................... 41
USB DAC operation in detail ................................................................................................................. 42 System-requirements........................................................................................................................................ 42 Installing drivers ................................................................................................................................................ 42 Settings ............................................................................................................................................................. 42 Notes on ........................................................................................................................................................... 42 software ............................................................................................................................................................ 42 Notes on ........................................................................................................................................................... 42 operation ........................................................................................................................................................... 42 Notes on setting up ........................................................................................................................................... 42
Installation, Using the system for the first time, Safety notes .............. 43
Back panel connections ..........................................................................................................44
Installation and wiring .............................................................................................................46
Loudspeaker and signal cables ....................................................................................................................... 47 Mains cables and mains filters......................................................................................................................... 47 Changing the batteries ..................................................................................................................................... 47 Care of the unit ................................................................................................................................................. 47 Storing the unit................................................................................................................................................. 47
6

Safety notes..............................................................................................................................48
Installation ......................................................................................................................................................... 48 Connection ........................................................................................................................................................ 48 Power supply ....................................................................................................................................................48 Mains leads / Mains plug...................................................................................................................................48 Enclosure openings ..........................................................................................................................................48 Supervision of device operation .......................................................................................................................48 Service, Damage ...............................................................................................................................................48 Over voltage ......................................................................................................................................................49 Approved usage................................................................................................................................................49 Approval and conformity with EC directives ....................................................................................................49 Disposing of this product .................................................................................................................................49
Network Configuration ............................................................................................................50
General Information...........................................................................................................................................50 Compatible hardware and UPnP servers ..........................................................................................................50 Network settings menu ......................................................................................................................................50 Opening the network settings menu ..................................................................................................................50 Operating the nenu, changing and storing IP addresses ..................................................................................50 Closing the menu...............................................................................................................................................51 Interrupting the menu without storing the settings .............................................................................................51 The Configuration for a Wired Ethernet LAN or Power-Line LAN connection...............................................52 Setting the Parameters for a Wired Network .....................................................................................................52 The Configuration for a WLAN connection .......................................................................................................54
Firmware update ......................................................................................................................55
MP 2000 R / Supplementary Information ................................................................................56
Technical description Digital filters / Oversampling .............................................................57
Network Terminology ..............................................................................................................59
Trouble shooting......................................................................................................................61
Legal Information.....................................................................................................................64
Appendix A ...............................................................................................................................65
Wiring diagram balanced (XLR) .........................................................................................................................65 Wiring diagram unbalanced (Cinch / RCA) .......................................................................................................65 Wiring diagram network, tuner, storage, PC.....................................................................................................66 Wiring diagram antenna connection .................................................................................................................67
Appendix B ...............................................................................................................................68
Specification ........................................................................................................................................................68
7

PCM and DSD MP 2000 R and DSD MP 2000 R and PCM

Introduction
Two competing formats are available in the form of PCM and DSD, both of which are used to store audio signals at very high resolution and quality. Each of these formats has its own specific advantages. A vast amount has been written about the relative merits of these two formats, and we have no intention of participating in the dispute, much of which is less than objective in nature. Instead we consider it our task to develop equipment which reproduces both formats as effectively as possible, and exploits the strengths of each system to the full.
Our years of experience with both systems have clearly shown us that PCM and DSD are not comparable; it is essential to treat each format separately, and take their specific requirements into account. This applies both at the digital and analogue level.
For this reason the MP 2000 R employs two separate digital sections and two D/A converter sections - each optimised for one format.
By its nature the DSD format involves a noise floor which rises above the range of human hearing as frequency rises. Although this noise floor is not directly audible, it does subject the treble units in the loudspeakers to a significant load. It is also possible for the high-frequency noise to cause distortion in many low-bandwidth amplifiers. The lower the DSD sampling rate, the more severe the inherent noise, and it cannot be disregarded, especially with the DSD64 format - as used on the SACD. As the DSD sampling rate rises, the high-frequency noise becomes increasingly insignificant, and with DSD256 it is virtually irrelevant. In the past it has been standard practice to apply digital and analogue filtering processes in an attempt to reduce DSD noise, but such solutions are never entirely without side-effects on sound quality. For the MP 2000 R we have developed two special techniques designed to eliminate the sonic disadvantages:
1.) The True-DSD technique, consisting of a direct digital signal path without filtering and noise-shaping, plus our True 1-bit DSD D/A converter 2.) Analogue reconstruction filter with automatic bandwidth selection.
The PCM process makes extremely high-resolution sampling values available: up to 32 bits. However, the sampling rate of PCM is significantly lower than that of DSD, and the spacing in terms of time between the sampling values is greater. This means that it is extremely important with PCM to employ maximum possible precision when converting the high resolution into analogue signals. Here at our answer was to develop quadruple D/A converters which provide a four-fold improvement in accuracy over conventional converters. A further very important aspect of PCM reproduction is to reconstruct the curve of the original analogue signal between the sampling points with great accuracy, since these points are much more widely spaced in comparison with DSD. To this end the MP 2000 R employs a polynomial interpolation process (BezierSpline interpolation) developed in-house at , which in mathematical terms delivers the smoothest curve for a given number of reference points (sampling points). The output signal generated by Bezier interpolation exhibits a very "natural" shape, devoid of the digital artefacts - such as pre- and postoscillation - which are usually produced by the standard oversampling process. More detailed information on this can be found in the chapter "Technical description, oversampling / up-sampling"

Front panel controls

All the important functions of the MP 2000 R can be controlled using the buttons and the rotary knob on the front panel. Direct-acting buttons are provided for fundamental functions such as source select. Functions which are needed less frequently are controlled using a menu which is called up by pressing the button.
All information relating to the machine's state, the current track and the associated transmitting station are displayed on the integral screen. The following section explains the functions of the buttons on the machine, and the information provided on the screen.

On / Off switch

A brief press on the button switches the unit on and off.
In Comfort Standby mode the button of the MP 2000 R glows dimly to indicate its state of readiness. In Eco Standby mode the button is not lit. (see chapter `Basic settings of the MP 2000 R')
Caution! The mains button is not an isolation switch. Certain parts of the machine remain connected to mains voltage even when the screen is switched off and dark. To disconnect the device completely from mains power supply, the mains plug must be withdrawn from the wall socket. If you know you will not be using the machine for a long period, we recommend that you disconnect it from the mains

Source selection
SRC

Pressing one of these buttons selects the desired listening source. Press one of these buttons repeatedly if neccessary until the desired listening source appears on the screen. The audio source is automatically activated without pressing the SELECT knob again.
A long press on one of the two source selection buttons opens a selection list, which can be operated using the SELECT button.

CD drawer
10

The drawer is opened and closed by pressing the button.
If you press the / button after placing the CD in the machine, the drawer closes and playback starts with the first track. The open drawer also closes if you enter the number of a track using the remote control handset.

Front USB socket (USB IN)
Socket for a USB memory stick or an external hard disc. The storage medium can be formatted with the FAT16, FAT32, NTFS, ext2, ext3 or ext4 file system. The USB storage medium can be powered via the USB socket provided that its current drain meets the USB norm (< 500 mA). Normalised 2.5" USB hard discs can be connected directly to this socket, i.e. they require no mains PSU.

Navigation / Control

SELECT knob

Rotating this control selects a track for playback; the selected track then appears on the screen. As soon as the desired track number lights up, the track can be started by pressing the incremental control.
As well as selecting tracks, the SELECT knob is used for functions such as navigating within lists, controlling menus, and creating playback programs. (see chapter 'Basic settings of the MP 2000 R')

Operating buttons

Brief press: displays the Favourites list stored on the MP 2000 R
(see chapter 'Operating the radio, Favourites list' and 'Operating the Streaming Client, accessing media content via the Favourites list') In the list a Favourite can be selected using the SELECT knob; a brief press on the same knob then plays it.
Closing the list
A long press on the SELECT knob closes the Favourites list without switching to a Favourite.

Brief press:

Opens the `System Configuration' menu

(see chapter 'Basic settings of the MP 2000 R')

Long press:

Opens the Source Configuration menu (Radio only).

Brief press: Long press:

Toggle switch between display of current music track and list navigation / switches the CD Text on and off.
Switches between different screen displays

Remote control receiver
When using the remote control system please point the SRC1 handset in the direction of the receiver.
The line of sight between the SRC1 and the remote control receiver in the SRC1 must not be interrupted by any obstacles. Installing the SRC1 behind the glass doors of a cabinet will also adversely affect the remote control system. It is essential to prevent potentially interfering light (from fluorescent lamps and energy-saving bulbs) falling directly on the receiver, as this may markedly reduce the effective range of the remote control system.

Display

The graphic screen of the MP 2000 R displays all information regarding the status of the machine, the music track currently being played and the radio station currently tuned. The display is context-sensitive and varies according to the capabilities and facilities of the service or medium to which you are currently listening.
The most important information is highlighted on the screen in a contextsensitive manner. Supplementary information is displayed above and below the main text, or by means of symbols. The symbols used are listed and explained in the table below.

z.B.
The displays and symbols which appear on the screen vary according to the currently active function. The basic areas of the screen: Display field (a) shows the currently active source. Display field (b) shows information relating to the piece of music being
played. The essential information is displayed enlarged in the main line. Display field (c) shows information relating to the device and playback. The bottom line (d) displays supplementary context-sensitive information
(e.g. sampling frequency, elapsed time)
The MP 2000 R provides different screen displays for the Streaming Client and the radio. Large-format display: Enlarged display of the most important information, clearly legible even from a distance Detail display: Small-text display showing a large number of additional information points, e.g. bit-rate etc. A long press on the button on the remote control handset or the front panel of the device is used to switch between the display modes.

Screen symbols and their meaning

0 / 0

ABC

123

abc

Making connection (Wait / Busy) The rotating symbol indicates that the MP 2000 R is currently processing a command, or is attempting to connect to a service. These processes may take some time to complete depending on the speed of your network and the load upon it. During such periods the MP 2000 R may be muted, and may not respond to the controls. Please wait until the symbol disappears, then try again.
Indicates a music track which can be played, or a playlist.
Indicates a folder which conceals further folders or lists.
Indicates that a source is being reproduced via a cable connection.
Indicates that a source is being reproduced via a radio connection.
Indicates that the MP 2000 R is reproducing a station or playing back a music track.
Pause indicator
Buffer display (fullness indicator, memory display) and data rate indicator (if available): The higher the data rate, the better the quality of reproduction.
Display of the elapsed playback time. This information is not available for all services.
Indicates that the button can be used to switch to a higher menu or select level.
Position indicator in select lists. The first number shows the current position in the list, the second number the total number of list entries (length of list).
Indicates that the selected menu item or list point can be activated by pressing the button.
Display of the symbol input modes
Indicates the field strength of the radio signal.
If the symbol appears while playing back from a digital input - the MP 2000 R has switched over to its internal precision oscillator (local oscillator). This eliminates jitter effects, but is only possible if the clock quality of the connected signal is adequate.

Remote control

General Information
In general terms the remote control buttons have the same function as the corresponding buttons on the MP 2000 R's front panel.
The buttons not required to operate the MP 2000 R are not shown in the illustration of the SRC1.
When the MP 2000 R is used within a system which includes a PA 2x00 R connected using R2Link, the method of source selection differs to the following description. For details please see chapter entitled "Selecting sources in an integrated system".
The operation of your MP 2000 R G3 with the FM1000 remote control is still possible.

Switches the MP 2000 R on and off

Source select buttons

Selects the SCL function (e.g. access to music servers, streaming services or similar) or the USB DAC function (playback from a connected computer), or selects the USB Media function (connected USB memory media) of the streaming client.

Press this button repeatedly until the desired source appears on the screen.

MP 2000 R's CD function

A brief press on this button selects the digital input you wish to use. Press the button repeatedly until the desired input is
displayed on the screen.

Selects FM, DAB, or Internet radio as source. Press this button repeatedly until the desired source appears on the
screen.

Selects Bluetooth as source.

Alpha-numeric input

Direct alpha-numeric input, e.g. track number, fast station

select, radio station.

The and buttons are also used for non-standard

abc

characters.

...

During text input you can switch between numeric and alpha-

numeric input, and between capitals and lower case by pressing the button.

wxyz

Opens the setup menu for the source device just selected.

(Not all sources have their own Setup menu.)

Opens the system configuration menu

Navigation

Returns to the previous point / change button

Confirms the input / change button

Selects the next point within a list / select button

Selects the previous point within a list / select button

Confirmation button during input procedures

Playback functions

Starts playback (Play function) During playback: halts (Pause) or resumes playback

Stops playback. Long press while disc is stopped opens and closes the disc drawer.
During menu navigation: a brief press takes you back (higher) by one menu level or aborts the current input process; the change is then abandoned.

