User Manual for Shenzhen Xiwxi Technology models including: S18, 2ASLT-S18, 2ASLTS18, S18, TWS Bluetooth Headset
SHENZHEN XIWXI TECHNOLOGY CO., LTD S18 TWS Bluetooth headset 2ASLT-S18 2ASLTS18 s18
CH
AD
S18
MFB
MIC
1. 2. 3. () 4. 5.S18
"QiiPhone" S18 WatchApple WatchiPhone
1. 2 2.
Siri IOS 3
31
5
1. 2.
1.TYPE-C 5V 1A 2.3
LED
1
1
\
61
51
+ /
2MFB 2MFB MFB MFB /MFB1 /MFB1 /MFB2s /MFB2s /MFB3
\-
V5.2+EDR A2DP,AVRCP,HFP,HSP
10m 2.402GHz~2.480GHz
6mm*2 16
50 4 5
40mAh 1
300mAh 1
4.2 g
......
10m
×
10m
1.. 2. 3. 4.-1060 5. 6. 7. 8. 9. 10.2A
!
EN
AD
S18
User Manual
Thanks for using our wireless electronic products. For a good user experience, please read the manual carefully before using the products. Notice: To avoid unnecessary troubles please do not disassemble these products by yourself and use the standard charger to charge.
Product overview
Indicator Light of earphones MFB Touch Button Microphone
Charging Case Indicator Light Magnetic Contacts
Earphone Cap
Ear caps
We provide three sizes of ear caps (large, medium and small). Please use the proper size of ear caps to fit your ears to get a better wearing experience.
L
M
Left Right
S
Earphone operation
Pairing Manual
1.Take out the two earbuds from the charging case and peel off the insulating film. 2.Put the earbuds into the charging case to charge (the earbuds are in charging state). 3.Take out the two earbuds, they will turn on and pair automatically and will be prepared for pairing to the phonecWhite indicator light flashes. 4.After successful paired the indicator of the slave earbud will go off and the indicator of Main earbud White indicator light flashes 5.Turn on the Bluetooth function on your phone and search}S18~and connect it.
Tips: If the earphones can't be found and not in the pairing mode, you can double click any earphones to enter the pairing mode.
Settings
Bluetooth
Bluetooth
Now discoverable as"Qi iPhone". MYDEVICES
S18
To pair Apple Watch with your iPhone, go to the Watch app.
please restore factory setting!
1.When the earphone is on with mobile phone unconnected, press the left and right button at the same time four times quickly. white lights will be on for 2 seconds and it will clear its memory and shut down. 2.Delete old pairing name and search again on the bluetooth of mobile phone.
Siri and other Voice Assistant IOS and part of the Android users can triple touch the left or right haptic button to turn on the voice assistant.
Turn ON
Take out the earbuds from the charging case or touch the haptic button for 3 seconds until the indicators flash White once.
Turn OFF
Put the earbuds into the charging case, they would turn off and star charging or disconnect the Bluetooth, it will turn off in about 5 minutes.
Charge
Note: Please put both earbuds in the charging case to fully charge them on first use.
Charging earbuds
White indicators flash when battery low, please charge in time. 1.Put both earbuds into the charging case,
they will charge automatically. 2.Charging will stop when earbuds are fully charged.
Charging Case
Orange indicator light flashes when battery low, please charge in time. 1.Plug the TYPE-C cable into the charging interface and the charging case will charge automatically . (When it is greater than 5V 1A, the charging case will adapt to the charger's current limit automatically) 2.If you do not use the charging case for a long time, please charge it to a fully charged state at least every 3 months.
LED indicator
Charging for case
Status Charging case charging Full battery Charging for earbuds Low Battery
Light Orange indicator light flashes
No light Orange indicator light flashes Orange indicator light flashes
Earbuds indicator
Status
Light
Turn on The white light flashes slowly after it is on for one second
Turn off The earphone will turn off after the white light flashes for 1 second
The earphones searching for each other
The white lights of both earphones flash slowly
The earphones
The light of the main earphone flashes.\
pairing successfully The light of the slave earphone goes out.
The earphone is connected to The white lights of both earphones the phone successfully(Standby) flash once circularly in 6 seconds.
Music play
No light
Low battery The white light flashes once per 5 seconds
Charging
White light on
Full battery
White light off
Button control
Power on Automatically turn on when take-out case
Power off Automatically turn off when back into case
Previous track double tap left earbud MFB Button
Next track
double tap right earbud MFB Button
Volume - Hold and press left earbud MFB Button
Volume + Hold and press right earbud MFB Button
Play / Pause
single tap any MFB Button
Answer the call
single tap any MFB Button
Hang up hold and press any MFB Button for about 2s
Reject call
hold and press any MFB Button for about 2s
Voice activated assistant tap any MFB Button 3 times
Warm notice
For any single earphone, when it is in standalone mode, you can't use it to play the previous song or decrease the volume.
Specifications
Version
V5.2+EDR
Support
A2DP, AVRCP, HFP, HSP
Transmission distance
10m
Frequency range
2.402GHz~2.480GHz
Speaker
6mm*2
Impedance
16
Standby time
50 hours
Talk time
4 hours
Playing time
5 hours
Earphone battery capacity
40mAh
Fully charged time
1 hour
Charging case battery capacity
300mAh
Charging time of charging case About 1 hour
Weight (single earbud)
4.2 g
Waterproof
Waterproof for daily life, you cannot submerge earbuds into water. Ideal for sweating it out at the gym, or you can wear these earbuds while washing face, running in the rain...but not use them while you are diving or swimming.
rain or water
swimming or diving
Signal transmission distance shown as below: 10m Signals is in normal transmission.
×
10m Signals will be interrupted.
Attentions
1.Please do not use this product while diving as water will block signal.
2.Do not use corrosive liquid to clean this product. 3..If this product is accidentally exposed to chemicals,
clean it with water 4.Do not use this product under extreme circumstances
for temperature below -10 degree Celsius or above 60 degree Celsius . 5.To avoid explosion, please do not throw this product into fire. 6.To avoid scratches, please do not touch the earbuds with sharp objects. 7.Do not insert objects into the earbuds, otherwise it would cause damage to the internal components. 8.Do not disassemble the earbud. 9. Please keep regular charge to earbuds, don't leave them become empty battery status to keep their lifetime. 10. Please do not charge products with power adapter over 2A current. Excessive current may cause the damage to battery.
Battery Warning
There is a built-in lithium battery in this product. To avoid explosion, do NOT expose the product to strong sunlight, fire or throw it into fire.
FCC Caution
JP
AD
S18
MFB
L
M
S
1. 2. 3. 4. 5. S18
Settings
Bluetooth
Bluetooth
Now discoverable as"Qi iPhone".
MYDEVICES
S18
To pair Apple Watch with your iPhone, go to the Watch app.
1 4 2 2Bluetooth
Siri IOSAndroid or Siri Sir
100
1. 2.
1.TYPE-C 5V1A 2.
LED
1
1
/
2
61
51
MFB
-
+
/ /
/
/
/
Siri/
V5.2+EDR
A2DP,AVRCP,HFP,HSP
10 m
2.402GHz~2.480GHz
6mm*2
16
50
4
5
40mAh
1
300mAh
1
4.2g
10m
×
10m
1. 2. 3. 4. -1060 5. 6. 7. 8. 9. 10. 2A 2A
128g 67*48mm
Adobe PDF library 15.00 Adobe Illustrator(R) 17.0