App Installation
To install the CARGO CONTAINER app, scan the QR codes provided below or search for 'CARGO CONTAINER' on the Google Play Store or Apple App Store.
QR code for Google Play Store
QR code for Apple App Store
After installation, search for 'CARGO CONTAINER' in the respective app store's search bar.
Language Setting
From the app's home screen, tap the list button (☰) in the top right corner to access the settings menu.
Select 'LANGUAGE' from the settings menu.
Choose your desired language from the list of supported languages, which includes English, Korean (한국어), Japanese (日本語), Traditional Chinese (繁体中文), and Simplified Chinese (简体中文).
Bluetooth Pairing
Press the power button three times: press it twice quickly, then press and hold it for three seconds.
When the power button starts blinking, open the application and follow the on-screen instructions to register the device.
Device diagram description: A button is shown with a 3-second indicator (3s) next to it, signifying the press-and-hold action.
Add New Product
On the app's home screen, tap the 'ADD PRODUCT' button to register a new product.
App screen description 1: The app home screen displays a message 'There is no available device' and an 'Add Product' button.
App screen description 2: After a successful device search, the app displays a list of available products for registration. Select the desired product to connect.
App screen description 3: The app shows the selected product 'CC. SAFE CO-DETECTOR' with options like 'NAME', 'Pairing', and 'Search again'.
Main Control Screen
Once the device is successfully connected, you will be taken to the main control screen where you can manage the device.
Registered Product and Carbon Monoxide Concentration Display
This section displays the paired product name ('CC. SAFE CO-DETECTOR') and the current Carbon Monoxide (CO) concentration in ppm (e.g., '0001 C0ppm').
Carbon Monoxide Sensitivity Adjustment
Tap the 'CO-LEVEL SETTING' button to adjust the Carbon Monoxide sensitivity. This setting determines the detection start point for the 2nd level.
Sound Test
Tap the 'SOUND TEST' button to verify that the alarm sound functions correctly.
Temperature and Humidity Display
Displays the current environmental temperature (e.g., '$10.5℃') and humidity (e.g., '20%').
Brightness Adjustment
Tap the 'BRIGHTNESS' options (LOW, MEDIUM, HIGH) to set the screen brightness.
Battery Level Display
Shows the current battery status (e.g., '38%').
App screen description: The main control screen interface displays the CO detector status, current CO concentration, temperature, humidity, brightness settings, and battery level.
Carbon Monoxide Sensitivity Adjustment Details
To adjust sensitivity, touch the relevant button. Drag the point to set the Carbon Monoxide sensitivity level, which serves as the detection endpoint for the 1st level. Once this value is set, the 2nd level setting will automatically configure from that value up to 99PPM.
App screen description: The Carbon Monoxide Sensitivity Adjustment screen shows a slider with defined levels: green (0-49), yellow (50-99), and red (100+). A 'Confirm' button is present to finalize the setting.
Rename Product
To rename a product within the registered product list, long-press the product you wish to rename.
On the subsequent screen, select 'RENAME' to proceed to the renaming interface.
In the renaming screen, enter the desired product name and press 'SAVE' to update the registered name.
App screen description sequence: Shows the process of long-pressing a product in the list, selecting the 'Rename' option from a pop-up menu, and then entering a new name before saving.
Delete Device
To delete a device from the registered product list, long-press the product you wish to delete.
App screen description 1: Shows the product list with a long-press action initiated on a device.
App screen description 2: A pop-up menu appears after long-pressing, offering options like 'Rename' and 'Remove device'. Select 'Remove device'.
App screen description 3: After deletion, the app returns to the home screen, displaying the 'Add Product' button, indicating the possibility to re-register the device.
If you wish to re-register the product after deletion, press the 'ADD PRODUCT' button on the app's home screen.
FCC Compliance Information
FCC Warning Statement: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.