Selects the previous track during playback.

Selects the next track during playback.

Rewind to search for a particular passage. FM Radio: Manual station search

Fast-forward to search for a particular passage. FM Radio: Manual station search

Repeat functions (not possible with all media) Brief press: Repeat Track, Repeat ALL, 'Normal' Long press: Mix-Mode (Shuffle) ON / OFF Brief button presses in MIX mode: Mix, Repeat Track, Repeat Mix

Adds a favourite to the Favourites list. CD - player: Activates playback programming Adds a track to the playback program during playback programming

Long press: Removes a favourite from the Favourites list. CD - player: A Long press erases the playback program.

Button for switching between Stereo and Mono reception (only FM Radio) The Stereo setting is constantly displayed in the screen window by a symbol. The Mono setting is constantly displayed in the screen window by a symbol.

Switches between numeric and alpha-numeric input, and between capitals and lower case when pressed (repeatedly)

Calls up the search function for SCL, USB-Media, Internetradio, Podcasts and Music services. Activates the sort function within a Favourites list.

Displays the Favourites list created on the MP 2000 R

Switches the display from the track list / station list navigation to the ,Now Playing` view. Switches the Radiotext / CD-text function ON/OFF. A long press toggles between different screen displays.

Opens the D/A mode selection menu.

Basic settings of the MP 2000 R
System Settings (System Configuration menu)
In the System Configuration menu general device settings are adjusted. This menu is described in detail in the following chapter.

Calling up and operating the menu

Briefly press the button on the front panel or button on the remote control handset to call up the menu.
When you open the menu, the following Select points appear on the screen:

Using the front-panel controls: The SELECT knob is used to select any item within the menu system.
To change a selected menu item, press the SELECT knob to confirm your choice, then adjust the value by rotating the knob.
After making the adjustment, press the SELECT knob again to adopt the new setting.
You can interrupt the process at any time by touching the button; in this case any changes you have made are discarded.
Holding the SELECT knob pressed in takes you one level further down in the menu system.
Touch the button again to quit the menu.
Using the remote control handset: Use the / buttons to select an item in the menu. If you wish to change a selected menu item, first press the button,
and then use the / buttons to alter it. After making the change, press the button again to accept the
new setting. You can press the button at any time to interrupt the process; the
change is then abandoned. Press the button again to leave the menu.

Source settings menu item
Display Brightness menu item (screen brightness) Display Mode menu item
Language menu item

At this menu item you can activate and disable external sources, and assign a plain text name to each source; this name then appears in the screen displays. When you call up this menu item using the button, a list of all the external sources of the MP 2000 R appears. Each source is followed by the assigned name, or if you have disabled the source concerned the note 'disabled'. If you want to activate / disable a source, or change the plain text name, navigate to the appropriate line. To activate a source, press the green button; pressing the red button disables the source. To change the plain-text name, move to the appropriate line and press the button. Now use the alpha-numeric keypad of the SRC1 to change the name as required, then confirm your choice with ; this saves the settings for that source.
The button is used to switch between numeric and alpha-numeric input, and between capitals and lower-case letters. Letters can be erased by pressing the button. If you should wish to restore the factory default source name, erase the whole name before saving the empty field with the button: this action resets the display to the standard source names.

The only available method of entering the name is to use the alphanumeric keypad on the remote control handset.

The DIG OUT option allows you to switch the digital coaxial output on or off for connecting an external recording device. If the digital output is also required for sources that provide signals >192kHz or DSD (such as Roon, HIGHRESAUDIO, UPnP and USB-Media), this option must be activated. In this case, DSD source material is converted to PCM and PCM material with a sample rate >192 kHz is converted to a suitable sample rate. If the digital output is deactivated, the internal signal processing is based on the native signals - in this case, no signal is available at the digital output in the above-mentioned cases.
At this point you can adjust the brightness of the integral screen to suit your personal preference for normal use.

This menu item offers the choice between three different display operation modes:

Always on

Temporary

Always off

Selecting 'Temporary' will switch the display is on for a short while each time

the MP 2000 R is being operated. Shortly after operation the display will be

switched off again automatically.

The brightness of the 'Display Brightness'

display can be (see above).

adjusted

separately

with

the

item

In this menu item you define the language to be used for the displays on the screen of the front panel of the MP 2000 R.
The language used for data transferred to the machine, e.g. from an iPod or other Internet radio station, is determined by the supplying device or the radio station; you cannot define the language on the MP 2000 R.

Device name menu item
Energy Saver menu item

This menu point can be used to assign an individual name to the MP 2000 R. In a home network the device then appears under this name. If an amplifier is connected via the R2Link connection, then the amplifier is able to accept this name automatically, and display it on the screen.

The amplifier only accepts this name if an individual name has not already been assigned at the amplifier itself.
The MP 2000 R features two stand-by modes: ECO Standby with reduced stand-by current drain, and Comfort Standby with additional functions, but slightly higher current drain. You can select your preferred stand-by mode in this menu point:

On (ECO standby):

Active functions in ECO standby mode:

Power-on at the device itself, or by remote control.

Automatic power-down after ninety minutes without signal (only possible

with certain sources).

Off (Comfort standby):
The following expanded functions are available: On / Off button illuminated in stand-by mode. Unit can be switched on using the app. The automatic power-down function is disabled in Comfort standby mode.

Network menu item

All network settings can be carried out at this menu point. For a detailed description on setting up a LAN or WiFi connection please also refer to the section entitled "Network configuration".

Device Info menu item
Sub-point Update
Sub-point Update package
Sub-point Control
Sub-point Client
Sub-point DAB / FM
Sub-point Disc player
Sub-point Bluetooth
Sub-point Bluetooth pairings
Sub-point Default settings
Sub-point Legal information

At this menu point you will find information on the status of the installed software and the factory reset. At this point it is possible to initiate a firmware update. The update can be accessed from an Internet connection. This point displays the currently installed software package.
Display of the control software version
Display of the Streaming Client software version
Display of the tuner software version.
Display of the CD mechanism decoder software
Display of the Bluetooth module software
Calling up and confirming this menu point erases all stored Bluetooth pairings.
Calling up and confirming this menu point erases all personal settings, and restores the machine to the state as delivered (factory defaults). Information on accessing the legal information and license notices.
For further information, see the chapter entitled "Legal Information".

D/A Converter Settings
A number of special settings are available for the MP 2000 R D/A converter; they are designed to fine-tune the characteristics of your amplifier to suit your listening preferences.
The following settings can only be called up if PCM-encoded audio is being played.

Calling up and operating the D/A converter options

Briefly press the button on the remote control handset in order to call up the D/A converter set-up options. This action opens a set-up window in which the various options are displayed.
Now use the / buttons to select a set-up option.
In each case the displayed option can be altered using the / buttons.
Press the button again to leave the menu.

DSP set-up option Oversampling (OVS)

The MP 2000 R can exploit four different filter types offering different tonal characters:
Oversampling FIR long is a classic FIR filter with an extremely linear frequency response.
Oversampling FIR short is a FIR filter with improved peak handling.
Oversampling Bezier / FIR is a Bezier interpolator combined with a IIR filter. This process produces a result very similar to an analogue system.
Oversampling Bezier is a pure Bezier interpolator offering perfect "timing" and dynamics.
Please refer to the Chapter 'Technical description - Digital filters / Oversampling' for an explanation of the different filter types.

DSP set-up option Output phase

With particular instruments or voices the human ear is certainly capable of detecting whether absolute phase is correct or not. However, absolute phase is not always correctly recorded.
In this menu item the phase of the signal can be changed from normal to inverse phase and back.
The correction is carried out at the digital level, and has absolutely no adverse effect on sound quality.

Operation with the SRC 1 in an integrated system

MP 2000 R in a system with the PA 2x00

If the MP 2000 R is part of a system which includes a PA 2x00 R and is controlled via the SRC 1, the PA 2x00 R sources are not selected directly using the SRC 1's (handset supplied in the set) source select buttons but by repeatedly pressing the button on the SRC 1 remote control handset supplied with the PA 2x00 R, or using the source select menu, instead of.
This is the procedure for selecting the sources of the MP 2000 R using the Source Select menu:
A long press on the SRC 1's button calls up the Source Select menu: a list appears on the screen of the MP 2000 R showing the currently active source.
Your chosen source can be selected using the / buttons, then confirmed by pressing the button.
The source list closes, and the system plays the source you have selected.
The SRC 1's source select buttons are furthermore used to select the PA 2x00's sources when it is part of a system.

Operating the sources in detail

Operation with the SRC1 remote control
Operation of the MP 2000 R with controls on the front panel of the device

The operation of the source devices is described in the following chapters using the SRC1 remote control because only with this remote control all functions of this device can be operated (e.g. adding favourites).
The front panel controls can be used to operate the basic functions of the MP 2000 R. The Navigation/Control rotary control (SELECT knob) can be used to navigate through lists and menus or to control the CD player in the same way as the cursor and OK buttons of the SRC1 remote.
In Lists While playback: Rotating the SELECT knob returns to the list. Choose a list or menu item by turning the SELECT knob. By pressing the SELECT knob you can select an item or start playback of a
title or station. A long press on the the SELECT knob leaves a submenu or navigates to
the parent menu level (BACK).
Playback control Turning the SELECT knob lets you select a track. When the desired track lights up on the display this track can be started by
pressing the SELECT knob.

General information

Favourites lists
The MP 2000 R includes the facility to create Favourites lists. The purpose of these lists is to store radio stations and podcasts, so that they can be accessed swiftly. Each of the sources FM radio, DAB radio, Internetradio as well as Podcasts features its own Favourites list. Once stored, the favourites can either be selected from the Favourites list, or called up directly by entering the program location number. The option of selecting using the location number is particularly useful when you wish to call up favourites when the screen is not in view (e.g. from an adjacent room) or using a house control system.
Favourites lists for the various music services (TIDAL etc.) are not supported. Instead it is usually possible to add Favourites and Playlists on-line via the provider's account. These can then be called up and played via the MP 2000 R.

Calling up the Favourites list

The first step is to switch to one of the sources listed above. Press the button to call up the Favourites list.

a) Here the program location number is displayed within the list. Since it is possible to erase individual list items, the numbering may not be continuous.
b) The selected list entry is displayed in enlarged form. c) Position display in the Favourites list.

Adding a favourite

If you especially enjoy the piece of music or radio station to which you are currently listening, simply press the green button on the SRC1; this action stores the station in the corresponding Favourites list.
Each Favourites lists features 99 program locations. Favourites lists can only be used to store the piece of music or station which is currently playing.

Erasing a favourite from the Favourites list

Open the Favourites list by pressing the button. Use the / buttons to select the station in the list which you wish to erase, then hold the red button pressed in; this action removes the item from the
Favourites list.

Erasing a Favourite does not cause the following Favourites to move up the list. The station position is no longer displayed after erasure, but a new Favourite can still be assigned to it.

Selecting a favourite from the list

Press the button to call up the Favourites list.
Use the / buttons to select a stored item from the Favourites list. The selected favourite is displayed in enlarged form.
Select the favourite to be played by pressing the or button.
You can return to the station to which you are currently listening (quit) by pressing the button.

Directly selecting a favourite
Sorting Favourites lists

In addition to the option of selecting favourites using the Favourites list, it is possible to access the desired favourite directly by entering the program location number. To select a stored favourite directly during playback, enter the two-digit program location number of the new favourite using the numeric buttons (to ) on the remote control handset. After you have pressed the numeric buttons, playback switches to the favourite you have just selected.
The sequence of items in the Favourites list you have created can be altered in any way you wish. This is the procedure for changing the order of the list:
The first step is to call up the Favourites list by briefly pressing the button.
Use the / buttons to select the favourite whose position you wish to change. The selected Favourite is displayed in enlarged form.
Pressing the button activates the Sort function for the selected favourite. The favourite is highlighted on the screen.

Now move the activated favourite to your preferred position in the Favourites list.
A further press on the button de-activates the Sort function, and the favourite is stored at the new position.
Briefly press the button again to close the Favourites list.
If you have previously erased a number of favourites, you may well find that some program locations in the Favourites list are missing (empty). Nevertheless, the favourites can still be moved to any location in the list!

