Your Solution for Reliable Fire Communication
As a security company or installer, you understand the critical importance of fire communication. Don't compromise on reliability and performance. FireCom, the ultimate fire communicator, ensures seamless and secure fire reporting to monitoring centers. With its cutting-edge features and robust design, FireCom is the trusted choice for security professionals who demand the best. Secure your world with FireCom today.
Key Features
Support for CID and SIA DC09 Reporting
FireCom provides flexible reporting options, allowing you to choose the method that best fits your monitoring center requirements.
Compact Design with Multiple Enclosure Options
FireCom comes in a small plastic enclosure for easy integration into fire panels, as well as medium plastic or metal enclosure options with additional power supply, battery, and expansion card for added versatility.
Wide Power Input Range and Backup Battery Charger
FireCom can be powered from 24V fire panels or external power supply (15-32V DC) and includes a backup battery charger for uninterrupted operation.
LTE or LTE-M Connectivity with 2 SIM Card Holders
FireCom offers reliable and secure connectivity options with LTE or LTE-M, and the convenience of 2 SIM card holders for easy setup.
Onboard Temperature Sensor and Watchdog Timer
FireCom features built-in temperature sensing and watchdog timer for enhanced performance and reliability.
Expandable Input/Output Options
The FireCom system can be easily expanded by adding extra modules that connect to RS485, allowing for additional inputs (zones). This flexibility caters to various installation requirements.
Indication and Control
FireCom includes an onboard buzzer, LED indicators for system status, a connector for an LCD board for advanced status indication, and reset and silence buttons.
Messaging Capabilities
Messages to the Security Company
- Sends events via the built-in LAN module or cellular 4G modem.
- Events are sent via available communication channels with the selected priority.
- Any CMS can receive reports, provided they have TRIKDIS software/IP receiver or any other manufacturer's IP receiver supporting SIA DC-09 IP protocol.
- Prioritizes transmission of events to the CMS: messages are first transmitted to the CMS and then to Protegus 2.
- Possibility to send event reports to CMS of two different security companies.
- Event messages are sent in Contact ID or SIA codes.
Messages to Users
- Calls selected phone numbers (up to 8 users).
- Sends SMS messages about events.
- Provides push and special sound event notifications using the Protegus 2 application.
- Supports remote temperature monitoring.
Remote Control and Settings
Remote Control of Outputs
- Via Protegus 2 app.
- By calling the device's phone number.
- Via SMS messages.
Settings and Installation
- Quick and easy installation.
- Device configuration via USB cable or remotely using TrikdisConfig software.
- Supports remote firmware updating.
- Provides two access levels (installer and administrator) for setting parameters.
Inputs and Outputs
- 3 relay outputs (1 A, 30V DC).
- Input "FLOOP" is intended for connection of two-wire fire detectors.
- 10 I/O terminals, configurable as input (IN) or output (OUT).
- Selectable Input (IN) types: NC, NO, EOL, EOL-T, ATZ, ATZ-T. Resistors of different ratings can be used in EOL and ATZ circuits.
- With iO expander modules, IN inputs can be expanded up to 32 units, and OUT outputs up to 16 units.
- RS485 bus is used to connect iO series expander modules.
Technical Specifications
| Parameter | Description |
|---|---|
| LTE modem frequencies | EU (Europe): LTE-FDD: B1/B3/B5/B7/B8/B20/B28 LA (Latin America): LTE-FDD: B2/B3/B4/B5/B7/B8/B28/B66 |
| Power supply voltage | 15-32 V DC, 2.5A |
| Current consumption | Up to 50 mA (stand-by). Up to 300 mA (transmitting). Up to 2.5 A (after connecting the maximum possible load with external devices). |
| Backup power source [BAT] | 12 V lead-acid battery, 4 Ah/7 Ah |
| Battery charge current | Up to 500 mA |
| Power voltage and current for external devices [AUX] | 12 V DC, up to 1 A |
| Transmission protocol | TRK, SIA DC-09_2007, SIA DC-09_2012, SIA DC-09_IPcom, TL150 |
| Encryption key | 6 symbol encryption key. |
| Connection to CMS | TCP/IP or UDP/IP |
| Event codes | Contact ID, SIA codes. |
| LAN module | Yes, built-in |
| LAN network configuration type | DHCP or manual |
| SIM card | 2, NANO size |
| Report transmission directions | - To main and backup receivers of 2 different security companies; - To Protegus 2 cloud, to iOS/Android Protegus 2 mobile apps; - To 8 mobile phones via SMS messages. - Calls 8 mobile phones. |
| Event reporting transmission channels | 4G, Ethernet (LAN), SMS, call |
| Message encryption | Yes |
| Internal clock | Yes |
| User | 40 |
| Dual purpose terminals [I/O] | 10; IN or OUT function selected during programming. When IN is selected, available types: NC, NO, EOL, EOL-T, ATZ, ATZ-T. When OUT is selected, the terminal becomes open collector (OC) type with up to 100 mA current. |
| No. of groups | 8 |
| No. of zones | 10 (20 zones if using ATZ), (can be expanded to 32 zones using expanders) |
| No. of PGM outputs | 3 relay (1 A, 30V DC). (can be 13 if IO terminals are set as outputs. Can be expanded to 16 outputs with expanders) |
| Buffer memory capacity | 60 events |
| Events log memory | Up to 1000 events. Oldest entries deleted automatically. |
| Configuration | Remotely using TrikdisConfig software or locally using USB Type-C. Remotely using SMS messages. |
| 1-Wire data bus length [1 WIRE] | Up to 30 m |
| Compatible temperature sensors | Maxim®/Dallas® DS18S20, DS18B20; AM2301 series |
| Max. number of temperature sensors connected to 1-Wire data bus | 8 (Dallas) or 1 (if an AM2301 series sensor is used) |
| RS485 bus | 2 |
| RS485 bus length | Up to 100 m |
| Supported modules | iO-8 expander module; iO-MO iO-WL radio wave transceiver; iO-LORA expander module; iO8-LORA expander module; PB-LORA panic button; REL-LORA expander module. |
| Operating environment | Temperature from -10 C to +50 C, relative air humidity up to 80% at +20 C. |
| Dimensions | 139 x 78 x 20 mm |
| Weight | 1.19 kg |
Image Description: A close-up view of the FireCom printed circuit board (PCB). Key components and connectors are visible, including status LEDs (POWER, DATA, TROUBLE), LAN port, RS485 interface, and various terminal blocks for inputs/outputs.
