Wavlink AC1200 High Power Outdoor Gigabit Wi-Fi Range Extender/AP/Router

Overview

The Wavlink AC1200 High Power Outdoor Gigabit Wi-Fi Range Extender/AP/Router is designed to extend your wireless network coverage.

Device Components:

• 1. 2.4G RP-SMA Antenna Connectors: For connecting 2.4GHz antennas.
• 2. 5G RP-SMA Antenna Connectors: For connecting 5GHz antennas.
• 3. Wi-Fi Signal LED: Indicates Wi-Fi signal status.
• 4. Wi-Fi LED: Indicates Wi-Fi activity.
• 5. WAN LED: Indicates WAN port connection status.
• 6. LAN LED: Indicates LAN port connection status.
• 7. Power LED: Indicates power status.
• 8. Reset button: Used to restore the device to factory default settings.
• 9. LAN port (POE): For connecting to a LAN device via PoE.
• 10. WAN port (POE): For connecting to a WAN source via PoE.
• 11. Grounding terminal: For grounding the device.

Top View: Shows antenna connectors and status LEDs.

Bottom View: Shows ports and reset button.

POE Converter: Facilitates power and data transmission over a single Ethernet cable.

LED Indicator

Wi-Fi Signal

Installation

Follow these steps to assemble the device:

1. Pass the RJ45 cable through the spiral cover.
2. Pass the RJ45 cable through the rubber seal.
3. Pass the RJ45 cable through the holder.
4. Connect the RJ45 cable to the POE IN/WAN port.
5. Spin the 2.4G antenna into the 2.4G external RP-SMA connector.
6. Spin the 5G antenna into the 5G external RP-SMA connector.
7. Screw the holder.
8. Plug the rubber seal to the holder.
9. Screw the spiral cover.

Device Mounting: Fasten the device securely to a firm location using the provided holder.

Connection Steps:

1. Connect a cable to the "POE" port of the POE converter.
2. Connect "LAN DATA IN" to the "LAN" port of your router.
3. Plug the device into the power adapter.
4. Push the "ON/OFF" button to turn the device on or off.

Configuration

1. Connection

1.1 Via Wireless

Turn on your Wi-Fi on your wireless devices (smartphone, tablet, laptop, etc.) and search for the SSID of this product. Connect to it.

For Windows users: Select "WAVLINK-N" or "WAVLINK-AC" from the available wireless networks.

For Mac users: Select "WAVLINK-N" or "WAVLINK-AC" from the Wi-Fi menu.

1.2 Via Cable

Connect an Ethernet cable from your PC/laptop's LAN port to the device's LAN port to begin configuration.

2. Accessing the Setup Page

Launch a browser on your laptop/PC or smartphone and enter wifi.wavlink.com or 192.168.10.1 in the address field. The default password is admin.

3. Select Operating Mode

Choose the mode that best suits your needs:

• Router: Connects as a router to a modem or another router via the WAN port.
• LAN Bridge (AP): The device's WAN or LAN port connects to the router, allowing multiple clients to share the internet.
• Wi-Fi Repeater: Connects as a Wi-Fi client to another Wi-Fi network.

3.1 Wi-Fi Repeater Mode

Choose an existing Wi-Fi network to connect to and enter its password.

3.2 Router Mode

Select your Internet type (PPPoE, Static IP, Dynamic IP) and enter the required credentials.

WAN Type Selection Guide:

• PPPoE: Use if your ISP provides a DSL line with an account name and password.
• Dynamic IP (DHCP): Use if you have a cable TV or fiber cable connection.
• Static IP: Use if you are provided with specific IP address, Subnet Mask, and Default Gateway information.

3.3 LAN Bridge (AP mode)

Set the Wi-Fi AP security information, including SSID, Security Type, and Wi-Fi Password.

Network Signal Flow:

• Router/AP Mode: Wireless signal originates from the Aerial HD4.
• Repeater Mode: Wireless signal originates from the main router.

Wi-Fi Configuration

On the Wi-Fi configuration page, you can change the Wi-Fi name (SSID), Security Type, and Wi-Fi Password.

Note: In Repeater mode, the Wi-Fi password must match the host Wi-Fi's password.

2.4G Wi-Fi Settings: Configure Wi-Fi, Hide Wi-Fi, 2.4G SSID, Security Type, and Wi-Fi Password.

5G Wi-Fi Settings: Configure Wi-Fi, Hide Wi-Fi, 2.4G SSID, Security Type, and Wi-Fi Password.

Apply

Firmware Upgrade

Follow these steps to update the device firmware:

1. Download the latest firmware file from www.wavlink.com.
2. Extract the firmware from the downloaded file.
3. Log in to wifi.wavlink.com or 192.168.10.1, navigate to "Setup", and select "Upgrade Firmware".
4. Click "Browse/Choose File" to locate the firmware file.
5. Click "Apply" and wait for the firmware upgrade process to complete.

For more details, visit www.wavlink.com or contact Technical Support at support@wavlink.com.

FAQ

1. Why doesn't the login page appear after entering http://wifi.wavlink.com?
   • Ensure your PC is set to obtain an IP address automatically.
   • Verify that you have entered the correct website address.
   • Reboot your device and try again.
2. What can I do if I cannot access the Internet?
   • Ensure your internet connection is working properly. Contact your ISP if it is not.
   • Initiate your browser, enter 192.168.10.1 or wifi.wavlink.com, and follow the quick start guide for setup.
   • Reboot your device and try again.
3. How do I restore the device to factory default setting?

   Press and hold the reset button of the device for 6 seconds.

4. What can I do if I forget my administration management password?

   Refer to Q3 to reset the device. The default password is admin.

5. How do I find the best location for mesh devices?

   Place your mesh devices in an open space, avoiding obstacles like metal objects and reinforced concrete walls.

For more details, please visit https://www.wavlink.com/en_us/faq.html.

GNU GENERAL PUBLIC LICENSE NOTICE

This product incorporates software developed by third parties, subject to the GNU General Public License (GPL) Version 2 or the GNU Lesser General Public License (LGPL) Version 2.1. You may copy, distribute, and modify the software according to the terms of GPL or LGPL.

If you require source code files under the GNU General Public License (GPL), please contact Wavlink. Wavlink is committed to meeting the requirements of the GNU General Public License (GPL).

Please provide your contact details (full address) and the product code. Wavlink will send a software package with the software and license free of charge.

The programs are distributed WITHOUT ANY WARRANTY, including the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

For more information, refer to the GNU General Public License websites:

• http://www.gnu.org/licenses/old-licenses/lgpl-2.0.html
• http://www.gnu.org/licenses/gpl.html

WEEE Directive & Product Disposal

At the end of its service life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment, or returned to the supplier for disposal.