Operating the radio

The MP 2000 R features an FM Tuner (VHF radio) with HD RadioTM technology*, a DAB / DAB+ reception section (digital radio) and also includes the facility to stream Internet radio. The following section describes in detail how to operate the individual radio sources. HD Radio technology enables radio stations to transmit analogue and digital programmes on the same frequency simultaneously. The integral DAB+ receiving section is backwards-compatible with DAB, to ensure that you have access to a wide range of stations.
* HD RadioTM technology only available in US-version.
FM Radio

Selecting FM radio

Briefly tap the button on the front panel of the MP 2000 R or the button on the SRC1 remote control handset, repeatedly if necessary, until the source "FM Radio" is displayed on the screen.

Display

Manual station search

a) Displays the type of reception currently in use. b) Hear the music type or style is displayed, e.g. Pop Music.
This information is only displayed if the transmitting station broadcasts it as part of the RDS system. If you are listening to a station which does not support the RDS system, or only supports it in part, these information fields remain empty. c) The frequency and / or the station name is displayed in enlarged form. If a station name is displayed, its frequency is shown in area 'e'. d) These lines display information which is broadcast by the station (e.g. Radiotext). e) Display of Stereo '' / Mono ' f) The field strength and therefore the reception quality to be expected from the set transmitting station can be assessed from the field strength.
Holding one of the / buttons pressed in initiates a station search for FM tuner in the upward or downward direction. The station search stops automatically at the next station. A frequency can be selected directly by pressing the / buttons repeatedly. Briefly pressing the / buttons on the SRC1, repeatedly if necessary, enables you to select a particular frequency. As soon as the station is audible, you can add it to your Favourites list by pressing the button.

Searching for an HD Radio station
Automatic station search

The method of searching for an HD Radio station is the same as for an analogue FM station search. As soon as you select a station with a HD Radio programme, playback automatically switches to the digital programme.
As soon as the MP 2000 R is playing an HD Radio broadcast, the display of reception mode in area "a" (see illustration: FM Radio display) switches to "HD Radio", while screen area "g" shows the number of available stations, e.g. "1/4" (First HD Radio programme selected from 4 available).
You can switch between the available HD Radio programmes using the / buttons.

Operation on the front panel It is also possible to select a frequency directly, by rotating the knob on the machines front panel. By pressing the SELECT knob, repeatedly if necessary, the following operation modes can be temporary selected:

Display indicator Fav HD Freq No display (standard setting)

Function Selects a favourite from the list HD Radio programme selection (if available) Manual frequency selection Selects a station from the complete station list

A long press on the button on the front panel or on the on the SRC1 calls up the Station list menu. The following Select points are available:

If you wish to create a new station list, select the item "Create new list" and confirm your choice with .
The station search begins, and automatically searches for all radio stations which the machine is able to pick up.
If you wish to update an existing list, select the item "Add new stations". The menu item "Sorting by ..." allows you to sort the stored list by any of
several criteria.

Selecting a station from the Station list

Pressing the / buttons on the SRC1 or rotating the SELECT knob on the front panel opens the list of all stored stations.

RDS functions

a) Use the / buttons to select one of the stored stations. The station you choose is now displayed in enlarged form. Press the or button to select the enlarged station for playing. Pressing the button returns you to the station to which you are currently listening (quit).
b) Position indicator in the Favourites list.
Stations to which you often listen can be stored in a Favourites list; this makes it easier to select them (see the section entitled "Favourites list").
If the station being received is broadcasting relevant RDS data, the following information will be displayed on the screen: Station name Radiotext Program Service Data (PSD)*
For stations that do not support the RDS system or only partially or with weak reception, no information will be displayed. * Only possible when receiving HD Radio transmissions.

Switching Radio Text on and off

The Radio text function can be switched on and off by briefly pressing the button on the remote control handset.
HD Radio stations are also capable of transmitting what is known as PSD information (e.g. track and performer) in addition to Radiotext. As soon as an HD Radio station is picked up, you can cycle through the following operational states by repeatedly pressing the button: Radiotext on PSD information Radiotext off If the radio station is not transmitting Radiotext or PSD information, the display remains blank.

Mono / Stereo (only FM Radio)

You can toggle the radio of the MP 2000 R between stereo and mono reception by briefly pressing the button on the SRC1 or by a long press on the button on the front panel of the MP 2000 R. The reception mode is shown on the screen by the following symbols:
' ' (Mono) or '' (Stereo)
If the station you wish to listen to is very weak or very distant, and can only be picked up with severe background noise, you should always switch to MONO mode as this reduces the unwanted hiss significantly.
The Mono and Stereo symbols are only shown in the detailed screen display.
25

DAB - Radio
Selecting DAB radio
Display

Briefly tap the button on the front panel of the MP 2000 R or the button on the SRC1 remote control handset, repeatedly if necessary, until the source "DAB Radio" is displayed on the screen.
Depending on the frequency band (block), it may take up to two seconds to switch stations when in DAB mode.

Automatic station search

a) Displays the type of reception currently in use. b) Hear the music type or style is displayed, e.g. Pop Music.
This information is only displayed if the transmitting station broadcasts it as part of the RDS system. If you are listening to a station which does not support the RDS system, or only supports it in part, these information fields remain empty. c) The frequency and / or the station name is displayed in enlarged form. If a station name is displayed, its frequency is shown in area 'e'. d) These lines display information which is broadcast by the station (e.g. Radiotext). e) Display of Stereo ''. f) The field strength and therefore the reception quality to be expected from the set transmitting station can be assessed from the field strength. g) Bit-rate of the broadcasting station when listening to DAB radio. * The higher the bit-rate, the better the station's sound quality.
A long press on the button on the front panel or on the on the SRC1 calls up the Station list menu. The following Select points are available:

Selecting a station from the Station list

Pressing the / buttons on the SRC1 or rotating the SELECT knob on the front panel opens the list of all stored stations.

RDS functions

If the station being received is broadcasting relevant RDS data, the following information will be displayed on the screen:
Station name Radiotext Program type (genre)

For stations that do not support the RDS system or only partially or with weak reception, no information will be displayed.

Internet-Radio

Selecting Internet Radio as source

Briefly tap the button on the front panel of the MP 2000 R or the button on the SRC1 remote control handset, repeatedly if necessary, until the source "Internet Radio" is displayed on the screen.

Selecting podcasts

Select the "Podcasts" entry instead of the "Radios" entry from the list.

Playback

The method of operating music services is described separately in the section
entitled "Operating music services". The music content to be played is selected with the help of Select lists. These lists are controlled using the navigation buttons (cursor buttons) on the remote control handset or by the SELECT knob on the machine's front panel.

Front panel display

a) Use the / buttons to select the desired entry from the list. A brief press selects the previous / next entry within the list. The scrolling speed can be increased by holding the button pressed. The list entry you choose is now displayed in enlarged form. Press the or button to open or start the list entry shown in enlarged form. Pressing the button returns you to the previous folder level.
b) Indicates the currently selected point within the opened list.
Starting playback Press the button on the remote control handset or the machine's front panel to start playback.
Stopping playback Pressing the button halts playback.
Stations and podcasts to which you often listen can be stored in a Favourites list; this makes it easier to select them (see the section entitled "Favourites list").

While playing back the MP 2000 R can be switched to either of two different screen displays with a long press on the button: Large-format display:
Enlarged display of the most important information, clearly legible even from a distance
Detail display: Small-text display showing a large number of additional information points, e.g. bit-rate etc.

Search function

The Search function provides a means of locating Internet radio stations swiftly. This is the procedure for searching for a particular Internet radio station:
Locate the Select list for the entry "Radio", then use the / buttons to select the "Search" item, and confirm your choice by pressing the button or while navigating within lists alternatively call up the search function by pressing the blue button.
You will now see a window in which you can enter the keyword using the remote control handset's alpha-numeric keypad.
Press the button to erase any letter.
Briefly press the button to start the search.
After a short delay you will see a list of the search results.
Search strings can consist of up to ten characters. It is also possible to enter multiple keywords separated by a space character, e.g. "BBC RADIO".

General information

Operating music services
The MP 2000 R supports playback of music services such as TIDAL. To make use of music services you may need to take out a paid subscription with the appropriate provider.
Use of music services requires the input of access data (username and password. These access data can be stored separately for each provider in the "Music services" menu within the System Configuration menu (see the section entitled "Basic settings of the MP 2000 R").
Future music services and others which are not currently supported may be added subsequently by updates to the firmware of the MP 2000 R.

Selecting the music service

Press the button on the SRC1 or the front panel of the MP 2000 R, repeatedly if necessary, to select the desired music service.

If the list of the selected service does not open when you press the button, this may mean that the access data is not stored or is incorrect (see the
section entitled "Basic settings of the MP 2000 R / Music services").
TsehleecdteedvicmeusreicqustirreesamInintegrnseetrvaiccec,esseseinthoerdNeertwtoorekstcaobnlisfihguaractoionnnecchtiaopntetro. the

Registration takes place via the T+A MUSIC NAVIGATOR APP. The following music streaming services are available: airable radio und podcasts, Tidal, Qobuz, Deezer, Amazon Music HD, highresaudio, Tidal connect, Spotify connect, Apple AirPlay2, Plays with Audirvana, Roon The use of music services requires the entry of access data (user name and password). These access data can only be created via the T+A Music Navigator App G3 with the OAuth (Open Authorisation) protocol. To do this, select the music service you wish to subscribe to in the app and follow the login instructions. If you want to unsubscribe from a music service, you can use the "Unsubscribe" menu item in the app or the menu of the selected music service on the device
The MP 2000 R supports playback via Spotify.
Use your phone, tablet or computer as a remote control for Spotify.
Visit spotify.com/connect to find out more.
Connect the MP 2000 R and the smartphone/tablet to the same network.
Start the Spotify app and log in to Spotify.
Start playback via the Spotify app.
The MP 2000 R appears in the app in the list of available devices.
To start playback on the MP 2000 R, select it by tapping on the
MP 2000 R. Playback now starts via the MP 2000 R.

Apple AirPlay 30

The MP 2000 R supports playback via Apple AirPlay.
To do this, connect the MP 2000 R and the smartphone/tablet to the same network.
Start the desired AirPlay-compatible app (e.g. iTunes or similar).
Start playback.
The MP 2000 R appears in the app in the list of available devices.
To start playback on the MP 2000 R, select it from the list by tapping on it.
The source on the MP 2000 R is automatically switched to AirPlay and playback starts on the MP 2000 R. You can find further information at: https://www.apple.com/airplay/

Tidal Connect Roon Operation Playback

The MP 2000 R supports playback via TIDAL Connect.
Use your smartphone, tablet or computer as a remote control for TIDAL.
Visit https://tidal.com/connect to find out more.
To start playback via your mobile device, connect the smartphone/tablet of the MP 2000 R to the same network.
Start the Tidal app and log in.
Start playback via the Tidal app.
The MP 2000 R appears in the list of available devices.
To start playback on the MP 2000 R, select it by tapping on it.
The source on the MP 2000 R automatically switches to TIDAL Connect and playback starts on the MP 2000 R.
Apple AirPlay and Tidal Connect can only be activated via the respective app and are therefore not available as sources in the MP 2000 R source selection list.

General information The MP 2000 R supports playback via Roon. Roon is a paid software solution that manages and organises your music stored on a server. The streaming services TIDAL and Qobuz can also be integrated.
Playback Operation is exclusively via the Roon app. The MP 2000 R is recognised as a playback device (client) and can be selected for playback in the app. As soon as Roon is used for playback, ROON appears on the display of the MP 2000 R as the source. Further information on Roon and its operation can be found at: https://roonlabs.com

The music content to be played is selected via selection lists. These lists are operated using the navigation buttons (cursor buttons) on the remote control or with the SELECT button on the front of the device.

Starting playback
Stopping playback Skipping tracks

a) Use the / buttons to select a service / folder / title from the list. A short tap selects the previous / next entry in the list. The scrolling speed can be increased by holding down the buttons. The selected list entry is displayed enlarged. The or button opens / starts the enlarged list entry. Press the button to return to the previous folder level.
b) Displays the currently selected position within the open list. Press the button on the remote control handset or the machine's front panel to start playback.
Pressing the button halts playback.
A brief press on the / buttons during playback causes the device to jump to the next or previous piece of music within the current playlist.
The exact form of the displayed list and the preparation of the content depend to a large extent on the music service provider. You may therefore find that in some cases not all the functions described in these instructions can be used.
31

Playlists and favourites

Most music services offer the facility to register on the provider's website with the user data, create dedicated playlists, and manage the lists conveniently. Once created, the playlists appear in the Select list of the corresponding music
service, where they can be called up and played via the MP 2000 R.
The location within the select list at which the playlists can be accessed varies
from one music service to another. Often these folders are named "My music", "Library", "Favourites" or similar.

