FOSSİBOT F7200 Portable Power Station User Manual
Product Introduction
The FOSSİBOT F7200 is a portable power device with a built-in battery pack, offering charge/discharge capabilities. It features AC output, display, interface control, protection, and alarm functions. The unit can be charged via AC mains, solar panels, and vehicle charging. It supports connection with up to two additional battery packs for a maximum capacity of 15666Wh.
Key features include:
- LiFePO4 battery host with an energy capacity of 5222.4Wh, expandable to 15666Wh.
- Pure sine wave AC output suitable for most electronic equipment and small household appliances.
- Bidirectional fast-charging technology for a full recharge in approximately 2.5 hours.
- Multiple output interfaces including USB-A and Type-C PD (Power Delivery) for diverse applications.
- Integrated UPS functionality with sub-10ms switching time for seamless power transition.
- Multi-layer protection mechanisms for operational safety.
Precautions For Use
- Avoid long-term storage and use in environments with high temperature, high humidity, or direct sunlight to prevent battery life reduction and malfunctions. Keep away from fire sources.
- Do not disassemble or modify the product. Improper operation may cause malfunction, fire, or void the warranty.
- Handle the product with care to avoid dropping it.
- Keep out of reach of children and pets to prevent injury or damage.
- Use only original accessories; defects caused by non-original accessories are not guaranteed.
- Plug directly into a wall socket for charging. Avoid extension cords or cable taps to prevent damage or fire hazards. If using an extension socket, do not connect other appliances to it.
- Turn off and unplug the power cable when the product is not in use. For long-term storage, charge to approximately 50% battery level and recharge every 3 months.
- Dispose of or recycle the product according to local laws and regulations.
AC Output Parameter
| Type of AC port | AC output |
|---|---|
| US | 120V 50Hz/60Hz |
| US | 240V 50Hz/60Hz |
| JP | 100V 50Hz/60Hz |
| JP | 200V 50Hz/60Hz |
| CH | 220V 50Hz |
| UK | 220V~240V 50Hz/60Hz |
| EU | 220V~240V 50Hz/60Hz |
| KR | 220V 60Hz |
Button Function Introduction
The FOSSİBOT F7200 features several buttons and ports:
- ① LCD Screen: Displays battery level and usage status.
- ② Power ON/OFF Button: Press and hold for 3 seconds to turn the system on or off.
- ③ Input Power Adjustment: Allows adjustment of charging power from 600W to 3000W. Charging at lower power can extend battery life.
- ④ USB ON/OFF Button: Short press to turn USB output on or off (supports USB-A QC 3.0, USB-C PD 20W, USB-C PD 100W).
- ⑤ AC Button: Tap to enable AC output. Press and hold for 3 seconds to switch frequency (50Hz/60Hz). Press 10 times to switch voltage.
- ⑥ High Voltage PV Input: MC4 interface for high voltage photovoltaic input (2500W max, 120V-450V). Danger: High voltage. Turn off PV switch before connection/disconnection.
- ⑦ AC Input: For charging via household outlet, supporting 1800W (120V) or 3000W (220V-240V) charging for a full charge in 2.5 hours. Follow precautions regarding wall socket usage.
- ⑧ High Voltage PV Input Button: Controls the on/off of high voltage DC input for user safety.
- ⑨ Parallel Port: For connecting up to two battery packs to expand capacity, supporting a maximum input and output of 7200W.
- ⑩ ⑪ Low Voltage PV Input/Car Charger Input: Supports solar panel input (XT90 interface, 1200W max, 12V-50V) or car charger input. Only one input source can be used at a time.
- ⑫ Cooling Fans: Automatically activate when the product reaches a temperature threshold. Ensure the cooling ports are not blocked.
Introduction of Display Interface
The display interface provides information on:
- 1. Connected to AC Mains
- 2. PV/Car Charger Input
- 3. Bluetooth
- 4. WIFI
- 5. Battery Progress Bar: Rotates during charging, indicating battery level increase. Flashes when battery level is 0.
- 6. AC Output
- 7. Output Power in Total
- 8. USB Output
- 9. PD Output
- 10. Host Logo
- 11. Parallel Operation Logo
- 12. Battery Level Percentage
- 13. Remain Using/Recharging Time
- 14. High/Low Temperature Protection
- 15. Fan Status
- 16. Input Power in Total
Screen Display Description: The display shows battery status, input/output power, and provides alarm prompts.
Troubleshooting Sheet
| Phenomenon | Cause | Processing method |
|---|---|---|
| Output icon flashes and beeps. | Output exceeds rated limit and is short-circuited. | Remove the load, then short press the switch to clear the alarm. |
| Temperature warning icon flashes and beeps. | Product temperature is too high or too low. | Remove the product from the charging state, turn off the power, wait for a suitable working temperature, and then the alarm will be removed. |
| Icon of connecting to AC mains flashes and product cannot be charged. | Charging cable is poorly connected. | The overload protection function is enabled. |
| The parallel light blinks. | Parallel failure. | Charge the product with lower battery capacity, or discharge the product with higher battery capacity (until the power difference is less than 80%), and then reconnect them. |
AC Input
When charging via mains input, use the provided power cable. For single-phase input (120V), the charger delivers 1800W. For dual-phase input (240V), it provides 3000W. Connect the charger to the product's AC input port first, ensuring a click sound, then plug the charger into the AC socket.
