TCPDF
Machine.Market
Tractor Manuals PDF free download
Owner's Manual for GALLMAC models including: TG10, TG10 Wheeled Multifunction Machine, Wheeled Multifunction Machine, Multifunction Machine, Machine
GALLMAC Excavator Tech Manuals PDF free download
File Info : application/pdf, 9 Pages, 4.52MB
DocumentDocumentMACHINES https://tractormanualz.com/ Courtesy of Machine.Market Wheeled Multifunction Machine TG10 Gallmac machines are building site service vehicles specially designed for maximum efficiency in areas where space is limited such as town centers, along one-lane roads, or on work sites with limited maneuverability. The extreme versatility allows on-site work to be performed using just one machine instead of several single purpose equipment. The turret of the machine has 360° stepless rotation and remains within the overall dimensions of the machine when outriggers are in working conditions. The articulated boom's lateral digging ability is also used to enhance tool changing capacity, and the quick connect/disconnect hydraulic couplings enable quick power tool changing. 4606 2880 R 1375 10% 1860 2300 R 1375 ±3003 Performance Traction force Max speed Max flow (arm mov. circuit) Pressure (arm mov. circuit) 5700 daN 30 km/h 156 l/min 270 bar Note: the max speed may change according to tires and configuration Characteristics Max height Max width Max length Mass 3003 mm 2300 mm 4909 mm 9600 kg Engine Diesel Cooling system Electrical system 74.5 kW (100 hp) water 12 V Hydraulic Transmission Closed hydraulic circuit for hydrostatic drive with variable displacement pump/motor and "automotive" adjustment. Open hydraulic circuit with load sensing adjustment. Configuration Seat with mechanical suspension Stabilizing / leveling blade Load sensing proportional valves for simultaneous movements Safety valves on all cylinders to prevent boom falls 2 steering axles allow 3 steering mode: on the rear wheels for road mode, four wheel steer to reduce the turning radius, crab steering Swinging rear axles provided with 45% selflocking differential Swinging rear axle blocking device Hydraulic wet disc brake with 4 friction plates Parking brakes spring apply and automatic hydraulic release Cab with Rops and Fops structure Overload buzzer Backward drive buzzer Independent oil fired heating system (4 kW) Side excavating hydraulic system 35° left 25° right Bucket link with lifting hook (5 ton) Manual Centralized greasing (n° 4 points) 1° Auxiliary hydraulic line with quick couplings Vertical exhaust discharge Tires 16/70- R20 Quick hydraulic coupling for equipment replacement ±560 215 34° 393 215 250 178 ±865 ±1524 2270 1115 ±4909 Tesmec S.p.A. Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.335664 Manufacturing facilities Manufacturing facilities https://tractormanualz.com/ Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375 Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562 010 Ed. 2013 PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARCIAToIOuNrSteWsIyTHoOfUTMNaOcTIhCEinAeR.EMPOaSrSkIBeLtE Wheeled Multifunction Machine TG10 Working diagrams (m) 8 7 R 889 (mm) 6 5 45° 45° 4 3 2 1 0 -1 -2 -3 -4 76543210 (m) (m) 8 7 R 1255 (mm) 6 5 4 3 2 1 0 -1 -2 -3 -4 876543210 (m) 900 Kg 1500 Kg 2000 Kg 1300 Kg 1650 Kg 2000 Kg 2500 Kg 3200 Kg Loading diagrams (m) 8 7 6 5 4 3 2 1 0 -1 -2 -3 7654 210 (m) (m) 8 7 6 5 4 3 2 1 0 -1 -2 -3 76543210 (m) Additional Devices ALL012 ALL032 ALL033 ALL034 ALL035 ALL036 ALL042 ALL043 ALL052 ALL062 ALL063 ALL072 ALL082 ALL092 ALL093 ALL102 ALL112 ALL132 OPT001 OPT003 OPT004 OPT005 OPT006 OPT007 OPT009 OPT010 OPT011 OPT012 Seat with pneumatic suspension Stabilizing/leveling blade with stabilizers Front Stabilizer Stabilizing/leveling blade with forks support Stabilizing/leveling