Front panel display

While playing back the MP 2000 R can be switched to either of two different screen displays with a long press on the button:
Large-format display: Enlarged display of the most important information, clearly legible even from a distance
Detail display: Small-text display showing a large number of additional information points, e.g. bit-rate etc.

Operating the UPnP / DLNA source
(Streaming Client)

General information on the streaming client

The MP 2000 R features what is know as a `streaming client'. This facility makes it possible to play music files stored on PCs or servers (NAS) within the network.
The media content formats which the MP 2000 R can reproduce are very wideranging, and extend from compressed formats such as MP3, AAC and OGG Vorbis to high-quality non-compressed data formats such as FLAC, ALAC, AIFF and WAV, which are thoroughly audiophile in nature. A full listing of all possible data and playlist formats is included in the Specification, which you will find in the Appendix to these instructions. Since virtually no read or data errors occur when electronic memory media are accessed, the potential reproduction quality is even higher than that of CD. The quality level may even exceed that of SACD and DVD-Audio.

Two apps are available for controlling the MP 2000 R via Apple iOS and Android operating systems. Please download the appropriate version from the Appstore and install it on your tablet PC or smartphone. You will find the app under the name "T+A MUSIC NAVIGATOR" in the Appstore. Alternatively, you can also scan the QR code printed below.

Android Version

Apple iOS Version

Selecting the UPnP / DLNA source
Playback

Briefly tap the button on the front panel of the MP 2000 R or the button on the SRC1 remote control handset, repeatedly if necessary, until the source "UPnP / DLNA" is displayed on the screen.
The music content to be played is selected with the help of Select lists. These lists are controlled using the navigation buttons (cursor buttons) on the remote control handset or by the SELECT knob on the machine's front panel.

a) Use the / buttons to select the desired entry (Server / Folder / Track) from the list. A brief press selects the previous / next entry within the list. The scrolling speed can be increased by holding the button pressed. The list entry you choose is now displayed in enlarged form. Press the or button to open or start the list entry shown in enlarged form. Pressing the button returns you to the previous folder level.
b) Indicates the currently selected point within the opened list.
The exact form of the displayed list and the preparation of the content also depend to a large extent on the capabilities of the server, i.e. the full facilities of
33

Starting playback Stopping playback Skipping tracks
Playback of directories

the MP 2000 R cannot be exploited with all servers or media. You may therefore find that in many cases not all the functions described in these instructions can be used.
Press the button on the remote control handset or the machine's front panel to start playback.
Pressing the button halts playback.
A brief press on the / buttons during playback causes the device to jump to the next or previous piece of music within the current playlist.
In addition to the facility to play back individual folder content, it is also possible to play back entire directories. This is accomplished by selecting the folder of the directory to be played, then pressing the button to start playback. Playback commences with the first entry in the list of content to be played. If an entry in the list should contain a folder with additional sub-folders, the content of the lowest folder is always played first. This is followed by the content of the next higher folder level, etc. (see diagram right).

Search function Front panel display

When you are navigating through lists you can call up the MP 2000 R`s letter search function at any time by briefly pressing the blue button. The screen now displays the message "Search". While this is on the screen, enter up to eight letters or numerals using the remote control handset; the letters assigned to the numeric buttons are printed below the buttons. To obtain a particular letter, press the appropriate button repeatedly until the correct letter appears on the screen. Before entering the next character you have to wait until the cursor is displayed again. Press the button to erase any letter. After pressing the button or after a brief delay with no further input the MP 2000 R moves to the first entry in the list which starts with the characters you entered.
If the text searched for is not found the best matching result will be shown. You can abort the search using the -button.
The function searches only the current folder. Eventually existing subfolders are ignored.
The search function is only available with server-side support and can be used via the `T+A MUSIC NAVIGATOR' app.
The MP 2000 R provides different screen displays for the Streaming Client. A long press on the button on the remote control handset is used to switch between the display modes. Large-format display: Enlarged display of the most important information, clearly legible even from a distance Detail display: Small-text display showing a large number of additional information points, e.g. bit rate etc.

General information

Playing USB memory media
(USB Media source)
The MP 2000 R is capable of playing music files stored on USB memory media, and features two USB sockets for this purpose: USB IN on the machine's front panel, and SCL USB on the back panel.
The memory medium can be formatted with any of the following file systems: FAT16, FAT32, NTFS, ext2, ext3 or ext4. It is also possible to power the USB memory medium via the USB socket, provided that the unit's current drain accords with the USB norm. Normed 2.5 inch USB hard discs can be connected to the socket directly, without requiring their own mains PSU.

Selecting USB Media as source

Briefly tap the button on the front panel of the MP 2000 R or the button on the SRC1 remote control handset, repeatedly if necessary, until the source USB MEDIA is displayed on the screen. All USB memory media connected to the machine are now displayed. If no USB memory medium is found, the screen displays the message "No USB media available".

Playback

The music content to be played is selected with the help of Select lists. These lists are controlled using the navigation buttons (cursor buttons) on the remote control handset or by the SELECT knob on the machine's front panel.

Starting playback
Stopping playback Skipping tracks

a) Use the / buttons to select an (a) USB memory / folder / track from the list. A brief press selects the previous / next entry within the list. The scrolling speed can be increased by holding the button pressed. The list entry you choose is now displayed in enlarged form. Press the or button to open or start the list entry shown in enlarged form. Pressing the button returns you to the previous folder level.
b) Indicates the currently selected point within the opened list.
Press the button on the remote control handset or the machine's front panel to start playback.
Pressing the button halts playback.
A brief press on the / buttons during playback causes the device to jump to the next or previous piece of music within the current playlist.

Playback of directories

In addition to the facility to play back individual folder content, it is also possible to play back entire directories. This is accomplished by selecting the folder of the directory to be played, then pressing the button to start playback. Playback commences with the first entry in the list of content to be played. If an entry in the list should contain a folder with additional sub-folders, the content of the lowest folder is always played first. This is followed by the content of the next higher folder level, etc. (see diagram right).

Front panel display

While playing USB memory media the MP 2000 R can be switched to either of two different screen displays with a long press on the button:
Large-format display: Enlarged display of the most important information, clearly legible even from a distance
Detail display: Small-text display showing a large number of additional information points, e.g. bit-rate etc.

Selecting the CD player as source
Inserting a CD

Operating the CD player
First select the CD Player as source, either using the button on the SRC1 or by repeatedly pressing the button on the front panel of the MP 2000 R.
Open the CD drawer ( on the front panel / SRC1) Place the disc centrally in the appropriate depression in the drawer, with the
side to be played facing down.

Front panel display

Close the CD drawer (on the front panel / SRC1)
When you close the drawer, the machine immediately reads the CD's 'Table of Contents'; the screen displays the message 'Reading'. During this period all button-presses are ignored.
The screen then displays the total number of tracks on the CD in the drawer, e.g.: '13 Tracks 60:27'.
It is also shows the current mode of operation, e.g.

In CD mode the MP 2000 R can be switched to either of two different screen displays with a long press on the button:
Large-format display: Enlarged display of the most important information, clearly legible even from a distance
Detail display: Small-text display showing a large number of additional information points, e.g. bit-rate etc.

Fig.

Large format display

Fig.

Detail display

Playing a CD Variations
Track Select During playback Playback mode Repeat
Mix mode
Fast Search 38

Press the rotary knob on the front panel or the button SRC1 remote control handset to begin the playback process. Playback starts, and the screen shows the mode of operation ( ) and the number of the track currently being played: 'Track 1'. The CD stops after the final track, and the screen again displays the total number of CD tracks and the overall running time.
If you press the / button after placing the CD in the machine, the drawer closes and playback starts with the first track. The open drawer also closes if you enter the number of a track using the remote control handset. You can interrupt playback at any time by pressing the button. During the interruption the screen displays the symbol. Press the button again to resume playback. Briefly pressing the button during playback causes the player to skip to the start of the next track. Briefly pressing the button during playback causes the machine to skip back to the start of the preceding track. A brief press on the button concludes playback. A long press on the button opens the CD drawer.
Briefly press the or button on the SRC1 repeatedly until the number of the track you want to hear appears on the integral screen. Releasing the button interrupts playback briefly, and after this the desired track is played.
You can also enter the number of the desired track directly using the numeric
buttons on the remote control handset.

The CD player in the MP 2000 R features various playback modes. During playback the current playback mode is shown on the screen.

Brief press:

Repeatedly pressing the button causes the machine to cycle through different playback modes.

'Repeat All' /

The tracks of the CD or a playback program are

'Repeat Program' continuously repeated in the preset sequence.

'Repeat Track'

The track of the CD or a playback program which has just been played is continuously repeated.

'Normal' / 'Program'

Normal playback of the whole disc, or normal program playback.

Long press:
Holding the button pressed in switches the machine to Mix mode. A second long press ends Mix mode.

'Mix' / 'Mix Program'

The tracks of the CD or of a playback program are played in a random sequence.

In Mix mode the Repeat function can be called up with a brief press of the button.

'Repeat Mix' /

The tracks of the CD or of a playback program are

'Rpt Mix Program' continuously repeated in a random sequence.

Fast forward search (hold the button pressed in)
Fast reverse search (hold the button pressed in)
Holding the button pressed in for a long period increases the rate (speed) of search. During the search process the screen displays the current track running time.

Operating the Bluetooth source

The MP 2000 R's integral Bluetooth interface provides a means of transferring music wirelessly from devices such as smart-phones, tablet PCs, etc. to the MP 2000 R.
For a successful audio Bluetooth transfer from a mobile device to the MP 2000 R the mobile device must support the A2DP Bluetooth audio transfer protocol.

Selecting the Bluetooth Audio source

Briefly tap the button on the front panel of the MP 2000 R, repeatedly if necessary, or the button on the SRC1 remote control handset until the source BLUETOOTH is displayed on the screen.

Setting up audio transfer

Before music from a Bluetooth-capable device can be played through the MP 2000 R, the external device must first be registered to the MP 2000 R. As long as the MP 2000 R is switched on and no device is connected, it is always ready to receive. In this state the screen displays the message 'not connected'.
This is the procedure for establishing a connection:
Start a search for Bluetooth equipment on your mobile device.
When it finds the MP 2000 R, make the connection to your mobile device.
Once the connection is successfully established, the message on the MP 2000 R's screen switches to 'connected to YOUR DEVICE'.
If your device requests a PIN code, this is always '0000'.
The procedure for establishing a connection can only be made if the Bluetooth source is activated (see chapter "Basic settings of the MP 2000 R").
Due to the large number of different equipment on the market, we are only able to provide a general description for setting up the radio connection. For detailed information please refer to the operating instructions supplied with your device.

Playback functions
Start and pause playback Stop playback

Information on the piece of music currently being played is displayed on the screen of the MP 2000 R if this function is supported by the device connected to the unit. The behaviour and method of operating the connected mobile device are determined by the device itself. In general terms the function of the buttons of the MP 2000 R or the SRC1 remote control handset are as follows:
The / buttons on the remote control handset or the front panel are used to start and pause playback (PLAY / PAUSE function).
Pressing the button halts playback.

Skipping tracks

A brief press on the / buttons during playback causes the device to jump to the next or previous piece of music within the current playlist.
Please note that many AVRCP-capable mobile devices do not support the controlling through the MP 2000 R. In case of doubt, please ask the manufacturer of your mobile device.

Controlling the MP 2000 R

The MP 2000 R can also be controlled from the mobile device (Start/Stop,
Pause, Volume, etc.). To control the MP 2000 R the mobile device must conform to the Bluetooth AVRCP protocol.

Please note that many AVRCP-capable mobile devices do not support all the MP 2000 R's control functions. In case of doubt, please ask the manufacturer of your mobile device.

