Rivers Edge 35' Reflective Safety Rope

Operator's Manual

Model: RE789

Maximum Field Rating: 300 lbs

Important: Wear Your Harness!

Introduction

If you encounter any issues with your product or are missing parts, do not return to the retailer. Contact Rivers Edge® Customer Service Department at 800-345-6007 for assistance. For your safety, please read each section of these instructions carefully for proper attachment, use, and maintenance of this safety rope.

To ensure your personal safety, you must read these instructions before using this product. Failure to do so could result in serious personal injury or death. It is the user's responsibility to follow all provided instructions, warnings, and guidelines for installation, setup, and use.

If you have any questions or do not understand any instructions or warnings, please call 800-345-6007 before attempting to use the product.

Warranty Information

Rivers Edge (RETI) offers a one-year warranty for this product, applicable to the original owner with proof of purchase. The warranty begins on the date of purchase by the first retail consumer and covers the specified period. It applies to products that have not been modified, abused, or used in a manner deviating from their intended usage. Minor color fading and corrosion of painted surfaces due to paint removal or damage are not covered.

RETI offers no other express or implied warranty. Products requiring warranty work must be sent directly to RETI for service. To obtain warranty service or replacement instructions, you must get prior approval from RETI by calling customer service at 800-345-6007 or writing to: Ardisam, Inc., P.O. Box 755, 1730 Industrial Avenue, Cumberland, WI 54829, for a return material authorization number (RMA#). All items must be shipped prepaid.

RETI will, at its discretion, repair or replace any product meeting these conditions at no charge. RETI reserves the right to change models, specifications, and prices without notice.

This equipment is manufactured under strict quality and safety guidelines. Full understanding of the instructions and proper use are mandatory for user safety. RETI is not responsible for damages or injuries from improper use, modification, or use deviating from the product's intended purpose. RETI is also not responsible for injuries due to failure to read and adhere to instructions.

Direct any misunderstandings or questions regarding the product or its use to RETI before use. All Rivers Edge treestands are sold with a full body harness ("Fall Arrest System") meeting Treestand Manufacturer's Association ("TMA") standards. The owner is solely responsible for regularly inspecting the product for damage, improper installation, or conditions that could compromise safety. Failure to use with a Fall Arrest System may result in serious injury or death.

The owner must understand and follow the product's field weight rating and never exceed the maximum weight rating. RETI is not liable for malfunctions or injuries from normal wear and tear, improper use, maintenance, negligence, or accidents. When used safely as intended, this product will provide trouble-free service for its useful life.

Warnings

Set-up & Use Instructions

  1. Put on your safety harness, making all necessary adjustments and safety checks as per the manufacturer's instructions.
  2. Climb up to your desired height. Attach the safety rope to the tree just above the treestand by wrapping the knotted loop end around the trunk and pulling the rest of the line through the knotted loop until snug. [See Figure 1].
  3. Using the carabiner, attach your harness tether to the loop on the Prusik knot. Ensure the knot can move down the rope without interference. [See Figure 2].
  4. Descend the tree, regularly adjusting the Prusik knot so it remains just above you. DO NOT pull or hold the Prusik knot constantly while descending, as this may cause the safety rope to fail, resulting in injury or death.
  5. Once on the ground, disconnect your harness from the Prusik knot. Loosely tie the bottom of the safety rope to the base of the tree. Ensure the Prusik knot can still move freely from the top to the bottom of the tree. [See Figure 3].

Diagram Descriptions:

Figure 1: Illustrates attaching the safety rope to the tree trunk by wrapping the knotted loop end around it and pulling the line through the loop until snug.

Figure 2: Shows the harness tether attached to the loop on the Prusik knot with the carabiner in the locked position, allowing the knot to move freely along the rope.

Figure 3: Depicts the safety rope tied loosely to the base of the tree once the user is on the ground.

Prusik Knot Loops: The Prusik knot requires 6 loops for proper function. Inspect the knot before each use. Do not use if fewer than 6 loops are present.

Carabiner Lock: Ensure the carabiner is always in the locked position as shown in Figure 2 for safe operation.

Models: RE789 Reflective Safety Rope, RE789, Reflective Safety Rope, Safety Rope, Rope

File Info : application/pdf, 4 Pages, 663.63KB

PDF preview unavailable. Download the PDF instead.

1915002 Man1

References

Adobe PDF Library 16.0.5 Adobe InDesign 17.1 (Macintosh)