User Guide for John Lewis models including: John Lewis, Shelf, with, 8 Hooks, 57040191
Assembly instructions Place template (B) on the wall. Please use a spirit level to ensure that the template is straight. Drill the required holes in the wall using the template and follow the guidance on the 'Wall Fixings' section. Step 1 Step 2 Insert the wall plugs (C).
the simple step by step instructions. 2. Do not discard any of the packaging until you have checked that you have all the 3. Assemble this product on a soft surface. 4. tightened during initial assembly. Only upon completion of the assembly should all 5. fully tightened. 6. 7. Do not use any other tools other than those recommended to build ...
Assembly instructions Step 1 Place template (B) on the wall. Please use a spirit level to ensure that the template is straight. Drill the required holes in the wall using the template and follow the guidance on the 'Wall Fixings' section. Step 2 Insert the wall plugs (C). C B Step 3 Screw in the screws (D). D D A Step 4 Hang the hook rack (A) and mark the hole for the metal plate. Drill the hole as marked. Step 5 Insert the wall plug (C). Hang the hook rack (A) and screw the screw (D) through the metal plate. C A A D SHELF WITH 8 HOOKS USER GUIDE Care instructions Wipe clean with a soft cloth. Maximum load of 8kg. Warnings! The fittings pack contains small items which should be kept away from young children. John Lewis Partnership 171 Victoria Street London SW1E 5NN johnlewis.com Made in China Please retain these instructions for future reference Product Code: 57040191 Pre-assembly preparation Phillips head screwdriver and spirit level required Thank you for purchasing this product. Please read the instructions and check pack contents carefully before starting assembly of this product. A full checklist of components is given in this leaflet. If any components are missing please contact John Lewis and partners customer services. This product will take 1 person approximately 30 minutes to assemble. The fitting pack contains small items which could present a choking hazard and should be KEPT AWAY FROM YOUNG CHILDREN. Read this leaflet in full before commencing assembly. Fittings and parts checklist No. Picture A Name Qty No. Picture Hook Rack 1 B Name Qty Template 1 C Wall Plug 3D Screw 3 Helpful advice before you begin 1. We suggest you spend a short time reading through this leaflet and then follow the simple step by step instructions. 2. Do not discard any of the packaging until you have checked that you have all the 3. Assemble this product on a soft surface. 4. tightened during initial assembly. Only upon completion of the assembly should all 5. fully tightened. 6. Keep out of reach of small children. It contains small parts which might present a choking hazard. 7. Do not use any other tools other than those recommended to build this product. GUIDE TO WALL MOUNTING & FIXINGS KEY INFORMATION Warning: FIXINGS installer. Important - When drilling into the walls always check that there are no hidden wires or pipes etc. Take care when drilling on glazed tile surfaces in case the drill slips. You can use one of the following types of wall plug if your walls are made of brick, breezeblock, concrete, stone or wood. General Purpose wall plug Generally aerated blocks should not be used to support loads, general purpose wall plugs can be used. Plasterboard wall plug For use when attaching light loads on to plasterboard partitions. Cavity Fixing wall plug For use with plasterboard partitions or hollow wooden doors. Cavity Fixing Heavy Duty wall plug such as shelving, wall cabinets and coat racks. Hammer Fixing wall plug For use with walls stuck with plasterboard. The hammer retaining wall. Shield Anchor wall plug Heavy loads For use with heavier loads such as TV and Hi-Fi speakers and satellite dishes etc.Adobe Illustrator CC 22.0 (Windows) GPL Ghostscript 9.27