NOTES

The MP 2000 R has been tested with a large number of Bluetooth-capable mobile devices. However, we are unable to guarantee general compatibility with all devices available commercially since the range of equipment is so wide, and the various implementations of the Bluetooth standard differ widely in some cases. If you encounter a problem with Bluetooth transfer, please contact the manufacturer of the mobile device.
The maximum range of a Bluetooth audio transfer is normally about 3 to 5 metres, but the effective range may be affected by a number of factors. To achieve good range and interference-free reception there should be no obstacles or persons between the MP 2000 R and the mobile device.
Bluetooth audio transfers take place in what is known as the "everyman frequency band", in which many different radio transmitters operate - including WiFi, garage door openers, baby intercoms, weather stations, etc. Radio interference caused by these other services may cause brief dropouts or - in rare cases - even failure of the connection, and such problems cannot be excluded. If problems of this kind occur frequently in your environment, we recommend that you use the Streaming Client or the USB input of the MP 2000 R instead of Bluetooth.
By their nature, Bluetooth transmissions always involve data reduction, and the attainable sound quality varies according to the mobile device in use, and the format of the music to be played. As a basic rule the maximum quality of music which is already stored in a data-reduced format, such as MP3, AAC, WMA or OGG-Vorbis, is worse than with uncompressed formats such as WAV or FLAC. For the highest reproduction quality we always recommend the use of the Streaming Client or the USB input of the MP 2000 R instead of Bluetooth.

Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries, used with permission. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries, used with permission

The MP 2000 R as D/A Converter

General Information on D/A Converter Operation

The MP 2000 R can be used as a high-quality D/A converter for other devices such as computers, streamer, digital radios etc. which are fitted with poor-quality converters or no converter at all. The MP 2000 R features two optical and two electrical S/P-DIF digital inputs on the back panel to allow this usage. A USB-DAC input on the back panel permits to use the MP 2000 R as D/A converter for computers.
You can connect devices with electrical co-axial or optical light-pipe output to the digital inputs of the MP 2000 R. At the optical inputs Digital In 3 and Digital In 4 the MP 2000 R accepts digital stereo signals conforming to the S/PDIF norm, with sampling rates of 32 to 96 kHz. At the electrical co-axial inputs Digital In 1 and Digital In 2 the range of sampling rates is from 32 to 192 kHz.
At the USB DAC IN input the MP 2000 R accepts digital PCM-encoded stereo signals with sampling rates of 44.1 to 384 kHz (32-bit) and DSD data with sampling rates of DSD64, DSD128 and DSD256.
If you wish the MP 2000 R to convert audio files from a Windows PC connected to it, you must first install driver software on the computer (see the chapter entitled `USB DAC operation in detail'). If you are using a computer running Mac OS X 10.6 or higher no drivers are necessary.

D/A Converter Operation

Selecting a D/A Converter Source
Screen Display

Select the MP 2000 R as listening source on your amplifier.
Choose the digital input to which you have already connected the source device which is to be played by pressing the source button on the front panel or the button or the button (for the USB DAC IN) on the SRC1 (repeatedly if necessary).
As soon as the source device delivers digital music data, the MP 2000 R automatically adjusts itself to the format and sampling rate of the signal, and you will hear the music.
During D/A converter operations the MP 2000 R integral screen displays the
characteristics of the digital input signal.

System-requirements Installing drivers
Settings Notes on software Notes on operation
Notes on setting up

USB DAC operation in detail
Intel Core i3 or higher or a comparable AMD Processor. 4 GB RAM USB 2.0 Interface Microsoft Windows 11, 10, 8.1, 8, 7 MAC OS X 10.6.+
If the device is to be operated in conjunction with one of the stated Windows operating systems, a dedicated driver must first be installed. With the driver installed, it is possible to play DSD streams up to DSD512 and PCM streams up to 384 kHz.
The MP 2000 R can be operated on the listed MAC and Linux operating systems without installed drivers. With MAC operating systems the playback of DSD streams up to DSD128 and PCM streams up to 384 kHz is possible. With Linux operating systems the playback of DSD streams up to DSD512 and PCM streams up to 384 kHz is possible
The required driver, together with detailed installation instructions including information on audio playback via USB, are available for downloading from our website at http://www.ta-hifi.com/support
A number of system settings have to be altered if you wish to operate MP 2000 R with your computer. These changes must be made regardless of the operating system. The installation instructions provide detailed information on how and where the settings are to be changed.
By default, the operating systems listed above do not support `native' music playback. This means that the PC always converts the data stream to a fixed sample rate, regardless of the sample rate of the file to be played. Separate software is available - e.g. J. River Media Center or Foobar - which prevents the operating system converting the sample rate. The installation instructions included in the driver package contain further information on audio playback via USB.
To prevent fail functions and system crashes of your computer and the playback program, please note the following:
For Windows OS: Install the driver before you use the MP 2000 R for the first time.
Use only drivers, streaming methods (e.g. WASAPI, Directsound) and playback software which are compatible to your operating system and between each other.
Never connect or disconnect the USB connection while the system is running.
Do not set up the MP 2000 R on or immediately adjacent to the computer to which it is connected, otherwise the device could be affected by interference radiated by the computer.

Installation, Using the system for the first time,
Safety notes
This section describes all those matters which are of fundamental importance when setting up and first using the equipment. This information is not relevant in daily use, but you should nevertheless read and note it before using the equipment for the first time.
43

Back panel connections

ANALOG OUT

BALANCED

The symmetrical XLR output delivers analogue stereo signals with a fixed level. It can be connected to the CD-input (line input) of any stereo pre-amplifier, integrated amplifier or receiver.
If both types of connection are present on the connected amplifier, we recommend the symmetrical option to obtain the best possible sound quality.

UNBALANCED

The unbalanced RCA output of the MP 2000 R delivers analogue stereo signals with a fixed level. It can be connected to the CD-input (line input) of any stereo pre-amplifier, integrated amplifier or receiver.

RADIO ANT
(aerial input for FM and DAB Radio)

The MP 2000 R features a 75 aerial input FM ANT, which is suitable both for a normal domestic aerial and a cable connection. For first-class reception quality a high-performance, professionally installed aerial system is indispensable.

DIGITAL OUT

Digital co-axial output for connection to an external recorder with an co-axial cable.
It is not always possible to produce a digital version for all media, as in some cases the original contains copy protection measures which prevent this.
The digital coaxial output can be switched on and off as required, see chapter Basic settings of the MP 2000 R.

DIGITAL IN

Inputs for digital source devices with optical or coaxial (RCA) outputs.
At its optical digital inputs the MP 2000 R accepts digital stereo signals (S/PDIF signals) with sampling rates from 32kHz up to 96 kHz. At the coaxial digital inputs sampling rates in the range 32 to 192 kHz are supported.

USB DAC IN
(USB device mode)

Socket for connecting a PC or MAC computer.
At this input the MP 2000 R accepts digital PCM stereo signals with sampling rates in the range 44.1 to 384 kSps, and digital DSD stereo signals from DSD64 to DSD256*.
* DSD256 and DSD512 only with a Windows PC.
If you wish the MP 2000 R to convert audio files from a Windows PC connected to it, you must first install the appropriate drivers on the computer. No drivers are required if you are using a Linux or MAC computer (see the chapter `USB DAC operation in detail').

LAN WiFi

Socket for connection to a wired LAN (Ethernet) home network.
If a LAN cable is connected this will have priority over wireless WiFi networks. The WiFi module of the MP 2000 R will automatically be disabled.
Input socket for WiFi antenna
* The aerial can also be set up free-standing using the magnetic base supplied
in the set; this ensures maximum possible range.

USB
(host mode)
R2LINK Mains in

Automatic Activation of the WiFi Module After powering on the MP 2000 R detects if it is connected to a wired LAN Network. If no wired LAN connection is found, the MP 2000 R will automatically activate its WiFi module and it will try to get access to your WiFi network.
Socket for a USB memory stick or external hard discs Files from a medium connected to this socket are reproduced via the source USB MEDIA. The storage medium can be formatted with the FAT16, FAT32, NTFS, ext2, ext3 or ext4 file system. The USB storage medium can be powered directly via the USB port provided that its current drain is in accordance with the USB norm. Normalised 2.5" USB hard discs can be connected directly, i.e. without a separate mains PSU.
Control input / output for R2LINK systems: Both sockets are equivalent one is used as input, the other one serves as output towards other R2LINK devices.
The mains cable is plugged into this socket.
For correct connections refer to the sections 'Installation and wiring' and 'Safety notes'.

Installation and wiring
Carefully unpack the unit and store the original packing material carefully. The carton and packing are specially designed for this unit and will be needed again if you wish to move the equipment at any time. If you have to transport the device, it must always be carried or sent in its original packaging in order to prevent damage and defects.
If the unit gets very cold (e. g. when being transported), condensation may form inside it. Please do not switch it on until it has had plenty of time to warm up to room temperature, so that any condensation evaporates completely.
If the device has been in storage, or has not been used for a protracted period (> two years), it is essential to have it checked by a specialist technician before re-use.
Before placing the unit on sensitive laquer or wood surfaces please check the compatibility of the surface and the unit's feet on a non visible point and if necessary use an underlay. We recommend a surface of stone, glass, metal or the like.
The unit should be placed on a rigid, level base (See also chapter "Safety notes"). When placing the unit on resonance absorbers or anti-resonant components make sure that the stability of the unit is not reduced.
The unit should be set up in a well ventilated dry site, out of direct sunlight and away from radiators.
The unit must not be located close to heat-producing objects or devices, or anything which is heat-sensitive or highly flammable. Mains and loudspeaker cables, and also remote control leads must be kept as far away as possible from signal leads and antenna cables. Never run them over or under the unit.
Notes on connections: A complete connection diagram is shown in 'Appendix A'.
Be sure to push all plugs firmly into their sockets. Loose connections can cause hum and other unwanted noises.
When you connect the output sockets of the MP 2000 R to the input sockets of the amplifier, always connect like to like, i. e. 'R' to 'R' and 'L' to 'L'. If you fail to heed this then the stereo channels will be reversed.
The device is intended to be connected to mains outlet with protective earth connector. Please connect it only with the mains cable supplied to a properly installed mains outlet with protective earth connector.
To achieve maximum possible interference rejection the mains plug should be connected to the mains socket in such a way that phase is connected to the mains socket contact marked with a dot (). The phase of the mains socket can be determined using a special meter. If you are not sure about this, please ask your specialist dealer.
We recommend the use of the 'POWER THREE' ready-to-use mains lead in conjunction with the 'POWER BAR' mains distribution panel, which is fitted with a phase indicator as standard. When you have completed the wiring of the system please set the volume control to a very low level before switching the system on.
The screen on the MP 2000 R should now light up, and the unit should respond to the controls.
If you encounter problems when setting up and using the amplifier for the first time please remember that the cause is often simple, and equally simple to eliminate. Please refer to the section of these instructions entitled 'Trouble shooting'.

Loudspeaker and signal cables
Mains cables and mains filters
Changing the batteries

Loudspeaker cables and signal cables (inter-connects) have a significant influence on the overall reproduction quality of your sound system, and their importance should not be under-estimated. For this reason recommends the use of high-quality cables and connectors.
Our accessory range includes a series of excellent cables and connectors whose properties are carefully matched to our speakers and electronic units, and which harmonise outstandingly well with them.
For difficult and cramped situations the range also includes special-length cables and special-purpose connectors (e. g. right-angled versions) which can be used to solve almost any problem concerning connections and system location.
The mains power supply provides the energy which your sound system equipment needs, but it also tends to carry interference from remote devices such as radio and computer systems.
Our accessory range includes the specially shielded 'POWER THREE' mains cable and the 'POWER BAR' mains filter distribution board which prevent electro-magnetic interference from entering your Hi-Fi system. The reproduction quality of our systems can often be further improved by using these items.
If you have any questions regarding cabling please refer to your specialist dealer who will gladly give you comprehensive expert advice without obligation. We would also be happy to send you our comprehensive information pack on this subject.
To open the battery compartment, slide the entire back of the remote down as shown below and then lift it off. Insert three batteries of the LR 03 (MICRO) type in the battery compartment, as shown in the engraved diagram. Please note: it is essential to replace all three batteries at the same time.

Care of the unit Storing the unit

Caution! Batteries shout not be exposed to excessive heat like sunshine, fire or the like.

Disposing of exhausted batteries:
Exhausted batteries must never be thrown into the household waste! They should be returned to the battery vendor (specialist dealer) or your local toxic waste collection point, so that they can be recycled or disposed in a proper way. Most local authorities provide collection centres for such waste, and some provide pick-up vehicles for old batteries.

Disconnect the mains plug at the wall socket before cleaning the case. The surfaces of the case should be wiped clean with a soft, dry cloth only. Never use solvent-based or abrasive cleaners! Before switching the unit on again, check that there are no short-circuits at the connections, and that all cables are plugged in correctly.

