VTech CS2050/CS2051/CS2052/CS2053 Quick Start Guide

Support Information

Scan the QR code or visit euphones.vtech.com/support for support information.

[QR code linking to VTech support website]

Important Safety Instructions

• Read and understand all instructions.
• Follow all warnings and instructions marked on the product.
• Unplug before cleaning; use a damp cloth.
• Do not use near water.
• Avoid direct sunlight or extreme cold; keep away from heat sources.
• Do not overload outlets or extension cords.
• Refer servicing to VTech/distributor if cord/plug is damaged, product doesn't operate normally, cabinet is damaged, or performance changes.
• Avoid using during electrical storms.
• Do not use to report a gas leak.
• Use only supplied NiMH batteries.
• Other battery types may be dangerous and cause damage. Manufacturer not liable for non-compliance.
• Do not use third-party charging bays.
• Note correct polarity when inserting batteries.
• Batteries should not be exposed to excessive heat or immersed in water.
• Use only specified VTech adaptors and batteries.

Disposal of Old Equipment and Batteries (WEEE)

For European Union and countries with recycling systems:

Symbols ([WEEE symbol for electrical and electronic equipment] and [Battery disposal symbol]) on products, packaging, or documents mean used electrical/electronic products and batteries must not be mixed with general household waste. Take them to applicable collection points for proper treatment, recovery, and recycling according to national legislation.

Correct disposal helps save resources and prevent negative environmental/health effects. Contact your local municipality for more information. Penalties may apply for incorrect disposal.

For business users: Contact your dealer or supplier for disposal information.

For countries outside the EU: Symbols are valid only in the EU. Contact local authorities or dealer for correct disposal methods.

[Battery symbol with chemical indicator note: The battery symbol may be used with a chemical symbol, indicating compliance with directives for the chemical involved.]

Recycle your device (WEEE directive 2012/19/EU): The WEEE logo indicates this product must not be disposed of with household waste. Dispose of electronic/electrical waste at specified collection points for recycling.

Approval and Conformity

This product is intended for use within Europe and the UK. It complies with the essential requirements of the EU's Radio Equipment Directive (2014/53/EU) and the UK's Radio Regulations 2017.

Vtech Telecommunication Ltd. declares this telephone (CS2050/CS2051/CS2052/CS2053) complies with essential requirements of EU's Radio Equipment Directive (2014/53/EU) and UK's Radio Equipment Regulations 2017.

The declaration of conformity can be viewed at https://www.vtech.com/rtte-directive.

[CE mark] confirms conformity with the directive.

[UKCA mark] confirms conformity with UK regulations.

Importer: VTech Electronics Europe Plc, Napier Court, Abingdon Science Park, Abingdon, Oxon, OX14 3YT.

Manufacturer: VTech Telecommunications Ltd., 23/F, Tai Ping Industrial Centre, Block 1, 57 Ting Kok Road, Tai Po, Hong Kong.

Technical Specifications

Frequency: 1.88 GHz to 1.9GHz

Channels: 10

RF Power: <250mW

Handset Battery: CORUN Ni-MH AAA 400mAh 2.4VDC

Base/Charger Power Requirements:

• EU Plug: Input 100-240V AC 50/60Hz 0.15A, Output 6VDC 0.45A 2.7W (Models: VT05EEU06045, A318-060045W-EU1)
• UK Plug: Input 100-240V AC 50/60Hz 0.15A, Output 6VDC 0.45A 2.7W (Models: VT05EUK06045, A318-060045W-UK1)

Customer Service and Product Warranty

IMPORTANT: Retain this guide with your sales receipt as proof of purchase date.

Customer Service

Call 03306780149 (UK) or +44 3306 780149 (outside UK) for assistance.

Product Registration

Register your VTech product at www.vtech.co.uk/clubvtech/login. Join the VTech Club for competitions, news, expert advice, and games.

Product Warranty

This product is covered by a one-year warranty against defects in materials or workmanship from the date of purchase.

Return to place of purchase or VTech Electronics Europe Plc (address below) with proof of purchase for replacement. Without proof, no replacement will be provided.

VTech Electronics Europe Plc will examine and replace defective products at their discretion.

Warranty is void if damaged due to misuse, modification, unauthorized repair, faulty batteries, battery discharge, or incorrect electrical connections.

Warranty is personal and non-transferable. LCD screen breakages are not covered.

When returning products to VTech Electronics Europe Plc, pack carefully to avoid transit damage. Do not include batteries or adaptors. Include fault details, name, address, and contact phone/email.

Register online at www.vtech.co.uk/clubvtech for an online warranty record.

Return Address: VTech Electronics Europe Plc, c/o XPO Logistics, Warehouse 350, Cat & Fiddle Lane, West Hallam, DE7 6HE.

This warranty is an extra benefit and does not affect statutory rights. Valid for UK and Ireland only. For other regions, contact local distributor or place of purchase.

