Creative Pebble Pro
Minimalist 2.0 USB Speakers with Bluetooth 5.3 and Adjustable RGB Lighting
Model No.: MF1710
Overview
The Creative Pebble Pro are minimalist 2.0 USB speakers designed for a compact desktop setup. They feature adjustable RGB lighting and multiple connectivity options, offering a blend of audio performance and aesthetic appeal.
Front View
The front view displays two speakers, labeled 'L' (Left) and 'R' (Right). Each speaker features a prominent circular driver at the top. The 'R' speaker is equipped with a volume knob and several control buttons and ports located on its rear and bottom surfaces.
Key Components and Controls
- a) 2.25" Full-range Driver: The primary audio driver responsible for sound output.
- b) Bluetooth® / Source Button: This button is used for initiating Bluetooth pairing and for cycling through available audio input sources (USB Audio, Bluetooth, AUX-in).
- c) RGB Control Button: This button allows users to manage the speaker's RGB lighting effects.
Bluetooth Pairing and Source Switching
?Bluetooth Pairing (i): To connect wirelessly, press and hold the Bluetooth/Source button (b) for 2 seconds. On your mobile device, select "Pebble Pro" from the list of available Bluetooth devices. The LED indicator will blink blue upon successful pairing.
?Source Switching (ii): Press the Bluetooth/Source button (b) once to switch between audio sources. The available options are USB Audio, Bluetooth, and AUX-in.
Note: When first connected to a computer, the Creative Pebble Pro will default to USB Audio mode. If the power source does not support USB audio, the speakers will enter Bluetooth pairing mode by default upon initial connection.
RGB Lighting Control
?RGB Control (c):
- Press the RGB Control button (c) once to cycle through lighting modes: Cycle, Pulse, Solid Color, and Off.
- Press and hold the button for 2 seconds to enter color selection mode, allowing you to adjust the RGB ring color to your preference.
- Press and hold for another 2 seconds to exit color selection mode.
LED Indicator Status (d)
| Operation | LED Indicator |
|---|---|
| USB Audio | Solid Purple |
| Bluetooth Pairing | Blinking Blue |
| Bluetooth Connected | Solid Blue |
| AUX-in | Solid Green |
| RGB Lighting Mode | Pulsing White |
Volume Control and Power
?Volume Control (e): The volume knob on the 'R' speaker allows you to adjust the audio level. Turn clockwise to increase volume and counter-clockwise to decrease it.
⚡Power ON/OFF: Press and hold the volume knob for 2 seconds to turn the speakers ON or OFF.
?Factory Reset: Press and hold the volume knob for 10 seconds to perform a factory reset.
Ports and Connections
- f) RGB Ring: The illuminated ring surrounding the speaker driver, providing ambient lighting.
- g) Headphone Output: A 3.5mm 4-pole port for connecting headphones.
- h) Microphone Input: A 3.5mm 3-pole port for connecting an external microphone.
- i) Passive Radiators: Located on the rear of the speakers, these enhance bass response.
- j) AUX-in Port: A 3.5mm analog audio input for connecting external audio sources.
- k) USB-C Port: Used for both audio signal transmission and power supply.
- l) USB-C PD Port: Dedicated port for power delivery only.
Side and Rear Views
The side view illustrates the sleek, angled design of the speakers. The rear view highlights the connectivity ports, including the USB-C and USB-C PD ports, and the passive radiators.
Connection Guide
The Creative Pebble Pro offers versatile connection options:
- Bluetooth Connection: Connect wirelessly to your smartphone, tablet, or computer via Bluetooth 5.3. Refer to the Overview section for pairing instructions.
- 3.5mm Headphone Output (ii): Connect your headphones to the dedicated 3.5mm 4-pole output port (g) on the 'R' speaker for private listening.
- 3.5mm Microphone Input (iii): Connect an external microphone to the 3.5mm 3-pole input port (h) on the 'R' speaker for voice input.
- AUX-in Connection (iv): Use a 3.5mm audio cable to connect analog audio sources (e.g., MP3 players, older audio devices) to the AUX-in port (j).
- USB Audio Connection (v): Connect the speakers to your computer using the provided USB-C cable plugged into the USB-C port (k). This enables both audio playback and powers the speakers.
- USB-C PD Adapter (vi): For enhanced power delivery, a USB-C PD adapter (sold separately) can be connected to the USB-C PD port (l). Note: This port provides power only and does not transmit audio.
Main Reset Procedure
✊Perform a Main Reset: To restore the Creative Pebble Pro to its factory default settings, press and hold the Bluetooth button (b) for 8 seconds. This action will clear all previously paired Bluetooth devices.
Other Information
For the complete user guide, safety, and regulatory information, including ErP details, please visit:
creative.com/compliance/PebblePro
For additional product support, please visit:
Technical Specifications
| Specification | Details |
|---|---|
| Speaker Power |
|
| Total System Power |
|
| Drivers | 2.25" full-range with integrated passive radiators |
| Connectivity | USB Audio, Bluetooth, 3.5 mm AUX-in |
| Wireless Technology | Bluetooth 5.3 |
| Supported Bluetooth Profiles |
|
| Operating Frequency | 2402-2480 MHz |
| Operating Range | Up to 10m / 33 ft, measured in open space. Walls and structures may affect device range. |
| Supported Codec | SBC |
| Signal-to-Noise Ratio | ≥ 75 dB |
| Frequency Response | 80-20,000 Hz |
| Input |
|
| Maximum RF Output Power | 8 dBm |
| Maximum Operating Temperature | 45°C |
| Power Output Note |
Up to 10W RMS when connected to a 10W USB-C / USB-C PD adapter. Up to 30W RMS when connected to a 30W USB-C PD adapter (15V 2A). |
| Compliance Markings | Located on the bottom of the product. |