If the device is not used and has to be stored, place it in its original packaging and store it in a dry, frost-free location. Storage temperature range 0...40 °C

Installation
Connection Power supply Mains leads / Mains plug Enclosure openings Supervision of device operation Service, Damage
48

Safety notes
For your own safety please consider it essential to read these operating instructions right through, and observe in particular the notes regarding setting up, operation and safety.
Please consider the weight of the device. Never place the device on an unstable surface; the machine could fall off, causing serious or even fatal injury. Many injuries, especially to children, can be avoided if the following simple safety precautions are observed: Use only such items of furniture which can safely bear the weight of the
device. Ensure that the device does not project beyond the edges of the supporting
furniture. Do not place the device on tall furniture (e.g. bookshelves) without securely
anchoring both items, i.e. furniture and device. Explain to children the hazards involved in climbing on furniture to reach the
device or its controls.
When installing the unit on a shelf or in a cupboard it is essential to provide an adequate flow of cooling air, to ensure that the heat produced by the unit is dissipated effectively. Any heat build-up will shorten the life of the unit and could be a source of danger. Be sure to leave free space of 10 cm around the unit for ventilation. If the system components are to be stacked then the amplifier must be the top unit. Do not place any object on the top cover.
The unit must be set up in such a way that none of the connections can be touched directly (especially by children). Be sure to observe the notes and information in the section 'Installation and Wiring'.
The terminals (marked with the -symbol) can carry high voltages. Always avoid touching terminals and sockets and the conductors of cables connected to them. Unless ready-made cables are used, all cables connected to these terminals and sockets must always be deployed by a trained person.
The device is intended to be connected to mains outlet with protective earth connector. Please connect it only with the mains cable supplied to a properly installed mains outlet with protective earth connector. The power supply required for this unit is printed on the mains supply socket. The unit must never be connected to a power supply which does not meet these specifications. If the unit is not to be used for a long period disconnect it from the mains supply at the wall socket.
Mains leads must be deployed in such a way that there is no danger of damage to them (e. g. through persons treading on them or from furniture). Take particular care with plugs, distribution panels and connections at the device.
Unplugging the mains plug will disconnect the device from the mains for service and repair. Please make sure that the mains plug is easily accessible.
Liquid or particles must never be allowed to get inside the unit through the ventilation slots. Mains voltage is present inside the unit, and any electric shock could cause serious injury or death. Never exert undue force on mains connectors. Protect the unit from drips and splashes of water; never place flower vases or fluid containers on the unit. Do not place naked flame sources, such as candle lights on the device.
Like any other electrical appliance this device should never be used without proper supervision. Take care to keep the unit out of the reach of small children.
The case should only be opened by a qualified specialist technician. Repairs and fuse replacements should be entrusted to an authorised specialist workshop. With the exception of the connections and measures described in these instructions, no work of any kind may be carried out on the device by unqualified persons.
If the unit is damaged, or if you suspect that it is not functioning correctly, immediately disconnect the mains plug at the wall socket, and ask an authorised specialist workshop to check it.

Over voltage

The unit may be damaged by excess voltage in the power supply, the mains circuit or in aerial systems, as may occur during thunderstorms (lightning strikes) or due to static discharges. Special power supply units and excess voltage protectors such as the
'Power Bar' mains distribution panel offer some degree of protection from damage to equipment due to the hazards described above. However, if you require absolute security from damage due to excess voltage, the only solution is to disconnect the unit from the mains power supply and any aerial systems. To avoid the risk of damage by overvoltages we recommend to disconnect all cables from this device and your HiFi system during thunderstorms. All mains power supply and aerial systems to which the unit is connected must meet all applicable safety regulations and must be installed by an approved electrical installer.

Approved usage

The device is designed to operate in a temperate climate and altitudes up to 2000 m above sea level. The range of permissible operating temperatures is
+10 ... +35°C. This device is designed exclusively for reproducing sound and/or pictures in the domestic environment. It is to be used in a dry indoor room which meets all the recommendations stated in these instructions. Where the equipment is to be used for other purposes, especially in the medical field or any field in which safety is an issue, it is essential to establish
the unit's suitability for this purpose with the manufacturer, and to obtain prior written approval for this usage.

Approval and conformity with EC directives

In its original condition the unit meets all currently valid European regulations. It is approved for use as stipulated within the EC. By attaching the CE symbol to the unit declares its conformity the EC directives and the national laws based on those directives. The declaration of
conformity can be downloaded from www.ta-hifi.com/DoC. The original, unaltered factory serial number must be present on the outside of the unit and must be clearly legible! The serial number is a constituent part of our conformity declaration and therefore of the approval for operation of the device. The serial numbers on the unit and in the original documentation supplied with it (in particular the inspection and guarantee certificates), must not be removed or modified, and must correspond. Infringing any of these conditions invalidates conformity and approval, and the unit may not be operated within the EC. Improper use of the equipment makes the user liable to penalty under current EC and national laws. Any modifications or repairs to the unit, or any other intervention by a workshop or other third party not authorised by , invalidates the approval and operational permit for the equipment. Only genuine accessories may be connected to the unit, or such auxiliary devices which are themselves approved and fulfil all currently valid legal requirements. When used in conjunction with auxiliary devices or as part of a system this unit
may only be used for the purposes stated in the section 'Approved usage'.

Disposing of this product

The only permissible method of disposing of this product is to take it to your local collection centre for electrical waste.

FCC Information to the user
(for use in the United States of America only)

Class B digital device instructions:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different form that to which
the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.

Network Configuration

General Information
Compatible hardware and UPnP servers

All network settings are carried out in the system settings under the menu item Network.
If the MP 2000 R is not connected to a wired network via its LAN port, the WiFi module is activated and the Network menu displays the menu items for setting up the WiFi connection.
In the following sections we assume that a working home network (cable network of WiFi network) with router and (DSL) Internet access is present. If you are unclear about some aspect of installing, setting up and configuring your network, please address your queries to your network administrator or a network specialist.

The marketplace offers a vast number of routers, NAS devices and USB hard discs made by a very wide range of manufacturers. equipment is generally compatible with other makes of machine which bear the UPnP label.

Network settings menu

All network settings are entered in the Network Configuration menu. This menu will vary slightly in appearance depending on the type of your network, i.e. whether you have a wired (LAN) or wireless (WLAN) network.
If in the Network Configuration Menu the entry 'Network IF Mode' is set to 'auto', the MP 2000 R will check automatically if a LAN connection to a network is present. If a LAN connection is found, the machine will assume that this is to be used, and displays the network configuration menu for LAN networks. If no LAN network is connected, the MP 2000 R activates its WLAN module and displays the WLAN configuration menu when you call up the configuration menu. The menu for a WLAN network includes a number of additional menu points. The following sections explain how to use the menu, and the meaning of the individual menu points.

Opening the network settings menu

Open the System Configuration menu by pressing the button on the remote control handset or the button on the front panel of the
MP 2000 R. Use the / buttons to select the "Network" menu item, then confirm by pressing the button.

Operating the nenu, changing and storing IP addresses

Use the / buttons in the menu to select the network parameter to be changed, and activate the entry with the button.

You can now change the setting using the following buttons, depending on the type of setting:

/ button

for simple selection (ON / OFF)

Numeric buttons to for entering IP addresses

Alpha-numeric input

for entering text

When the setting process is complete, or when you have entered the complete

address, press the button to confirm your action.

Alpha-numeric entry

At certain points, e.g. for entering server names or passwords, it is necessary to input series of characters (strings). At such points you can enter letters, numbers and special characters by repeatedly pressing the numeric buttons on
the SRC1 remote control handset, as when writing SMS news. The assignment of letters to the buttons is printed below the buttons. Special characters can be accessed using the and buttons:

0 + - * / ^ = { } ( ) [ ] < >

. , ? ! : ; 1 \ " ' _ @ $ % & # ~

Use the blue button for toggling between numbers, capitals and lowercase letters. The bottom line of the screen shows which input mode is currently selected.
At certain points (e.g. DNS server name) it is possible to enter both an alphanumeric string and an IP address. At these points an IP address should be entered like a string (with separating dots as special characters). In this case an automatic check for valid address ranges (0 ... 255) is not carried out.

Closing the menu

Once you have correctly set all the parameters, select the menu item 'Store and exit?', then press the button. This action causes the MP 2000 R to accept the settings, and you should see the available network media sources (Internet radio, UPnP-AV server, etc.) displayed in the main menu.

Interrupting the menu without storing the settings

At any time you can leave the network configuration menu without making any changes to the network settings: this is done by pressing the button,
which takes you to the menu item 'Store and exit?'. If you wish to quit at this point without saving, use the / buttons to select the `Discard and exit?' menu item, then confirm with the button.

The Configuration for a Wired Ethernet LAN or Power-Line LAN connection

Setting the Parameters for a Wired Network

Connect the MP 2000 R to an operational network or Power-Line modem using the LAN socket on the back panel.
Switch the MP 2000 R on, Open the System Configuration menu by pressing the button on the remote control handset or the button on the front panel of the MP 2000 R.
Use the / buttons to select the menu point "Network", then confirm your choice with the button.
You should now see the menu reproduced below, displaying the network parameters. In the title line the message 'LAN' should appear, indicating that the machine is connected to a wired LAN. If you see 'WLAN' at this point instead, please check your network connection, and ensure that the network is switched on and operational.
You can now select the individual menu points and adjust them to match your network conditions. The illustration below shows the possible button inputs after each menu item.
Possible entries

Menu Point MAC Connection state DHCP
IP Subnet mask Gateway DNS
52

/ : (0...9):
(0...9, A...Z):

Switching ON / OFF Numeric input, separating dots are automatically generated; input limited to valid addresses Alpha-numeric input and special characters. IP - separating dots must be entered as special characters.

The parameters illustrated above are only typical values. Addresses and settings may require different values for your network.

Description
The MAC address is a hardware address which uniquely identifies your machine. The address displayed is determined by the manufacturer, and cannot be altered.
Shows the connection state: WLAN, LAN or not connected.
ON If your network includes a DHCP server, please select the ON setting at this point. In this mode an IP address is automatically assigned to the MP 2000 R by the router. The screen shows only the MAC address and the message DHCP state ON. In this case the address input fields shown in the illustration do not appear in the menu.
OFF If your network does not include a DHCP server, please select the OFF setting. In this mode you must configure the following network settings manually. Please ask your network administrator for the addresses to be entered for your network.
IP address of the MP 2000 R
Network mask
IP address of the router
Name / IP of the name server (optional)

Store and exit? Discard and exit?

Stores the network parameters, and restarts the MP 2000 R with the new settings.
Closes the menu: data already entered is discarded.

The Configuration for a WLAN connection

Configuration using the WPS function
Manual setup of the WLAN connection
Setting up the WLAN connection via the T+A app (TA Music Navigator)

Activate the WPS-function of the Router or Repeater to which you wish the MP 2000 R to be connected. For details please refer the manual of the device in question.
Start the WPS-Autoconnect function of the MP 2000 R within 2 minutes.
Use the cursor up / down buttons to select the menu point "WPSAutoconnect", then confirm your choice with OK - the button.
After the connection is established, the line Status shows the connected WLAN network.
Finally select the "Store and exit?" menu point and press the OK button to accept the settings.
Select the Search for WLAN menu item and confirm this with the OK button.
A list of the WLANs found appears. Use the Up / Down cursor buttons to select the WLAN to which the
MP 2000 R is to be connected, and confirm with the OK button. Enter the network password (passphrase) and confirm your entry with
the OK button. Confirm and save the settings by selecting Save and exit?
Select and confirm with OK. Select the Save and exit ? menu item again and confirm the settings
again by pressing the OK button.
The MP 2000 R has an access point function to make it easy to set up the network connection. This is activated automatically if the device is neither connected to the network by cable nor has a WLAN network been configured. This status can be restored at any time, by resetting the MP 2000 R to the factory settings (see chapter Basic settings of the MP 2000 R). Proceed as follows to set up the device:
Android users
Connect the smartphone or tablet PC on which the T+A Music Navigator app is installed to the WLAN access point.
The name of the network (SSID) begins with T+A AP 3Gen_.... A password is not required.
Start the app. Permission required for standard. The app recognises the access point and automatically starts the
setup wizard. To set up the WLAN, you must go through the individual steps of the
app's setup wizard. Exit the app and then connect the smartphone or tablet to the
previously set up Wi-Fi. After restarting the app, it will automatically search for the MP 2000 R. As soon as the MP 2000 R has been found, it can be selected for
playback.
iOS (Apple) users
The MP 2000 R supports the Wireless Accessory Configuration (WAC).
Switch on the MP 2000 R.
Open the Settings/Wi-Fi menu on your iOS mobile device.
As soon as the device has started, you will find an entry starting with SET UP NEW AIRPLAY SPEAKER MP 2000 R -xxxxxx under Set up new AirPlay speaker.
After selecting this entry, you can select the network to which your MP 2000 R can be connected.
After confirming the selection, the network configuration data is automatically transferred to the device and the MP 2000 R connects to the selected network.

