Futaba R603FS 3-Channel FASST Receiver
Futaba R603FS 3 channel FASST receiver is packed in this set.
Product Diagram
The diagram shows the Futaba R603FS receiver with its external antenna connected via a coaxial cable. The receiver unit itself is labeled R603FS and features the Futaba logo, "FASST 2.4GHz DIVERSITY" branding, and indicators for SW (Switch) and LED (Light Emitting Diode). The connectors are clearly labeled:
- 3: CH3 servo (CH3)
- 2: Throttle servo (CH2)
- 1: Steering servo (CH1)
- B/C: Power connector/DSC connector
- RS232C: (for factory use only)
An internal antenna is also indicated, with a note advising to keep it away from conductive materials such as metal and carbon, motors, ESCs, and other noise sources as much as possible.
R603FS Specifications
- Reception antenna: Diversity type (Two antennas: internal and external)
- Power requirement: 6V Nicd battery
- DSC function available
- RS232C port: (for factory use only)
- Size: 39x26x14mm (excluding a projection part)
- Weight: 14.1g
(Specifications are subject to change without prior notice.)
Compliance Information Statement (for U.S.A.)
This device, trade name Futaba Corporation of America, model number R603FS, complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
The responsible party for this device compliance is:
Futaba Service Center
3002 N Apollo Drive Suite 1, Champaign, IL 61822 U.S.A.
TEL (217)398-8970 or E-mail: support@futaba-rc.com (Support)
TEL (217)398-0007 or E-mail: service@futaba-rc.com (Service)
