Instruction Manual for SPEAKMAN models including: S-6000, S-6000-E2, S-6000-E175, S-6000 Series Multi Function 5 Plunger Polished Chrome Shower, S-6000 Series, Multi Function 5 Plunger Polished Chrome Shower, Function 5 Plunger Polished Chrome Shower, Plunger Polished Chrome Shower, Polished Chrome Shower, Chrome Shower, Shower
Speakman Vector 2.5 GPM Multi-Function 5-Plunger Polished Chrome Showe – US Bath Store
File Info : application/pdf, 1 Pages, 1.25MB
DocumentDocumentINSTRUCTIONS FOR MODELS S-6000 S-6000-E2 S-6000-E175 TOOLS AND SUPPLIES Thread Seal Tape (included) Adjustable Wrench 1 Apply Thread Seal Tape to the outlet side of shower arm in a clockwise direction. ROUGH IN DIMENSIONS For additional assistance or service please contact: SPEAKMAN® Company 400 Anchor Mill Road New Castle, DE 19720 800-537-2107 customerservice@speakman.com www.speakman.com 92-S-6000-01 IMPORTANT Be sure to read instructions thoroughly before beginning installation. Do not overtighten any connections or damage may occur. This showerhead has an operating range of 20-80 psi. SAFETY TIPS Cover your drain to prevent loss of parts. MAINTENANCE Periodic cleaning using a mild soap and warm water will help keep your Showerhead's appearance in its original condition. For best results, dry immediately with a soft, clean cloth. DO NOT USE harsh and/or abrasive cleaners. To help restore the finish, occasionally apply a non-abrasive wax to your showerhead body (follow manufacturers' instructions). On CHROME PLATED SHOWER HEADS, a two (2) part white vinegar, one (1) part water solution can be used to break down excessive mineral deposits on the sprays. Let the showerhead soak in the solution for about ½ hour then rinse thoroughly. Brush off any remaining mineral deposits if necessary. DO NOT USE the vinegar/water treatment on any finish other than Chrome. To reduce mineral build-up, turn the handle to RAIN position to let the water drain out after every use. WARRANTY Warranty information can be found at: www.speakman.com 2 Thread Shower head onto shower arm by turning it in a clockwise direction. Tighten with adjustable wrench. Turn water supply on and check for leaks. 51" 4 133m m 1/ 2"-14 NPT THREA DED INLET 35" 8 92m m 41" 8 104m m 3 Rotate Spray Face to change Spray Settings. Model: S-6000 Max. Flow Rate: 2.5 gpm (9.5L/min) Min. Flow Rate: 2.0 gpm (7.6 L/min) @ 45psi FOR USE WITH AUTOMATIC COMPENSATING VALVES RATED AT 7.6 L/MIN (2.0 GPM) OR LESS. Model: S-6000-E2 Max. Flow Rate: 2.0 gpm (7.6 L/min) Min. Flow Rate: 1.75 gpm (6.6 L/min) @ 45 psi FOR USE WITH AUTOMATIC COMPENSATING VALVES RATED AT 6.6 L/MIN (1.75 GPM) OR LESS. Model: S-6000-E175 Max. Flow Rate: 1.75 gpm (6.6 L/min) Min. Flow Rate: 1.50 gpm (5.7 L/min) @ 45 psi FOR USE WITH AUTOMATIC COMPENSATING VALVES RATED AT 5.7 L/MIN (1.50 GPM) OR LESS. Specifications: Inlet: 1/2" NPT FEMALE