Firmware update

General information

For updating the firmware of the MP 2000 R there is a convenient method which requires an existing Internet connection If you are operating the MP 2000 R in conjunction with a PA 2x00 R, the machine can also be updated via the R2Link connection.
The wiring diagram for the machine is shown in 'Appendix A'.
The following section describes the exact method of updating the firmware in detail.

Updating via the Internet

Updating the firmware via the MP 2000 R's Internet connection
The basic requirement is a functioning network with router and access to a broadband Internet connection; the system must be operating.
Switch the machine on. Call up the System menu by pressing the button on the front panel.
Rotate the SELECT knob on the front panel to select the "Device info" menu point, and confirm your selection by pressing the SELECT knob.
If the MP 2000 R is connected to a PA 2x00 R via the R2Link connection, the Select Device menu appears at this point. In this case select the device to be updated by turning the SELECT knob, then press the SELECT knob to confirm your choice.
(If the MP 2000 R is not connected to a PA 2x00 R, the Software Update menu of the MP 2000 R appears directly.)
Select the "Update" menu point by rotating the SELECT knob, then press the SELECT knob to confirm your choice.
The Select option "WEB" should now be active (highlighted).
The firmware update can now be started by pressing the SELECT knob.
The screen displays the current state of progress of the update.
Once the update has been completed (duration around ten minutes) the device automatically switches itself off and restarts.
When the machine has restarted, the update is complete.
To ensure that the update was successful, access the "Device Info" menu point mentioned above, and check the new firmware status.
It is also possible to carry out the update process using the SRC1 remote control handset, as an alternative to operating the machine directly. The method of operating the menu using the handset is described in the chapter entitled "Basic settings of the MP 2000 R" (Using the remote control handset).
As an option the update can be completed via a LAN or WiFi connection. Detailed information on setting up Internet access can be found in the chapter entitled "Network configuration".
It is also possible to carry out the update process using the SRC1 remote control handset, as an alternative to operating the machine directly. The method of operating the menu using the handset is described in the chapter entitled "Basic settings of the MP 2000 R" (Using the remote control handset).

MP 2000 R / Supplementary Information

CD
R2 LINK Field strength
FM = Frequency Modulation Cable Network
MIX Muting = Hiss suppression Preset = station memory RDS = Radio Data System

Compact Discs (CD) are digital data media which need to be handled carefully. These are the basic rules: The surface of a CD should only ever be cleaned with a soft dry cloth. Never
wipe it in a circular motion, i. e. along the tracks. Never use petrol, paint thinners, disc cleaners or similar materials on
compact discs. CDs must be handled carefully in order to avoid serious damage to the
surface. Severely scratched surfaces, writing on the disc or applying selfadhesive labels may result in the CD player being unable to read the data. CDs should not be heated or bent. This means that they should be stored in a position and attitude which meet these requirements.
Control interface for remote control of systems.
The electrical field strength is a measurement of the level (strength) of the radio signal supplied by the antenna. In general terms, the higher the field strength of the tuned station, the better the reception quality. Signal field strength is determined primarily by the following factors: 1. Distance from radio transmitter 2. Obstacles (mountains etc.) between transmitter and receiver 3. Transmitter output power 4. Quality and direction of the receiver antenna system. Point 4 is of crucial importance here. It is impossible to obtain good reception with a poor aerial system. Your specialist dealer will be glad to advise you on the subject of installing or improving your aerial system, taking your specific local reception conditions into account.
All FM radio transmitters use the 'FM' method of modulation. This technology provides maximum possible sound quality and interference suppression.
When the MP 3000 HV's tuner was being developed the requirements of the European cable network were given high priority. The tuner copes very well with excessive signal levels, and its high selectivity avoids many of the problems involved with cable operation, without any reduction in reproduction quality.
In MIX-Mode (Shuffle) the titles of a CD or the titles of a program are played back in a random order.
The MP 2000 R features automatic hiss suppression which cuts out the annoying hissing sound between radio stations, and suppresses very weak stations which cannot be received with reasonable quality.
The MP 2000 R can store all the settings for stations, any of which can be recalled simply by pressing a button.
Many radio stations broadcast supplementary digital information simultaneously with the programme. The MP 2000 R is equipped with an RDS decoder, and displays the station name of RDS transmitters in plain text on its alpha-numeric screen. This is a great advantage when searching for particular stations.

SINGLE CD Standby Seek threshold 56

A Single CD` is a CD with smaller diameter and a shorter play time. The MP 2000 R can play back CD singles. Please insert these discs into the depression at the center of the disc tray.
The MP 2000 R can be switched on from the Standby state from the remote control handset.
The seek threshold is the minimum field strength value at which the automatic station search process halts. It is set at a level which ignores very weak transmitters.

Oversampling

Technical description Digital filters / Oversampling
The audio data on for example CDs is stored at a sampling rate of 44.1 - i. e. for each second of music 44.100 sampled values are available for each channel. In the MP 2000 R the audio data read from the CD is ,,multiplied" to a higher sampling rate (352,8 kHz) before it is converted back into analogueue music signals. This process delivers a very much better, more finely graduated signal to the converter, which can then be converted with correspondingly higher precision. The raised sampling rate is a calculating process for which there are many different mathematical methods. In almost all digital audio devices which exploit the advantages of increased digital sampling rate a process known as a FIR filter is employed for this purpose. At we have been carrying out research for more than ten years, aimed at improving the oversampling process, because the standard FIR method has one drawback to set against its indisputable advantages: it adds small pre- and post-echoes to the music signals. At we have developed mathematical processes (known as Bezier polynomial interpolators) which do not share this disadvantage. For this reason they should sound better and more natural than the usual standard process. Since the calculating procedure employed by us is considerably more complex than the standard method, the MP 2000 R features a highperformance digital signal processor (DSP) which carries out the over-sampling process with immense precision (56 bit) using special algorithms developed by . The freely programmable DSP which we use is capable of carrying out the oversampling process using any method of calculation. For this reason we have implemented a slightly modified Bezier process (filters 3) in the MP 2000 R in addition to the pure Bezier process (filter 4), together with two variants of the standard process (filter 1 and filter 2). For more information on the different processes please refer to the next section. You can switch between the various algorithms, then decide for yourself which of the filters gives the results you prefer.
Oversampling 1 (Standard FIR Filter)
The long FIR filter is the standard oversampling process in digital technology, offering extremely linear frequency response, very high damping, linear phase characteristics and constant group delays. The disadvantage is the pre- and post-echoes which are added to the signal. These ,,time range errors" tend to affect the music signal's dynamics, precision and naturalness, and reduce spatial orientation.

Frequency response and transient characteristics of the long FIR filter

Oversampling 2 (Impulse optimised filter) Shortening the filter (lower coefficient) reduces the time range errors, albeit combined with a slight loss of linearity in the frequency range and damping performance.
Frequency response and transient characteristics of the short FIR filter Oversampling 3 (Bezier-interpolator plus IIR-filter) In this process an ideal Bezier interpolator is combined with what is known as an IIR filter. This eliminates the problematic pre-echo of the FIR method. This process produces highly ,,analogueue" system characteristics, with a sound quality and measured performance similar to those of good analogueue record players.
Frequency response and transient characteristics of the Bezier interpolator plus IIR filter Oversampling 4 (pure Bezier interpolator) This process delivers a perfect reconstruction of the original music signal. It exhibits no pre- or post-echoes of any kind, and does not add coloration or timing errors to the original signal. In sonic terms this method offers an impressive blend of naturalness, good dynamics and accuracy.
Frequency response and transient characteristics of the Bezier interpolator
58

Network Terminology

General information
DNS Ethernet-LAN Gateway Client DHCP IP-Adress

The Switch ensures that the individual components within a network are connected correctly. This is only possible if it can identify each device within the network unambiguously; this is the reason why every component is assigned a form of "house number" (IP address). The IP address consists of four number blocks each containing three digits separated by dots (e.g. 192.168.1.1).
Each of the individual number blocks may contain values between 1 and 254 (the values 0 and 255 are reserved for certain special functions, and should therefore not be used). However, if the network is to operate reliably, the network owner should only select addresses designed for home network use i.e.: the first two number blocks should always be 192.168.xxx.xxx; the third block can be selected without restriction within the above limits (but should be the same for all devices on the network), and the fourth block must distinguish each device uniquely (e.g.: MP 2000 R 192.168.001.001, NAS: 192.186.001.002, PC: 192.168.001.003, ...).
If this local network is to include Internet music sources (Internet radio) as well as physical devices, then the MP 2000 R must have access to the Internet. This facility is provided by a device such as a router with connection to the DSL network. This router is also a constituent part of the network, and is assigned its own IP address. The MP 2000 R must also be informed of the address of the router (Gateway) to enable it to gain access to the outside world.
Please ensure that the first three blocks of the Device IP, Gateway IP and DNS
1 share the same address space (e.g. 192.168.0.xxx). The fourth block assigns a unique address (house number) to the components in the local network. This number must not be present more than once in the local network. The Device IP mask should always be assigned the address 255.255.255.0.
The Domain Name System (DNS) is one of the most important services on the Internet. Its primary task is to convert "Internet addresses", such as www.taelektroakustik.de, into the associated IP address. In most home networks the router carries out the DNS function. If you decide to configure your network manually (without DHCP), then simply enter the address of your router as the DNS address when configuring the network.
Wired network. Interference-free network technology, with the drawback of having to deploy a network cable.
The computer or router in your network which is responsible for managing data traffic between your home network and the outside world (i.e. the Internet).
Network device which obtains data from the network, decodes it and converts it into, for example, analogueue music signals which can then be reproduced via an amplifier and loudspeakers. Streaming Clients also contain functions for displaying media content, and for navigating on the Internet or servers.
DHCP is an abbreviation of Dynamic Host Configuration Protocol. The primary purpose of DHCP is to enable Clients to obtain your network configuration automatically from a server or router.
Network address. Each device in the network requires an IP address at which it can be accessed, and by which it is unambiguously identifiable. No individual network address may be present more than once. This is important if you are entering network addresses manually. If the addresses in your network are assigned by DHCP, you do not need to worry about IP addresses at all, as the DHCP server manages the addresses automatically without your intervention.

NAS (Network Attached Storage) Powerline-LAN
Proxy server
Router Server
UPnP-AV
WiFi (also W-LAN, Wireless LAN)
Compatible hardware and UPnP servers

Network storage facility. This is generally a very large-capacity (> 200 GB) storage device to which other devices have access. If the NAS server includes a UPnP-AV server service, then the MP 2000 R has access to media files stored on the NAS, and can play them back.
In a Power-Line LAN data is transferred via the existing mains power cabling. Devices known as "Power-Line modems" are required at the transmitting and receiving end. In most cases Power-Line offers relatively problem-free data transfer with adequate data rates for audio streaming. We recommend PowerLine modems with bit rates of 85 or 200 Mbit/s.
A Proxy or Proxy server is a computer in the network which is capable of carrying out data transfers faster and more efficiently, and can increase security through the use of access control mechanisms. Most home networks do not include a proxy server. In this case there is no need to enter a Proxy address when configuring the MP 2000 R network.
Central network device which creates and manages the connections between the network devices. In most networks the router also assumes the function of Gateway to the outside world.
Network device which provides data and services for other devices in the network. For example, a UPnP-AV server typically stores audio / video data, and makes it available to other devices (the Streaming Clients). Many UPnP-AV servers also offer functions such as cataloguing, and easy identification of media content using criteria such as artiste, album name, genre, etc.
Network protocol that makes media files available on the home network.
On PCs and NAS storage devices a UPnP-AV server software must be installed to enable the MP 2000 R to access media files stored on these devices.
Radio network. The network is connected by means of radio waves operating in the 2.4 GHz and 5 GHz frequency band. Radio networks are easy to install as no cables have to be deployed, but they are often problematic and unreliable especially when the transmission distances are substantial. Power-Line networks, which can also be installed without separate cabling, are a better choice in many situations. In every case the deployment of a network cable is the most reliable and problem-free technology for data transfer.
The marketplace offers a vast number of routers, NAS devices and USB hard discs made by a very wide range of manufacturers. equipment is generally compatible with other makes of machine which bear the UPnP label. A list of devices which has checked for compatibility can be found on the Internet at: http://www.ta-hifi.de/fileadmin/software/e-serie/MP_HW_KOMP.pdf

Trouble shooting

Many problems have a simple cause and a correspondingly simple solution. The following section describes a few difficulties you may encounter, and the measures you need to take to cure them. If you find it impossible to solve a problem with the help of these notes please disconnect the unit from the mains and ask your authorised specialist dealer for advice.

