1. USE (B HW)
Follow these steps for the initial use and daily operation of your coffee brewer.
- Preparation: Ensure the machine is properly connected and ready for operation.
- Filter Placement: Insert the round filter paper into the filter basket.
- Coffee Grounds: Add the desired amount of coffee grounds (e.g., 40-50 g/l).
- Brewing: Place the brewing basket onto the machine.
- Water: Fill the water tank with fresh water.
- Start Brewing: Press the start button. The machine will begin brewing.
- Hot Water Tap: For hot water, use the dedicated tap.
- Display: The display shows brewing status and options.
2. CLEANING, FREQUENTLY (B HW)
Regular cleaning ensures optimal performance and coffee taste.
- Emptying: Remove used coffee grounds and filter.
- Filter Basket: Clean the filter basket and its components.
- Exterior: Wipe down the exterior of the machine with a damp cloth.
- Brewing Chamber: Clean the brewing chamber.
- Drip Tray: Empty and clean the drip tray.
- Descaling Signal: The machine may indicate when descaling is required.
- Rinsing: After cleaning, rinse all parts thoroughly.
3. DESCALING COFFEE SYSTEM (B HW)
Descaling removes mineral buildup and is recommended approximately every 3 months or as indicated by the machine.
- Preparation: Ensure the machine is turned off and unplugged.
- Descaling Agent: Use a descaling agent specifically designed for coffee machines (e.g., RENEGITE). Follow the product instructions for mixing.
- Filling: Fill the water tank with the descaling solution.
- Running the Cycle: Follow the on-screen prompts or manual instructions to run the descaling cycle. This typically involves several brewing and rinsing phases.
- Rinsing: After the descaling cycle, rinse the machine thoroughly with fresh water multiple times to remove any residual descaling agent.
- Check Display: Ensure any descaling indicators are cleared.
4. DESCALING HOT WATER SYSTEM (B HW)
This process removes scale from the hot water system.
- Preparation: Turn off and unplug the machine.
- Descaling Agent: Prepare the descaling solution as per the product instructions (e.g., 100g RENEGITE per 1 liter of water at approx. 40°C).
- Filling: Fill the hot water system reservoir with the descaling solution.
- Running the Cycle: Activate the descaling program for the hot water system. This may involve specific button presses or menu selections.
- Rinsing: After the cycle, flush the hot water system with fresh water to remove all traces of the descaling agent.
5. INITIAL USE (B HW)
Prepare the machine for its first use.
- Unpacking: Carefully unpack the machine and remove all packaging materials.
- Placement: Position the machine on a stable, level surface.
- Water Connection: Connect the machine to a water supply if applicable, or fill the water tank.
- Power: Plug in the machine.
- First Rinse Cycle: Run a full brewing cycle with only water to rinse the system.
- Check Display: Familiarize yourself with the display and control panel.
6. PROGRAMMING (B HW) - OPERATOR
This section details how the operator can program various settings.
- Selection Keys: Use the selection keys (▲/▼) to navigate through options.
- Confirm: Press the 'Confirm' button to select an option.
- Cancel: Press the 'Cancel' button to exit or go back.
- Programming Options: Adjust settings such as brewing time, temperature, and water hardness.
7. PROGRAMMING (B HW) - PRINCIPAL USER
Advanced programming options for the principal user.
- Water Hardness Setting: Adjust the water hardness level (e.g., 1-14) for optimal brewing.
- Time Settings: Program specific brewing times or delays.
- Customization: Fine-tune various parameters according to specific needs.
- Saving Settings: Ensure settings are saved after adjustments.
8. ERROR CODES (B HW)
Troubleshooting common error messages displayed on the machine.
- Error Display: The machine will display an error code (e.g., 'Err', 'E3') if a problem occurs.
- Consult Manual: Refer to the specific error code in this manual for troubleshooting steps.
- Resetting: Some errors may require a reset of the machine.