UPS Mode
The product functions as a backup uninterruptible power supply. When connected between the wall socket and an electrical appliance with the product's power ON, it enters UPS mode. AC mains power the appliance through a bypass circuit and charges the product. Ensure total charge/discharge power is below 1800W (120V) or 7200W (220V-240V) to avoid overload protection. In 120V UPS mode, only specific ports are functional.
If AC mains are disconnected, the product switches to a bidirectional inverter circuit within 10ms, supplying power to the appliance uninterruptedly.
Battery Pack Connection Instructions
The portable power station can be connected to up to two battery packs via parallel cables, with a maximum capacity of 15666Wh. Ensure both the power station and battery packs are turned off before connecting. S1 and S2 connection icons will appear on the screen upon successful connection. The system automatically distributes power for balanced charging and discharging based on remaining capacity.
Precautions: Do not plug or unplug connecting cables while products are in use. Avoid short-circuiting the connecting ports.
Connection of Solar Panels
The product can be connected to solar panels for charging, with charging power dependent on light and weather conditions.
Specifications:
- High-Voltage PV Input (MC4 Interface): Max Power: 2500W, Voltage Range: 120V-450V.
- Low-Voltage PV Input (XT90 Interface): Max Power: 1200W, Voltage Range: 12V-50V.
Important Notes: Ensure solar panel input voltage does not exceed specified ranges. Damage from exceeding voltage limits is not covered under warranty. Follow manual instructions for proper setup.
Schemes:
- Scheme One (Low Voltage PV input - XT90): Connect solar panels in parallel, ensuring voltage is no higher than 55V.
- Scheme Two (High Voltage PV input - MC4): Connect solar panels in series, ensuring consistent parameters and voltage between 120V and 450V.
To remove HV PV panel: Clamp the main connector with the wrench's small clip and pull the PV panel's MC4 ports out.
Car/Vehicle Charging
Connect the car charging port to the product using the car charging cable. The product supports 12V/24V car charger charging. Charge when the car is started to avoid draining the car battery. Vehicle charging power is typically 120W (12V) to 240W (24V), resulting in longer charging times. For faster charging, AC mains charging is recommended.
Product Specifications
| Product Name | F7200 Portable Power Station |
|---|---|
| Dimension | L × W × H=670 × 450 × 410mm |
| Weight | 70Kg |
| Capacity | 5222.4Wh |
| AC Input | 1800W(120V), 3000W(240V) |
| AC Output | 7200W (Single-phase Port + Dual-phase Port) |
| Solar Recharging | High-voltage: 2500W max (120V-450V) Low-voltage: 1200W (12V-50V/30A) |
| USB-A Output | 18W |
| USB-C Output | 100W/20W |
| Car Charging | 12V-30V 10A |
| Shutdown Current | <500uA |
| Working Temperature | -10~40°C |
| Environment Humidity | ≤90%RH |
| Cycle Times | > 6500 times |
Battery Specifications
| Cell type | LF100LA |
|---|---|
| Rated voltage of single battery | 3.2V |
| Rated capacity of single battery | 102Ah |
| Rated voltage of battery pack | 51.2V |
| Output voltage range of the battery pack | 40V~54V |
| Rated capacity of battery pack | 5222.4Wh |
Connecting to APP
Connecting to APP:
- Step 01: Scan QR code for BrightEMS.
- Step 02: Add Device in the app.
- Step 03: Search By Bluetooth.
Connecting To Wi-Fi: Enter Wi-Fi Name and Password in the app to connect the device to the network (supports 2.4G Wi-Fi only).
FCC Statement
This equipment complies with Part 15 of the FCC Rules for Class B digital devices. It is designed to provide reasonable protection against harmful interference in residential installations. If interference occurs, users are encouraged to reorient/relocate the antenna, increase separation between equipment and receiver, connect to a different circuit, or consult a dealer/technician.
Caution: Unauthorized modifications may void the user's authority to operate the equipment.
This device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information: This equipment complies with FCC radiation exposure limits for uncontrolled environments. Maintain a minimum distance of 20cm between the radiator and your body.
Warranty Card
This product provides a 24-month warranty service from the date of purchase for quality problems within the range of normal use. Keep the product, invoices, and other items for maintenance services. Warranty may not be provided if damaged or altered, or if the sales store stamp is missing. Damage caused by use beyond normal range is not covered. Warranty scope is subject to company recognition. Products may be exchanged for those with the same function within the warranty period. Shipping and repair fees for out-of-warranty products are the customer's responsibility. Specifications and functions may be updated without prior notice.
Disclaimer
Read the user manual carefully before use. Incorrect operation may cause injury or damage to the product and property. Use of the product signifies acceptance of all terms and content. Users are responsible for their actions and consequences. The company is not responsible for losses due to failure to use the product in accordance with the manual.
The company reserves the right to interpret this document and related product documents. Updates or revisions may occur without prior notice. Visit the official website for the latest product information.