Machine does not switch on (Display does not light up).

Cause 1: Mains leads not plugged in correctly.
Remedy: Check connection, push connector in firmly.

Tuner
Whistling or whispering noises from the speakers.
The RDS station name does not appear in the display.
The unit can be operated normally, but very few stations or none at all can be picked up.

Cause: The antenna lead is routed too close to a mains, remote control or audio signal cable. Remedy: Move the leads so that they are spaced well apart. Use the domestic (loft or outside) antenna or a cable connection.
Cause 1: The station is not broadcasting RDS information.
Cause 2: Reception is poor, interference is severe, or the field strength (signal strength) is low. Remedy: Select only those stations which can be received with a strong signal: hiss-free and without interference.
Cause: The antenna system or antenna cable is faulty. Remedy: Check the antenna lead for good contact at the antenna socket (at the wall) and in the back of the tuner. As a test, try using the system with a trailing antenna. If you can now receive stations reasonably well, we recommend that you call out an expert antenna technician to check your antenna system.

CD player
The screen displays the message 'No Disc' when you close the CD drawer.

Cause 1: CD not inserted correctly.
Remedy: Place CD centrally in the drawer, printed face up.
Cause 2: CD dirty.
Remedy: Clean disc and insert again.
Cause 3: CD damaged in the Table of Contents (TOC) area.
Remedy: No remedy; the CD is unusable.
Cause 4: The CD player has become very cold (e. g. in transit) and condensation has formed on the laser sensor optics.
Remedy: Allow the unit to warm up for about an hour in a warm, well ventilated location.

CD playback stops or 'jumps'.

Loud humming noise from the loudspeakers.

Streaming Client

The streaming client cannot connect to a network.

On the display the

indication

Cannot

connect

network...'

is displayed.

The message 'No Data Available' is displayed

Cause 1: CD damaged or dirty. Remedy: Clean CD. A damaged CD cannot be repaired!
Cause 2: The CD uses a copy protection system which does not conform to the CDAudio standard (Red Book Standard) Remedy: Take back the CD to the dealer and ask for a proper CD according to the general CD standard.
Cause: Poor contact between the Cinch plugs and sockets, or a faulty Cinch cable. Remedy: Please check all connections and cables thoroughly.
Cause 1 (cable LAN): Network cable not properly connected Remedy: Connect network cable, check connection to router
Cause 2 (wireless LAN): WLAN antenna not connected or placed in a location with bad reception quality Remedy: Connect WLAN antenna properly and find a location with good reception quality. Set the transmission power output of your WLAN router to maximum. Try to establish a network connection first in a location close to the WLAN router. If this succeeded try to connect to WLAN from a more remote location. Experiment with antenna position and try to find a location with better reception quality.
Cause 3 (wireless LAN): WLAN reception quality bad (low field strength). Possibly too much attenuated by walls/ceilings on the transmission path. Remedy: Optimize location of receiver and transmitter antennas. Alternative: If transmission problems persist a so called ,Power Line` network might be good alternative to establish a good and stable network connection. The best, safest and most secure network however will always be a cable LAN network.
Cause 4: Network parameters not properly configured. Remedy: Configure the network parameters correctly (see chapter 'Network configuration').
Cause 5 (operation without network connection): For proper operation the MP 2000 R needs at least one properly connected network device. This can be a LAN or WLAN network or a USB storage device. Remedy: If the MP 2000 R shall be operated without network (LAN / WLAN) please connect at least a USB stick.
Cause: The music file on the storage device or on the music server was deleted or the internet radio station is not available at the moment. Remedy: Choose another music title or radio station. If the station or title is not available any more it should be deleted from the Favourites List (if stored there).

The message 'network problems restarting' is displayed
Transmission interruptions occur when listening to internet radio stations.
Some internet radio stations cannot be received
Bad sound quality at certain internet radio stations
USB Storage device is not recognised
Problems occur with highresolution audio formats (HD audio) (FLAC and WAV).

Cause: Network problems in your home network or on the internet occurred; the connection was interrupted. Remedy: When encountering a network problem or interruption the MP 2000 R will restart the network communication. After re-start please choose a music title or internet radio station and start playback.
Cause 1: The capacity of the internet radio station`s server is at its limit. Remedy: Choose a different station.
Cause 2: Network problems occurred. Remedy: Check your network (see above).
Cause: The internet radio station has been switched off, it transmits only at certain hours of the day or it has changed its internet address. Remedy: Try to get information from the website of the station regarding transmission hours and internet address (URL). Try to establish a connection to the station at a later time.
Cause: The station transmits with a low audio bandwidth (low bitrate). Remedy: Use stations transmitting at least at 128 kBit/s. This is the lowest recommended bitrate for adequate sound quality. For good sound quality we recommend high bitrates like 320 kBit/s
Cause 1: The storage device (especially USB hard discs without separate power supply) draws more electrical current from the USB interface than is permitted by the USB standard. Remedy: Only use USB storage devices that conform to the USB standard or use storage devices with own power supplies.
Cause 2: The storage device is not formatted with an appropriate file system. Remedy: The MP 2000 R accepts storage devices with FAT16 or FAT32, NTFS, Ext2, Ext3, Ext3 file systems. Note: For big music archives we recommend to use a NAS (network attached storage) device with a UPnP-AV server to which the MP 2000 R will connect via your home network.
Cause: The MP 2000 R is receiving audio data via a WLAN connection. WLAN connections do not provide reliable quality, and in most cases are not adequate for HD audio. Remedy: If you want to play back HD audio formats via a network connection, please use a LAN cable network.

Bluetooth
I can not connect my smartphone or similar via bluetooth anymore

Cause: Bluetooth pairing has an error and therefore it cannot be re-established.
Remedy: Delete all Bluetooth pairings in the MP 2000 R (See chapter "Basic settings"). Also delete the Bluetooth pairing in your device (e.g. smartphone). Then re-establish the connection.

General Show licenses

Legal Information
This product contains software in form of object code that is partially based on free software under different licenses. Details of the licenses used can be viewed on the device website using an Internet browser.
For license details see our website:
https://www.ta-hifi.de/support/license-information-g3/
You can display the exact address as follows:
Call up the system configuration menu by pressing the button. Then navigate to the "Device Info" menu item. Open it by pressing the
-button. Navigate to the menu item "Legal information" and open it with the
button. The pop-up window that now opens shows the address of your device.
The address is only displayed in the pop-up window if the device has a correctly configured network connection. For details on network configuration, see the "Network Configuration" section. To view the web page of the device, the device on which the Internet browser is started must be connected to the same network as the device.

Appendix A
Wiring diagram balanced (XLR) Wiring diagram unbalanced (Cinch / RCA)
65

Wiring diagram network, tuner, storage, PC
Attention!
A properly set up home network with router must be installed and in operation to use the MP 2000 R. For the use of internet radio a DSL access to the internet is needed. For questions regarding setting up your network and internet connection please ask your system administrator or any network specialist. *1 Music Server with UPnP-AV server software installed *2 Connection either via Cable-LAN or Wireless-LAN 66

Wiring diagram antenna connection
Note! Please note that the digital radio DAB+ and the analogue FM radio transmitting in different frequency ranges. Depending on the existing antenna configuration, it may therefore be necessary to combine the two ranges with a DAB+/UKW feed-in crossover. When using an indoor antenna, do not place it in close proximity to sources of interference such as cordless telephones, WiFi routers or LED lights.
67

Specification
CD-Player Formats Frequency response and dynamic Streaming Client Formats
Streaming services
Supported Media server Features Interfaces
Tuner (FM) Frequency range Sensitivity Overload margin Stereo channel separation RDS functions Tuner (DAB) Reception standard Frequency range Overload margin Sensitivity (BER = 10 4) Bluetooth Bluetooth standards Profiles Frequency band Max. transmit power
68

Appendix B
CD/DA, CD-R, CD-RW, CD-Text 2 Hz 20 kHz / 100 dB
MP3, WMA, AAC, OGG-Vorbis, FLAC, AIFF, ALAC, WAV PCM 32 ... 192 kHz, 16/24 Bit; MP3 up to 320 kBit airable radio und podcasts, Tidal, Qobuz, Deezer, Amazon Music HD, highresaudio, Tidal connect, Spotify connect, Apple AirPlay2, Plays with Audirvana, Roon UPnP 1.1, UPnP-AV and DLNA compatible Server, Microsoft Windows Media Connect Server (WMDRM10), Airable Internet radio, DLNA compatible Server Auto Network Config., Internet Radio Station database (automatic updates)
LAN: Gigabit Ethernet WLAN: IEEE 802.11a/b/g/n/ac/ax 2x2 MIMO
2.412 2.472 GHz (2.4GHz ISM Band, 13 Channels) Channel 1 Channel 13 North America FCC, Japan MIC, Europe ETSI 20MHz bandwidth 5.180-5.825 GHz (5GHz UNII-1/2/3 Band, 24 Channels) North America (IC and FCC): 5.180-5.600 GHz, 5.650-5.825 GHz Europe, Japan (ETSI and MIC): 5.180-5.700 GHz · max gain in 2.4GHz band: 3.2dBi · max gain in 5 GHz band: 4.25dBi up to 17dBm (at antenna terminal)
FM Radio 87,5 108 MHz (Europa / US) 76 90 MHz (Japan Version))
Mono (26dB S/N) 0,9 µV, Stereo (46 dB S/N) 40 µV 103 dB µV, 50dB Stationname, Radiotext
DAB, DAB+ 168 240 MHz (Band III) 103 dB µV, 2,5 µV
Bluetooth standard BT 4.2 A2DP 1.2 (Advanced Audio Distribution Profile), AVRCP 1.5 (Audio Video Remote Control Profile) / aptX ® , MP3, SBC, AAC. 2,4 GHz +4dBm (2,5 mW)

Connections Analogueue outputs asymmetric co-axial (RCA) symmetric (XLR) Output digital
Digital inputs

2,2 Veff / 50 Ohm 4,4 Veff / 50 Ohm 1x coax, IEC 60958 (LPCM) 4x S/P-DIF: 2x standard coax (192 kSps /24 bit) and 2x optical TOSLink (96 kSps /24 bit)
1x USB: Device-Mode - up to 384 kSps / 32 bit (LPCM) and DSD512*, supports asynchronous data transfer.
2x USB master-mode for USB-mass storage devices (USB stick or VFAT formatted harddisc)
* DSD256 and DSD512 only with a Windows PC with appropriate driver
installed.

D/A-Converter PCM Upsampling DSD Analogue filter
Frequency response
Total harm. distortion Signal : noise ratio, A-weighted: Channel separation

Double-Differential-Quadruple-Converter with 4 D/A converters per channel, 32-Bit Sigma Delta, 352,8 kSps / 384 kSps.

Programmable Digital Signal Processor with 4 selectable oversampling algorithms: FIR short, FIR long, Bezier/IIR, Bezier

True-1Bit DSD D/A-Converter native bitstream

Phase-linear Bessel filter 3rd order, switchable 60...120 kHz (according to sample rate)

PCM 44.1 kSps: 2 Hz - 20 kHz

PCM 48 kSps: 2 Hz - 22 kHz

DSD 64: 2 Hz - 44 kHz

PCM 96 kSps: 2 Hz - 40 kHz

DSD 128: 2 Hz - 60 kHz

PCM 192 kSps: 2 Hz - 80 kHz

DSD 256: 2 Hz - 80 kHz

PCM 384 kSps: 2 Hz - 100 kHz

DSD 512: 2 Hz - 100 kHz

< 0.001 %

110 dB

Power requirement Power consumption

100 - 240 V~ , 50-60 Hz max. 40 W Standby < 0,5 W

Dimensions

8,2 x 46 x 40 cm (H x W x D)

Accessory

Infrared remote control SRC1, W-LAN aerial, RCA cord, XLR cord, power cord, R2-Link-Cable, user manual
We reserve the right to alter specifications.

elektroakustik GmbH & Co. KG Planckstraße 9 11 D - 32052 Herford
T +49 (0) 5221 / 7676-0 F +49 (0) 5221 / 7676-76
info@ta-hifi.com www.ta-hifi.com

References

Microsoft Word 2013