Panduit | Network Infrastructure and Industrial Electrical Wiring
Instruction Manual for PANDUIT models including: R2P48, R2P, R2PS, R2PW, R2P96, R2PWH, R2P48 Cable Management Numbers Up Style Racks, R2P48, Cable Management Numbers Up Style Racks, Management Numbers Up Style Racks, Numbers Up Style Racks, Up Style Racks, Style Racks, Racks
PAN R2P 2-Post Rack, 45RU, #12-24 T | Cooper Electric
Panduit | R2PS
PAN R2PW 2-Post Rack, 45RU, #12-24 | Energy Avenue
File Info : application/pdf, 1 Pages, 276.89KB
DocumentDocument© Panduit Corp. 2023 Cable Management Numbers-Up Style Racks Part Number(s): R2P48, R2P, R2PS, R2PW, R2P96, R2PWH INSTALLATION INSTRUCTIONS V00028HA_REV03 3/8" Nut 3-8X1" Bolt 3/8" Paint Piercing Washer RACK ASSEMBLY Apply Antioxidant Paste to painted surfaces that the 3/8 paint piercing washers will come in contact with. Install top angles to upright channels using (2) 3/8x1" bolts (2) 3/8" nuts and (4) 3/8" paint piercing washer (see figure below) per angle. Finger tighten only. Apply Antioxidant Paste to painted surfaces that the 3/8 paint piercing washers will come in contact with.Install the base angles to the vertical upright channels using (4) 3/8x1" bolts (4) 3/8" nuts and (8) 3-16 paint piercing washers (see figure below) per angle. Finger tighten only. A B Square the rack by measuring the distance from A to D, and B to C shown.. The difference in distance from A to D, and B to C should be no greater than 1/8". Completely tighten all bolts to at least 14 ft.-lbs (19.0 N-m). Mounting Configuration Top Angle Antioxidant Paste 3/8X1" Bolt 3/8 Paint Piercing Washer 3/8 Nut Rack Channel C D MOUNT RACK TO FLOOR Securely mount the rack to the floor using the appropriate hardware based on the floor construction (concrete, raised floor, or wood). Note: Mounting using the holes closest to the rack will minimize deflection. 15.0 Note: The maximum weight load of the 6.0 rack is 1,000 pounds with the exception of the R2P48, which is 300 lbs. The weight should be evenly distributed across the height of the rack, with the heaviest components mounted at the bottom of the rack. The top angles are not intended to support a significant load. 16.0" = 19" RACK 20.0" = 23" RACK 6.5 9.5 12.5 20.3" = 19" RACK 24.3" = 23" RACK 1.25" TYP Concrete floor = RFAKIT Raised floor = RFA3KIT (Sold Separately) For Instructions in Local Languages and Technical Support: www.panduit.com www.panduit.com Page 1 of 1 E-mail: techsupport@panduit.com Phone: 866-405-6654