Getting Started
Follow these three steps to set up your TP-LINK Smart Plug:
Download the TP-LINK Kasa app
Download the Kasa app from the [App Store] or [Google Play Store].
Connect mobile device to your Wi-Fi network
Connect your mobile device to your Wi-Fi network using your [Settings icon] and [Wi-Fi icon]. Note: The Smart Plug can only connect to a 2.4GHz network.
Launch Kasa and follow the app instructions
Launch the Kasa app and follow the on-screen instructions for Quick Setup to enjoy your smart plug.
Button
The button on the Smart Plug is used for configuration and reset:
- Press and hold the button until the Wi-Fi LED blinks amber and green alternately (about 5 seconds) to initiate the App-Config process.
- Press and hold the button until the Wi-Fi LED blinks amber quickly (about 10 seconds) to reset the Smart Plug to factory defaults.
LED Indicators
Wi-Fi LED Status:
- Blinking Amber and Green: App-Config mode initiated.
- Quick Blinking Green: Connecting to the network.
- Solid Green: Connected to the network.
- Quick Blinking Amber: Factory reset.
- Solid Amber: Rebooting.
- Solid Red: No network connection.
Power LED Status:
- Solid Green: The Smart Plug is switched on.
- Off: The Smart Plug is switched off.
Frequently Asked Questions (FAQs)
1. What devices can I control with the Smart Plug?
You can control lights, fans, humidifiers, portable heaters, and any small appliances in accordance with the Smart Plug's specifications.
2. What should I do when I can't turn devices on or off?
Make sure that the devices connected to the Smart Plug are turned on, and that the Smart Plug is connected to the network.
3. What should I do when the Wi-Fi LED is lit solid red?
A solid red indicates no network connection, or that the App-Config process has failed. You can:
- Check for interference or relocate the Smart Plug to another location within the signal range.
- Make sure that you connect the Smart Plug to the 2.4GHz network.
- Repeat the App-Config process.
- Factory reset the Smart Plug and try to add it again.
Technical Support
For technical support, advanced features, and usage tips for the Smart Plug, visit www.tp-link.com.
Safety Information
- When a product has a power On/Off button, the power On/Off button is one way to turn off the product. For products without the On/Off button, the only way to completely turn off the product is to disconnect the product or the power adapter from the power source. The disconnected device shall remain readily operable.
- Do not open this product or attempt to service it; it may expose you to dangerous high voltage or other risks. Opening a sealed component or sealed product/s will void the warranty. For product servicing, please contact us.
- Do not operate this product near water.
TP-LINK Three Years Limited Product Warranty
- For TP-LINK Branded Products Only.
- THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE (OR BY COUNTRY OR PROVINCE).
- TO THE EXTENT ALLOWED BY LOCAL LAW, THIS WARRANTY AND THE REMEDIES SET FORTH ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS.
- TP-LINK warrants the TP-LINK branded hardware product contained in the original packaging against defects in materials and workmanship when used normally in according with TP-LINK's guidelines for a period of THREE YEARS form the date of original retail purchase by the end-user purchaser.
