Spanninga O-Guard Battery Instruction Manual

Step 1: Mounting

1 Attach the light bracket to the bicycle's rear fender or seat post using the provided hardware (nut and bolt).

Visual description: An illustration shows the light unit and its mounting bracket being attached to the rear of a bicycle, near the wheel, with a nut and bolt.

Step 2: Operation

2 Press the button on the light to operate.

1x ON, 2x OFF

Maximum operation time: max. 50h

Visual description: A hand is shown pressing the button on the light. An indicator shows a low battery status ([low battery symbol]).

Step 3: Battery Insertion

3 Insert batteries into the compartment.

Requires 2 x AAA / LR03 batteries.

Visual description: A hand is shown inserting two AAA/LR03 batteries into the open battery compartment of the light.

Step 4: Closing Compartment

4 Secure the battery compartment cover.

Visual description: An illustration shows the light unit with its cover being closed.

Step 5: Final Check

5 Verify battery installation.

Visual description: The light unit is shown with the battery compartment closed, displaying the inserted AAA/LR03 batteries with correct polarity markings (+/-).