NEATCELL Picosecond Pen

Warranty Card

Thank you very much for buying our products! In order to protect your interests, our company promises as follows: This product can enjoy one-year quality guarantee from the date of purchase. The warranty period for power supply is three months. All of them can enjoy lifelong maintenance if they meet the following terms.

Terms for Warranty:

Damage caused by non-human factors, natural disasters, etc.
Machine damage caused by non-error operation.
The whole machine has not been disassembled, modified and assembled before the product is sent to the factory for maintenance.
Maintenance by customer with completed warranty card.
Once the warranty card is altered, the warranty will be invalid.
Normal wear and tear of non-core parts and loss of function.

Customer Information:

Customer name: _________________________
Date of purchase: _________________________
Product Type and Number: _________________________
Distributors: _________________________
Contact number: _________________________

Product Qualification Certificate

Product name: _________________________

Product type: _________________________

Date of production: _________________________

Name of the relevant operating parts

Diagram showing the NEATCELL Picosecond pen with labels pointing to different parts: Power button, Energy display, Energy increase button, Laser outlet, Frequency mode display, Frequency selection button, and Power supply.

Operation method

General usage and precautions:

Plug in the power. The machine is energized, and the digital tube displays the frequency.
Press the frequency mode select button to select the frequency, then set the output energy size.
After setting, press the laser emission switch to output energy.
During operation, wear protective glasses.
Keep the machine clean and avoid contact with other contaminants.
No unauthorized operation of the hand.
After use, please keep it properly after cleaning.

Red light picosecond

After the normal display of the digital tube, press the frequency button. The current selection has three frequency modes: 1, 2, 3 light mode. Through the energy increase button to adjust the size, press the switch after the setting, the machine will run out of light and operate. After that, the machine can be turned off.

Blue light picosecond

After the power of the digital tube, the frequency button will be pressed, and the blue ray will have nine frequency modes (1 to 9) out of the light mode. Press the energy increment button to adjust the energy size, finish the setting and output the laser, and operate the closing machine. The blue light emits a laser every time.