Heinner Meat Grinder MG-W1200R

Introduction

Before using the appliance, please read this instruction manual carefully and keep it for future reference. This manual provides all required instructions related to the installation, use, and maintenance of the appliance. For correct and safe operation, read this manual carefully before installation and usage. To avoid rust, we advise lubricating the cutter unit and grinding discs with vegetable oil.

Package Contents

• Meat grinder
• User manual
• Warranty card

Product Overview and Components

The Heinner MG-W1200R is a versatile meat grinder with a power of 1360W, designed for household use. It comes in white.

Key Components:

• 1. ON/OFF/Reverse switch
• 2. Body
• 3. Fasten button
• 4. Tube inlet
• 5. Food pusher
• 6. Hopper plate
• 7. Head Tube
• 8. Snake (worm shaft)
• 9. Cutting blade
• 10. Cutting plate (fine)
• 11. Cutting plate (medium)
• 12. Cutting plate (coarse)
• 13. Fixing ring
• 14. Sausage attachment
• 15. Kibbe attachment
• 16. Tomato juicer attachment

Safety Instructions and Precautions

• Read instructions carefully before use.
• Ensure the voltage matches your local mains voltage.
• Do not use if the power cord, plug, or other parts are damaged.
• Keep the appliance and its cord out of reach of children.
• Children aged 8 and above can use the appliance under supervision.
• Do not immerse the motor unit in water or rinse it under the tap; use a damp cloth for cleaning.
• Never attempt to grind bones, nuts, or other hard items.
• Do not use your finger or any object to push ingredients down the feed tube; always use the pusher.
• Do not operate the appliance for more than 5 minutes consecutively; allow it to cool for 10 minutes before reuse.
• If the appliance locks, press the Reversal button (REV).
• Dispose of electrical and electronic devices responsibly according to local regulations.
• Never connect the appliance to a time switch.

Assembly and Usage Instructions

Assembling the Meat Grinder:

1. Press the fasten button, hold the head, and insert it into the inlet, then turn it counter-clockwise until fastened.
2. Place the snake into the head, long end first, and turn it until set into the motor housing.
3. Place the cutting blade onto the snake shaft with the blade facing front.
4. Place the desired cutting plate next to the blade, aligning protrusions with slots.
5. Support the cutting plate and screw the fixing ring tight.
6. Place the hopper plate on the head and fix it.
7. Place the unit on a firm surface, ensuring air passages are clear.

Using the Meat Grinder:

1. Ensure the meat is cut into suitable pieces (approx. 20mm x 20mm x 60mm), free of bones, gristle, and sinews. Never use frozen meat.
2. Place meat in the tray and use the pusher to gently feed it into the cutter housing.
3. For steak tartare, mince the meat twice with the medium grinding disc.

Making Sausages:

1. Assemble the meat grinder with the sausage attachment.
2. Mince the meat as described above.
3. Soak the sausage casing in lukewarm water for 10 minutes.
4. Slide the wet casing onto the sausage horn.
5. Feed the minced meat into the grinder; if the casing gets stuck, wet it slightly.

Making Kibbe:

1. Assemble the meat grinder with the kibbe attachment.
2. Feed the kibbe mixture through the attachment.
3. Cut the resulting hollow cylinder into desired lengths.

Using as a Tomato Juicer:

1. Assemble the tomato juicer attachment by inserting the plastic screw locking ring into the sleeve, followed by the gauze, and then the fixing ring.
2. Insert the snake into the head and align it with the screw.
3. Put the sleeve with the fixing ring through the screw and tighten the ring.
4. Place the plastic juice tray and the plastic cover.

Cleaning and Maintenance

• Before cleaning, switch off the appliance and unplug it.
• Press the release button and turn the cutter housing to detach it. Remove the pusher and tray.
• Unscrew the fixing ring and remove all parts. Do not use a dishwasher for cleaning parts.
• Wash all parts that contacted meat in hot soapy water immediately after use.
• Rinse with clean hot water and dry immediately.
• Lubricate the cutter unit and grinding discs with vegetable oil to prevent rust.

Technical Specifications

• Power: 1360W
• Voltage: 220-240V, 50/60Hz
• Noise level: 85dB
• Color: White

Environmental Disposal

Help protect the environment by returning non-working electrical equipment to designated waste disposal centers. This product complies with EU WEEE Directive (2012/19/EU) and is marked with the WEEE symbol, indicating separate collection is required.

Brand and Legal Information

HEINNER is a registered trademark of Network One Distribution SRL. Other brands and product names are trademarks of their respective holders. No part of these specifications may be reproduced without prior consent from NETWORK ONE DISTRIBUTION. Copyright © 2013 Network One Distribution. All rights reserved. This product is designed and manufactured in conformity with European Community norms and standards.

Importer: Network One Distribution, Str. Marcel Iancu, nr. 3-5, București, România. Tel: +40 21 211 18 56.