Spigen SteadiBoost Flex Wireless Charger

Key Features

• Qi Certified
• Intelligent Power Technology
• ControlHeat™ Technology (Overheat Protection)
• ControlLight™ Technology
• ControlSlip™ Technology
• Smart IC Chip Protection

The SteadiBoost Flex Wireless Charger offers a convenient way to charge your smartphone wirelessly, supporting both vertical and horizontal positioning.

Connecting to the Power Adapter

1. Plug the USB power adapter into a power outlet.
2. Connect the USB cable to the USB power adapter and the wireless charger.
3. The charger enters standby mode after the LED indicator flashes blue and red once.

Diagram Description: An illustration shows a USB power adapter, a USB cable, and the wireless charger. The USB power adapter is plugged into a wall socket. The USB cable connects the adapter to the wireless charger via its USB Type-C port.

Charging Mode

The blue LED indicator light will automatically turn off after 60 seconds of initial charging. If you detach a smartphone from the charging pad, the blue LED will turn off and the charger will go into standby mode.

Diagram Description: Illustrations show a smartphone being placed vertically and horizontally on the wireless charger. Another illustration shows the blue LED indicator light on the charger.

LED Indicator Display

Note: ControlLight™ Technology will turn off the LED after 60 seconds of initial charging for comfortable sleep.

Troubleshooting Abnormalities:

• When an abnormality is detected: Adjust the position of the smartphone.
• When foreign material (metal) is detected: Check for any foreign material (metal) stuck between the smartphone and the wireless charging pad.

Cautions

1. Do not exert excess force on the product.
2. Do not disassemble the product or let it come into direct contact with heat or water.
3. Be careful when using the product in a hot or humid environment as it may damage the circuit.
4. Do not place magnetic chip cards (e.g., ID cards, credit cards) near the product, as a magnet may cause the product to break or malfunction.
5. Keep medical devices (e.g., pulse measuring devices, hearing aids) at least 20cm away from the product, as they may indirectly interfere with the product.
6. Keep away from children.

The product image herein is provided as an example and user's guide and may differ from the actual product.

For smartphones that do not support wireless charging, a separate wireless charging patch or wireless charging case is required.

Note

B Class Equipment (Equipment for home use). This product is mainly for home use with radio wave acceptability registration; therefore, it can be used in all areas.

Product Specifications

• Input: 5V=3A, 9V=2A, 12V=1.5A
• Output: 5W/7.5W/10W/15W
• Dimensions: 5.64 x 2.76 x 0.69in (143.2 x 70.2 x 17.4mm)
• Weight: 4.59oz (130g)
• AC/DC Adapter of EU/UK:
• Charging Efficiency: ≥ 72%
• Model: (EU)TYOU01QCE / (UK)TY0U01QCG
• Input: AC 100-240V~50/60Hz 0.8A
• Output: DC 3.6V-6.5V=3A; DC 6.5V-9V=2A; DC9V-12V=1.5A
• The Cable USB: 120mm Type-C
• Frequency:
• Operation Frequency: 112.115-128.077 kHz (Declaration for EU)
• Max. RF power transmitted: -0.67dBµA/m @10m (Declaration for EU)
• DOC: SPIGEN KOREA CO., LTD declares that the radio equipment type [F316W] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: www.spigen.com

FCC Part 15 Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the product.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISED Regulatory Compliance

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.

L'émetteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1. L'appareil ne doit pas produire de brouillage; 2. L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé. Cet émetteur ne doit pas être situé ou fonctionner conjointement avec une autre antenne ou un autre émetteur. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.

Connecter à l'adaptateur d'alimentation (FR)

Diagram Description: Similar to the English section, this shows a USB power adapter, USB cable, and the wireless charger. The French text provides the same instructions.

1. Brancher l'adaptateur d'alimentation USB à la prise de courant.
2. Connecter le câble USB entre l'adaptateur d'alimentation USB et le chargeur rapide sans fil.
3. Le chargeur se met en mode veille après que le voyant LED clignote une fois en bleu et une fois en rouge.