LiftMaster SMART ELEVATOR ACCESS CONTROLS

1. CAP2D FOR ENABLING CALL ELEVATOR TO LOBBY BUTTON

The diagram illustrates the CAP2D controller's integration for enabling elevator calls to the lobby. The CAP2D is connected to the Elevator Controller, the Elevator Cab Panel (featuring a Call Button and Reader), and a Lobby Reader. Key connections include D0, D1, GND, 12V, RED, GRN, and BUZ signals to the Elevator Controller, Cab Panel, and Lobby Reader. The CAP2D also interfaces with the Elevator Machine Room via REX, COM, PRI Relay NO, PRI Relay COM, and Status signals, connecting to a CAPXM/XLV/XS unit. The myQ Community web portal connects to the CAP2D via a LAN connection. An optional configuration requires an additional access point on the CAP2D and on a Smart Video Intercom Device. A note advises contacting the Elevator Contractor for wiring to the elevator controller.

• The LiftMaster elevator control solution includes a cloud-based management solution, which facilitates configuration and management of the site and access control systems on site to provide fast and reliable access control.
• The LiftMaster elevator solution can be used in buildings where the access to hailing an elevator to the lobby floor is locked until a resident or guest is authenticated via their card/FOB, PIN codes or myQ® Community App. The users have access only if they have valid credentials and day/time is within their assigned schedule with default schedule being 24/7 Always Access.
• The solution also can be configured for an unlocked schedule (e.g. allows free access during the day but requires user credentials during the night).
• For integrated access, when user is granted access to the main entrance, the smart video intercom system can signal the CAP2D to enable the floors for the elevator cab.

⚠️ WARNING

• When CAP2D is powered off or goes through a reset, the floors are automatically disabled.
• Main floor must NOT be controlled due to emergency exit needs.
• Contact Elevator Contractor for wiring to the elevator controller.
• Connection to elevator controller to be completed by qualified elevator control technician.
• Not to be used as a motor controller for elevator applications.

2. ENABLING IN-CAB MULTIPLE FLOORS BUTTON

This diagram shows the CAP2D enabling multiple floors within the elevator cab. It features connections similar to the lobby call example, linking the CAP2D to the Elevator Controller, Elevator Cab Panel, and Lobby Reader. A "Cable bundle from cab to machine room" is indicated. The CAP2D also connects to the Elevator Machine Room (CAPXM/XLV/XS) and the myQ Community web portal via LAN. An optional setup requires an additional access point on the CAP2D and a Smart Video Intercom Device. The note to contact the Elevator Contractor for wiring remains relevant.

• The LiftMaster elevator control solution includes a cloud-based management solution, which facilitates configuration and management of the site and access control systems to provide fast and reliable access control.
• The LiftMaster elevator solution can be used in buildings where the access to certain floors are locked until a resident or guest is authenticated via their card/FOB, PIN codes or myQ® Community App. The users have access only if they have valid credentials and day/time is within their assigned schedule with default schedule being 24/7 Always Access.
• The solution also can be configured for an unlocked schedule (e.g. allows free access during the day but requires user credentials during the night).
• For integrated access, when user is granted access to the main entrance, the smart video intercom system can signal the CAP2D to Call Button for the elevator cab.

⚠️ WARNING

• When CAP2D is powered off or goes through a reset, the floors are automatically disabled.
• Main floor must NOT be controlled due to emergency exit needs.
• Contact Elevator Contractor for wiring to the elevator controller.
• Connection to elevator controller to be completed by qualified elevator control technician.
• Not to be used as a motor controller for elevator applications.

