Wiscent WTB792 Quick Start Guide

1. Power on / off

Illustrates the power button and AC IN port for powering the unit.

2. Install batteries (optional)

Requires 4 UM-2-1.5V batteries (not supplied). Diagrams show battery placement.

3. Overview of the main unit

Details the controls and ports on the main unit:

POWER on/off
VOLUME -
Stop / Repeat
Prev / Fast rewind
Aux in
USB port
Mode/EQ
VOLUME +
Play / Pause / Scan
Next / Fast forward
Headphone jack

4. Source modes

Press the SOURCE button repeatedly to select the desired source: CD, USB, AUX, Bluetooth, or radio. Press and hold the SOURCE button to select the EQ mode (Flat, Classic, Rock, POP, Jazz).

5. Placing a Disc

NOTE: Remove the yellow protective card before playing. Allow 2-3 seconds for the unit to read the disc. Place the disc with the label-side facing up.

6. Adjust volume

Rotate the VOLUME knob clockwise to increase the volume up to level 32. Rotate counter-clockwise to decrease the volume.

7. Radio Mode

Press the [play/pause/scan] button to listen to pre-stored channels. Press and hold the [TUN-/TUN+] buttons for two seconds to automatically tune to the next or previous station.

8. Connect Bluetooth

Instructions show pairing the device with a smartphone via Bluetooth. Look for "WTB-792" in your phone's Bluetooth settings.

9. USB Mode

Supports USB drives up to 128 GB, FAT32 format. Plays MP3/WMA formats. NTFS/exFAT formats are not supported.