Victron Energy Lynx Smart BMS

Introduction to the Lynx Smart BMS

The Victron Energy Lynx Smart BMS is a sophisticated Battery Management System designed for Victron Lithium Battery Smart batteries. It supports nominal voltages of 12.8V and 25.6V across various capacities, offering a robust solution for managing lithium battery banks. This system is crucial for protecting batteries from deep discharge and overcharging, ensuring optimal performance and longevity.

Key features include a built-in 500A or 1000A contactor for safety and remote control, an integrated battery monitor for state-of-charge indication, and pre-alarm functionality to warn of impending low cell voltage shutdowns. The BMS also offers Bluetooth connectivity for setup and monitoring via the VictronConnect App, and integrates with Victron GX devices for local and remote monitoring through the VRM portal.

The Lynx Smart BMS seamlessly integrates with the Victron Lynx Distributor system, enhancing ease of installation and system expandability. It is available in 500A and 1000A versions, both featuring M10 busbars.

Key Features and Capabilities

• Advanced Battery Management System (BMS) for monitoring and protection.
• Integrated 500A or 1000A contactor for safety and system control.
• Built-in battery monitor for state of charge and other critical data.
• Pre-alarm feature to prevent system shutdown.
• Bluetooth connectivity for use with the VictronConnect App.
• VE.Can interface for communication with GX devices and NMEA 2000 networks.
• Seamless integration with the Victron Lynx Distributor system.
• Support for parallel redundant configurations of multiple Lynx Smart BMS units.

Installation and Configuration

This manual provides detailed instructions for the installation and configuration of the Lynx Smart BMS. It covers mechanical connections, electrical wiring, system sizing, and essential safety precautions. Proper installation is critical to ensure the safe and efficient operation of the battery system.

Users are advised to consult the manual for specific guidance on connecting DC wires, mounting modules, and configuring system settings through the VictronConnect App or a GX device.

Troubleshooting and Support

The document includes a comprehensive troubleshooting section to address common issues related to the Lynx Smart BMS, battery monitoring, and VictronConnect software. It offers solutions for problems such as the BMS not powering up, operational issues, and inaccurate battery readings.

For further assistance, users can refer to the technical specifications and appendix, which provide detailed information on LED indications, error codes, and supported protocols.

Further Information

For more in-depth information on system design, cabling, and fusing, refer to Victron Energy's technical documentation, including the 'Wiring Unlimited' book.

Explore the capabilities of the Victron Energy Lynx Smart BMS and ensure optimal performance for your energy storage systems.