Connect the base / charger

[Diagram description: Step 1: Connect the power adapter to the base. Step 2: Plug the power adapter into the mains socket. Step 3: Connect the charger to the base.]

Install the battery

[Diagram description: Step 1: Open the battery compartment cover on the handset. Step 2: Insert the battery, ensuring correct polarity (+/-). Step 3: Close the battery compartment cover.]

Charge the battery

Place the handset in the telephone base or charger to charge.

[Diagram description: Handset being placed onto the charging base.]

Note: 1 x charger set for CS2051, 2 x charger set for CS2052, 3 x charger set for CS2053.

Settings

Set language

OK → ▲/▼ → HS Settings → OK → ▲ → LANGUAGE → OK → ▲/▼ to select English | Deutsch | Français | Italiano | Español | Nederlands → OK

Set date or time format

OK → ▲/▼ → HS Settings → OK → DATE & TIME → OK

1. OK → Date Format → OK → ▲/▼ to select DD-MM-YY or MM-DD-YY → OK;

OR

2. OK → ▲/▼ → Time Format → OK → ▲/▼ to select 12 HR / 24 HR → OK

Set date & time

OK → ▲/▼ → HS Settings → OK → DATE & TIME → OK → ▲/▼ → Set Date or Set Time → OK → Enter the date → OK → Enter the time → OK

Answering machine

Turn on/off the answering machine

On the handset: OK → ▲/▼ → ANS. MACHINE → OK → ▲/▼ → TAM ON/OFF → OK → ▲/▼ to choose On/Off → OK

On the base: Press [power button] to turn on the answering machine; press again to turn it off.

Record your message

OK → ▲/▼ → ANS. MACHINE → OK → ▲/▼ → TAM SETTINGS → OK → ▲/▼ → OGM SETTINGS → OK → ▲/▼ → RECORD MESS → OK

You will hear a beep tone, and then you can record your message.

Press OK to end the recording.

It will repeat your recorded message.

Ringer - external calls

OK → ▲/▼ → HS Settings → OK → ▲/▼ → Ring Setup → OK → ▲/▼ → Ext, Ring → OK → ▲/▼ to select melody → OK

Ringer - internal calls

OK → ▲/▼ → HS Settings → OK → ▲/▼ → Ring Setup → OK → ▲/▼ → Int, Ring → OK → ▲/▼ to select melody → OK

Ringer - volume

OK → ▲/▼ → HS Settings → OK → ▲/▼ → Ring Setup → OK → ▲/▼ → Ring Volume → OK → ▲/▼ to select volume → OK

To exit, press C/ repeatedly until you return to the main menu.

Play/Stop, Delete, Repeat and Skip message

When there is a message on the answering machine, press these keys on the base to:

Play/Stop: PLAY/STOP, Delete: DELETE, Repeat: REPEAT, Skip: SKIP

To activate the handset controls during message playback, press:

OK → ▲/▼ → ANS. MACHINE → OK → MSG PLAYBACK → OK

Press these handset keys to control messages: Stop, Delete, Repeat, Skip.

Tone - set key tone on/off

OK → ▲/▼ → HS Settings → OK → ▲/▼ → Tone Setup → OK → Key Tone → OK → ▲/▼ to choose On or Off → OK

Tone - set alert tones on/off

OK → ▲/▼ → HS Settings → OK → ▲/▼ → Tone Setup → OK → ▲/▼ to choose Battery Tone or Out of Range → OK → ▲/▼ to choose On or Off → OK

Alarm - set alarm time and activation

OK → ▲/▼ → HS Settings → OK → ▲/▼ → Alarm → OK → ▲/▼ → On → OK → Enter alarm time in 24 hr format → OK → Display SNOOZE → OK → ▲/▼ to select Snooze On or Off → OK

Set the auto answer

OK → ▲/▼ → HS Settings → OK → ▲/▼ → Auto Answer → OK → ▲/▼ to select On or Off → OK

Phonebook

OK → ▲/▼ → Phonebook → OK → All Contacts → OK twice → Add → OK → Name → OK and enter name → OK → Number → OK and enter phone number → OK → Melody 1 → ▲/▼ to select melody → OK

Other controls/indicators on the base

Adjust base volume: ▲/▼

Find handset: FIND

Line in use: [line indicator]

Message number: MESSAGE NUMBER

Nuisance and Unwanted Call Blocker

Add a call block entry

OK → ▲/▼ → Call Blocker → OK → Black List → OK → ADD → OK → NAME → OK and enter name → OK → Number → OK and enter phone number → OK

Block unknown calls

OK → ▲/▼ → Call Blocker → OK → ▲/▼ → Settings → OK → ▲/▼ → Call Type → OK → ▲/▼ → Unavailable → OK → ▲/▼ to select On or Off → OK

Choose from the table below to block different types of calls:

Quick access keys

[Call list icon], [Redial list icon], [Phonebook icon], [Call Blocker icon], [Mute ringer icon], Recall, [Pound/Hash key icon], [Keypad lock icon], [Star key icon], [Space icon].