3. ENABLING CALL TO LOBBY AND PENTHOUSE BUTTONS

This diagram illustrates enabling call buttons for the lobby and penthouse floors using the CAP2D. It shows the CAP2D connected to the Elevator Controller, Elevator Cab Panel (Reader and Call Button), and a Lobby Reader. Connections include D0, D1, GND, 12V, RED, GRN, BUZ signals to the Elevator Controller, Cab Panel, and Lobby Reader. The CAP2D also interfaces with the Elevator Machine Room (CAPXM/XLV/XS) and connects to the myQ Community web portal via LAN. An optional setup requires an additional access point on the CAP2D and a Smart Video Intercom Device. The note to contact the Elevator Contractor for wiring is present.

• The LiftMaster elevator control solution includes a cloud-based management solution which facilitates configuration and management of the site and access control systems to provide fast and reliable access control.
• The LiftMaster elevator solution can be used in buildings where the access to hailing an elevator to the lobby floor is locked until a resident or guest is authenticated via their card/FOB, PIN codes or myQ® Community App. The users have access only if they have valid credentials and day/time is within their assigned schedule with default schedule being 24/7 Always Access.
• The solution also can be configured for an unlocked schedule (e.g. allows free access during the day but requires user credentials during the night).

⚠️ WARNING

• When CAP2D is powered off or goes through a reset, the floors are automatically disabled.
• Main floor must NOT be controlled due to emergency exit needs.
• Contact Elevator Contractor for wiring to the elevator controller.
• Connection to elevator controller to be completed by qualified elevator control technician.
• Not to be used as a motor controller for elevator applications.

1. ELEVATOR ACCESS CONTROL OPERATIONS

LiftMaster's CAP2D (Smart Access 2-Door Controller) provides a highly reliable elevator access control solution.

• Residents can use their card/fob or assigned pin code within the elevator cab to gain access to the restricted floors.
• Invited visitors can use their guest access pin code within the elevator cab to gain access to the restricted floors. The guest access feature allows residents the capability to provide limited access to their guests. Invited visitor can also use the link in the guest pass to a web browser to unlock the elevator cab floor buttons.
• Users with myQ® Community App can use their mobile device to enable access to the restricted floors. Hold the desired elevator cab to enable floor. Once unlocked, select floor on the elevator cab panel before the timer expires.

In addition to the CAP2D, LiftMaster provides an entire family of access control products including the CAPXLV, CAPXM and CAPXS. These Smart Video Intercoms devices provide features allowing resident to extend access to visitors who have not been provided guest access.

• Unexpected visitor can contact the resident via the smart video intercom's video call feature.
• When resident grants user access to the main entrance, the call elevator button or the elevator floor buttons are unlocked for the visitor for the configured duration.

2. ELEVATOR ACCESS CONTROL ADDITIONAL WIRING INFORMATION

WIEGAND INTERFACE

• D0, D1 and GND are mandatory connection between the CAP2D and the Reader/Keypad.
• The Reader/Keypad input voltage can be sourced by other devices instead of CAP2D if that is desired.
• The RED, GRN and BUZ provides audio and visual feedback to the user when they enter their credentials at the Reader / Keypad.

POWER AND ETHERNET INTERFACE

• The example wiring diagram shows CAP2D using PoE (single interface for both Ethernet and Power).
• If PoE is not available, the CAP2D can also use Ethernet with separate 12VDC input.

RELAY INTERFACE

• The CAP2D supports dry contacts with options to use NO or NC.
• Whether to use NO or NC will depend on the elevator controller system.
• For newer elevator controllers, proprietary logic is sometimes used to communicate between the cab panel and the elevator controller.
• These elevator controllers typically support an interface allowing access control systems to enable each floor. In this case, the CAP2D relay output (either NO or NC depending on elevator configuration) can be used to signal to the elevator controller which floors are enabled.
• These elevator controllers must be configured to accept the inputs to function properly.

⚠️ WARNING

• When CAP2D is powered off or goes through a reset, the floors are automatically disabled.
• Main floor must NOT be controlled due to emergency exit needs.
• Contact Elevator Contractor for wiring to the elevator controller.
• Connection to elevator controller to be completed by qualified elevator control technician.
• Not to be used as a motor controller for elevator applications.