Package Contents

• 1 x AP25 access point
• 1 x Wall/Ceiling mount bracket
• 1 x Ethernet cable

Inform your supplier if there are any incorrect, missing, or damaged parts. To return this product, repack this unit and other included materials into the original packaging before returning it to the supplier.

Installation

To install your AP25 access points, refer to the AP25 Access Points Installation Guide by scanning the QR code below or visit https://www.ArubaInstantOn.com/docs.

[QR code linking to the AP25 Access Points Installation Guide]

User Guide

For instructions on available functionality, setup and configuration on an AP25 access point, refer to its user guide by scanning the QR code in the previous section or visit Online Help available at https://www.ArubaInstantOn.com/resources.

End User License Agreement

The End User License Agreement (EULA) information for this product can be found at https://www.ArubaInstantOn.com/eula.

The Data Privacy and Security Agreement is available at https://www.ArubaInstantOn.com/dpsa.

Regulatory Model Number

AP25 RMN: APIN0515

Changes or modifications to this unit not expressly approved by Hewlett Packard Enterprise Company could void the user's authority to operate this equipment.

Contact Aruba

Main Site: https://www.ArubaInstantOn.com

Support Site: https://support.ArubaInstantOn.com

Aruba Instant On Community: https://community.ArubaInstantOn.com

North America Telephone: 1-800-943-4526

International Telephone: 1-408-754-1200

Contact Support: https://www.ArubaInstantOn.com/contact-support/

Copyright

© Copyright 2021 Hewlett Packard Enterprise Development LP

Open Source Code

This product includes code licensed under the GNU General Public License, the GNU Lesser General Public License, and/or certain other open source licenses.

A complete machine-readable copy of the source code corresponding to such code is available upon request. This offer is valid to anyone in receipt of this information and shall expire three years following the date of the final distribution of this product version by Hewlett Packard Enterprise Company.

To obtain such source code, send a check or money order in the amount of US $10.00 to:

Hewlett Packard Enterprise Company
Attn: General Counsel
6280 America Center Drive
San Jose, CA 95002
USA

Warranty

This hardware product is protected by an Aruba warranty. For more details, visit https://www.ArubaInstantOn.com/docs.

Regulatory Compliance

An upgrade of the AP software to the latest available version is recommended. This ensures that the AP supports the most up-to-date set of countries and regulatory specifications.

Aruba access points are classified as radio transmission devices and are subject to governmental regulation. The network administrator(s) is/are responsible for ensuring that this device operates in accordance with local/regional laws of the host domain. Specifically, access points must use channel assignments appropriate to the location in which the access point will be deployed.

Brazil

Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados.

Canada

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

France (Industrie Canada)

Cet appareil contient un ou plusieurs transmetteurs/récepteurs exempts de licence conformes aux RSS exempts de licence d'Innovation, Sciences et Développement économique Canada. L'utilisation de ce périphérique est soumise aux deux conditions suivantes: (1) Cet appareil ne doit pas produire d'interférences. (2) Cet appareil doit accepter toutes les interférences, y compris les interférences pouvant engendrer un fonctionnement indésirable de l'appareil.

European Union

The Declaration of Conformity made under RED 2014/53/EU is available for viewing at: https://www.hpe.com/eu/certificates. Select the document that corresponds to your device's model number as it is indicated on the product label.

Wireless Channel Restrictions (EU)

The 5150-5350MHz band is limited to indoor only in the following countries; Austria (AT), Belgium (BE), Bulgaria (BG), Croatia (HR), Cyprus (CY), Czech Republic (CZ), Denmark (DK), Estonia (EE), Finland (FI), France (FR), Germany (DE), Greece (GR), Hungary (HU), Iceland (IS), Ireland (IE), Italy (IT), Latvia (LV), Liechtenstein (LI), Lithuania (LT), Luxembourg (LU), Malta (MT), Netherlands (NL), Norway (NO), Poland (PL), Portugal (PT), Romania (RO), Slovakia (SK), Slovenia (SL), Spain (ES), Sweden (SE), Switzerland (CH), Turkey (TR), United Kingdom (UK(NI)).

RF Radiation Exposure Statement

This equipment complies with RF radiation exposure limits. This equipment should be installed and operated with a minimum distance of 13.78 inches (35 cm) between the radiator and your body for 2.4 GHz and 5 GHz operations. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Mexico

La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.

Ukraine

Hereby, Hewlett Packard Enterprise Company declares that the radio equipment type [The Regulatory Model Number [RMN] for this device can be found in Regulatory Model Number section of this document] is in compliance with Ukrainian Technical Regulation on Radio Equipment, approved by resolution of the CABINET OF MINISTERS OF UKRAINE dated May 24, 2017, No. 355. The full text of the UA declaration of conformity is available at the following internet address: https://certificates.ext.hpe.com/public/certificates.html.

United States

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit that is different from that to which the receiver is connected.

Consult the dealer or an experienced radio or television technician for help. Improper termination of access points installed in the United States configured to a non-US model controller is a violation of the FCC grant of equipment authorization. Any such willful or intentional violation may result in a requirement by the FCC for immediate termination of operation and may be subject to forfeiture (47 CFR 1.80). For additional safety and regulatory information about this product, refer to the AP25 Access Point Installation Guide.

Declarations of Conformity (English)

Simplified Declaration of Conformity

The Regulatory Model Number [RMN] for this device can be found in the Regulatory Compliance section of this document.

EU Declaration:

Hereby, Hewlett Packard Enterprise Company declares that the radio equipment type [RMN] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.hpe.com/eu/certificates.

UK Declaration:

Hereby, Hewlett Packard Enterprise Company declares that the radio equipment type [RMN] is in compliance with the UK Radio Equipment Regulations 2017 (S.I. 2017/1206). The full text of the declaration of conformity is available at the following internet address: http://www.hpe.com/eu/certificates.

RoHS Information

This product complies with the "India E-waste (Management) Rules, 2016" and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule II of the Rule.

European Union Notice: The Declaration of Conformity can be found at the website http://www.hpe.com/eu/certificates. (Search with the product model name or its Regulatory Model Number (RMN), which may be found on the regulatory label.) For important safety, environmental, and regulatory information, see the Safety and Compliance Information for Server, Storage, Power, Networking, and Rack Products guide, available at: http://www.hpe.com/support/Safety-ComplianceEnterpriseProducts.

RoHS Compliance Table (Simplified Representation):

Legend: O = Compliant, X = Non-compliant (exceeds limit or not exempted)

Note: The table in the original document uses 'O' and 'X' to denote compliance status. This simplified table reflects the general RoHS compliance statement.

Regulatory Marks: The document displays various regulatory marks including UK CA, CE, EAC, and ANATEL. These indicate compliance with regulations in the United Kingdom, European Union, Eurasian Economic Union, and Brazil, respectively.