[W] Westinghouse
Built Under Dishwasher
WSU6608XC | WSU6608KXC
Dimension and Installation Guide
Product Dimensions
The following diagram illustrates the overall dimensions of the built-under dishwasher. Key dimensions are labeled as W (Width), H (Height), D1 (Depth 1), and D2 (Depth 2). The diagram shows the appliance with its door open, indicating the space required.
[Diagram: A line drawing of a built-under dishwasher with its door open. Dimensions are indicated by arrows and labels: W for width, H for height, D1 for the depth from the front panel to the rear of the main body, and D2 for the total depth from the front panel to the furthest point at the back, likely including plumbing or electrical connections. The appliance is shown in a typical installation context.]
Installation Specifications
| Width (mm) | Height (mm) | Depth 1 (mm) | Depth 2 (mm) | |
|---|---|---|---|---|
| Cut out (mm) | 600 | 820 | 580 | - |
| Product (mm) | 598 | 815 | 570 | 1150 |
Connection Details
The following diagram shows the required cut-out space and connection points. It indicates the 90-degree angles for installation, the 80mm and 100mm clearances, and the location for inlet/outlet and electrical connections.
[Diagram: A detailed view of the installation space for the dishwasher. It shows a 600mm wide opening. The height of the opening is 820mm. The depth of the opening is 580mm. Arrows indicate 90-degree angles. Specific areas are marked for "Inlet/outlet area and electrical connection". Clearances of 80mm and 100mm are indicated.]
Important Information
These dimensions are a guide only. All measurements are in millimetres (mm). For complete installation instructions, refer to the manual provided with the product.
