Samsung Galaxy Fit3 Quick Start Guide

Package Contents

The items supplied with the Galaxy Fit3 and their images may vary by region.

• Galaxy Fit3
• USB cable charging dock
• Quick start guide

Device Layout

Charging contacts: Located on the back of the device for charging.

Side button: A physical button on the side of the device.

Pressure vent: A small opening on the device.

Charging the Battery

After purchasing the Galaxy Fit3, connect the charger to turn on the power. The battery must be charged sufficiently before first use. Use only Samsung-approved chargers.

Note: The Galaxy Fit3 has no separate power key and is powered on when the battery is charged. The charger should remain close to the electric socket and be easily accessible while charging.

Accessing More Information

To view the full user manual and safety information, launch the Galaxy Wearable app on your mobile device and tap Menu (represented by three horizontal lines) → User manual. Alternatively, visit www.samsung.com/ca.

The method for accessing the user manual from the Galaxy Wearable app may vary depending on your mobile device. The user manual may not be available depending on the web browser or service provider.

Connecting the Galaxy Fit3 to a Mobile Device

On your mobile device, launch the Galaxy Store or Play Store and download the Galaxy Wearable app. Launch the app and follow the on-screen instructions to complete the connection. Connection methods and screens may vary depending on your mobile device and software version. Supported mobile devices and features may vary depending on your region, service provider, and device manufacturer.

Notice for Measuring Heart Rate

When measuring your heart rate, wear the Galaxy Fit3 snugly on your arm above your wrist. Do not fasten the Galaxy Fit3 too tightly.

Heart rate sensor: Located on the rear of the device.

Important Notes:

• The accuracy of the heart rate sensor can be affected by user movements, personal physiology, measurement conditions, and surroundings. Take heart rate measurements when seated and relaxed.
• Do not look directly at the heart rate sensor's lights, as it may impair vision.
• If the device becomes hot to the touch, remove it until it cools. Prolonged skin contact with a hot surface may cause burns.

Taking Off the Galaxy Fit3

When taking off the Galaxy Fit3, pull down on the buckle and pull it out.

Important Safety Information

Warning: Follow the warning information provided below to prevent incidents such as fire or explosion.

• Do not expose the device to physical impact or damage.
• Use manufacturer-approved chargers, accessories, and supplies.
• Prevent the battery terminals from contacting conductive elements, such as metal or liquids.
• If any part of the device, such as the glass or acrylic body, is broken, smokes, or emits a burning odour, stop using the device immediately. Use the device again only after it has been repaired at a Samsung Service Centre.

Cautions: Follow the warnings below to prevent injury to people or damage to the device.

• Do not allow children or animals to chew or suck the device.
• The device can be used in locations with an ambient temperature of 0 °C to 35 °C. You can store the device at an ambient temperature of -20 °C to 50 °C. Using or storing the device outside of the recommended temperature ranges may damage the device or reduce the battery's lifespan.
• Do not use your device in a hot environment or near fire.
• Comply with all safety warnings and regulations regarding mobile device usage while operating a vehicle.
• Do not wear the device too tightly. Make sure to keep the device clean and dry. Though this device has met international safety standards, some people may experience skin irritation if they are allergic to certain substances.
• It is recommended not to use fixed graphics on part or all of the screen for extended periods. Doing so may result in afterimages (screen burn-in) or ghosting.

Maintaining Water and Dust Resistance

Your device supports water- and dust-resistance. Follow these tips carefully to maintain these features. Failure to do so may result in damage to your device.

• Do not expose the device to water moving with force.
• Do not use your device when diving, snorkeling, or participating in water sports in fast-flowing water.
• If the device or your hands are wet, dry them thoroughly before handling the device.
• If the device is exposed to fresh water, dry it thoroughly with a clean, soft cloth. If exposed to other liquids (salt water, pool water, soapy water, oil, perfume, sunscreen, hand cleaner, or chemical products like cosmetics), rinse with fresh water and dry thoroughly with a clean, soft cloth. Failure to follow these instructions may affect the device's performance and appearance.
• If the device is dropped or receives an impact, its water- and dust-resistant features may be damaged.
• Some features may not work properly if the device is used in water.

Certification Details: Your device has been tested and certified to be water- and dust-resistant in specific situations. It meets the requirements of water-resistance for up to 50 meters as described by the international standard ISO 22810:2010 and can be used in shallow water. It meets the requirements of dust-resistance as described by classification IEC 60529 IP6X.

Removing the Battery

To remove the battery, contact an authorized service centre. For your safety, do not attempt to remove the battery yourself. Improper battery removal may damage the battery and device, cause personal injury, and/or make the device unsafe.

Regulatory Information

FCC Part 15.19: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC RF Radiation Exposure Statement: This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

ISED Notice: This device complies with ISED (Innovation, Science and Economic Development Canada) licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.

Specific Absorption Rate (SAR) Information: Your device conforms to ISED standards that limit human exposure to RF energy. In normal use, the actual SAR is likely to be much lower than the maximum emission levels. For more SAR information, visit ISED's website or search for your device's ISED/FCC ID on ISED's equipment search page.

Correct Disposal: This device contains a Li-Ion battery. For safe disposal options, contact your nearest service centre. Do not disassemble, crush, or puncture the device. Do not dispose of it in fire. Be sure to dispose of your device properly. In some areas, the disposal of batteries in household or business trash may be prohibited. For information on Samsung's environmental commitments, visit www.samsung.com/ca.