User Guide for ADS models including: 031-0326 Chemical Alarm Kit, 031-0326, Chemical Alarm Kit, Alarm Kit, Kit

KIT, 031-0326 ADS Chemical Alarm

[PDF] KIT, 031-0326 ADS Chemical Alarm - American Dish Service

Turn the screw counter clockwise to decrease the sensitivity of the switch (turning ... of the detergent switch of the cam timer. 2 Connect the other end of the ...

PARTS KIT, 031 0326 ADS Chemical Alarm

High Capacity Dishwashing Machine | American Dish Service


File Info : application/pdf, 4 Pages, 1.13MB

PDF preview unavailable. Download the PDF instead.

PARTS-KIT-031-0326-ADS-Chemical-Alarm
American Dish

Service

Manufacturers of Ware Washing Equipment

TECHNICAL SUPPORT MATERIAL
Installation of ADS Chemical Alarm 031-0326 Kit

Low Level Alarm Installation Instructions
Always wear approved personal protective equipment when working on chemical lines and pumps.
1 Using the provided template, mark the holes and drill. The center hole is 3/8" and the two small holes are 1/8". NOTE: Mount the vacuum switch above the chemical lines to prevent back flow of chemicals into the switch (See drawing below).
2 Bolt the switch to the control box
3 Drill a 3/16" hole and mount the buzzer.
4 Connect the long rubber hose to the vacuum switch and the middle leg of the plastic tee.
5 Connect the two short rubber hoses to the other two legs of the tee.
6 Locate the 1/4" chemical pick up line for the sanitizer pump and cut it so that the plastic tee can be put in-line.
7 Use cable ties to secure all of the ends of the rubber hose.
8 Wire the low level alarm using the wiring instructions.
NOTE: The sensitivity of the chemical alarm switch (091-3080) is adjustable. To adjust the switch, remove the tubing from the barb end of the switch. The adjustment screw is located inside the barb port of the switch and is adjusted with a 5/64 Allen wrench. Turn the screw counter clockwise to decrease the sensitivity of the switch (turning excessively will damage switch). Make sure the chemical buckets are placed on the floor next to the machine.

American Dish Service | 913.422.3700 | 800.922.2178 | Fax: 913.422.6630 | orders@americandish.com

Low Level Alarm Wiring Instructions
1 Connect the green kit wire (piggyback end) to the green wire on the cam timer sanitizer switch, bottom terminal. For a detergent alarm the same wire order should be followed only attached to the bottom terminal of the detergent switch of the cam timer.
2 Connect the other end of the kit green wire to the (common) terminal (top) of the vacuum switch (091-3080). 3 Connect one end of the black kit wire to the middle terminal on the vacuum switch (NC). 4 Connect the other end of the black kit wire to one of the terminals on the buzzer (037-2103). 5 Connect the spade connector end of the white kit wire to the remaining terminal on the buzzer. 6 Connect the ring terminal end of the white kit wire to the white neutral terminal on the motor contactor in the
control box. (See photos below)

Wire connection to the vacuum switch

Wire connections to the cam timer sanitizer

2

American Dish Service | 913.422.3700 | Toll-Free: 800.922.2178 | Fax: 913.422.6630 | orders@americandish.com

Two wires to the buzzer, mounted in this manner

Connect buzzer white wire to the mtr contactor neutral

Low Level Alarm Kit Bill of Materials-031-0326

QTY

Part No. Description

1

091-3080 Vacuum Switch

1

092-1137

Fitting, Tee, 1/4" Hose Barb (plastic)

1

087-6700 Squeeze Tube

1

091-5110

Wire, Green 18 GA x 12"

1

091-5108 Wire, White 18 GA x 12"

1

091-5109 Wire, Black 18 GA x 12"

4 091-5202 Terminal, .187 Female Spade

1

091-5210 Terminal, Ring Connector

1

091-5204 Terminal, .187 Piggyback Spade

7

091-5220 Cable Tie, Small

2

098-1213

Screw, #3 x 3/4" Lg SS

2

098-2002 Nut, #3 SS

1

037-2103 Buzzer

1

098-1102 Screw, 6-32 x 1/4" RH SS

1

098-1104 Screw, 6-32 x 1/2" RH SS

Wire Descriptions
Green wire 18 gauge 12" long, 091-5204 .187 piggyback terminal on one end; 091-5202 .187 female spade terminal on the other end.
White wire 18 gauge 12" long, 091-5202 .187 female spade terminal on one end; 091-5210 ring terminal on the other end.
Black wire 18 gauge 12" long, 091-5202 .187 female spade terminal on both ends.

Installation of ADS Chemical Alarm 031-0326 Kit for 2019 | Technical Support Material | americandish.com

3

American Dish Service
Manufacturer of low and high temperature Commercial Dishwashers and Glasswashers
900 Blake Street | Edwardsville, Kansas 66111 Phone: 913.422.3700 | Toll-Free: 800.922.2178 | Fax: 913.422.6630
orders@americandish.com | americandish.com

American Dish

Service

Manufacturers of Ware Washing Equipment

Installation of ADS Chemical Alarm 031-0326 Kit for 2019 | Technical Support Material | americandish.com



References

Adobe PDF Library 17.0 Adobe InDesign 19.3 (Macintosh)