blade with stabilizers and forks support "Greader" Blade ±20° Tires 18 x 19.5 Tires 425/75-R20 Front axle with 45% self-locking differential Adjustable Bucket link Adjustable Bucket link with lifting hook Automatic greasing for turret Air conditioning system 2° and 3° arm synchronization Pedal to Lever Inversion control 2° Auxiliary hydraulic line Working brake Working elevating platform Central outriggers Engine case protection Fuel charge pump Kit mudguards Radio/cd/mp3 Player Radio/cd/mp3 Player + USB and bluetooth Directional drill/ mixing bucket predisposition Highlight led beacon (not for road circulation) Led Working light Auxiliary hydraulic line for hammer return &HUWL¿HG«4XDOLW\«6\VWHP ISO 9001:2008 Ed. 2013 https://tractormanualz.comKe/ep you updated on: www.tesmec.com 010 PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARCIAToIOuNrSteWsIyTHoOfUTMNaOcTIhCEinAeR.EMPOaSrSkIBeLtE Wheeled Multifunction Machine TG12 Gallmac machines are building site service vehicles specially designed for maximum efficiency in areas where space is limited such as town centers, along one-lane roads, or on work sites with limited maneuverability. The extreme versatility allows on-site work to be performed using just one machine instead of several single purpose equipment. The turret of the machine has 360° stepless rotation and remains within the overall dimensions of the machine when outriggers are in working conditions. The articulated boom's lateral digging ability is also used to enhance tool changing capacity, and the quick connect/disconnect hydraulic couplings enable quick power tool changing. 4871 3064 R 1450 10% 1860 2340 R 1450 ±3035 Performance Traction force Max speed Max flow (arm mov. circuit) Pressure (arm mov. circuit) 7700 daN 32 km/h 156 l/min 285 bar Note: the max speed may change according to tires and configuration Characteristics Max height Max width Max length Mass 3035 mm 2340 mm 4980 mm 11000 kg Engine Diesel Cooling system Electrical system 74.5 kW (100 hp) water 12 V Hydraulic Transmission Closed hydraulic circuit for hydrostatic drive with variable displacement pump/motor and "automotive" adjustment. Open hydraulic circuit with load sensing adjustment. Configuration Seat with mechanical suspension Stabilizing / leveling blade Load sensing proportional valves for simultaneous movements Safety valves on all cylinders to prevent boom falls 2 speed gear boxes 2 steering axles allow 3 steering mode: on the rear wheels for road mode, four wheel steer to reduce the turning radius, crab steering Swinging rear axles provided with 45% selflocking differential Swinging rear axle blocking device Hydraulic wet disc brake with 4 friction plates Parking brakes spring apply and automatic hydraulic release Cab with Rops and Fops structure Overload buzzer Backward drive buzzer Independent oil fired heating system (4 kW) Side excavating hydraulic system 35° left 25° right Bucket link with lifting hook (5 ton) Manual Centralized greasing (n° 4 points) 1° Auxiliary hydraulic line with quick couplings Vertical exhaust discharge Tires 16/70- R20 Quick hydraulic coupling for equipment replacement ±560 200 37° 375 200 250 175 ±875 ±1605 2350 1025 ±4980 Tesmec S.p.A. Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.335664 Manufacturing facilities Manufacturing facilities https://tractormanualz.com/ Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375 Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562 020 Ed. 2013 PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARCIAToIOuNrSteWsIyTHoOfUTMNaOcTIhCEinAeR.EMPOaSrSkIBeLtE Wheeled Multifunction Machine TG12 1300 Kg 2000 Kg 2200 Kg 2500 Kg 3000 Kg 2000 Kg 2500 Kg 3000 Kg 4000 Kg Working diagrams (m) 8 7 R 924 (mm) 6 5 4 45° 3 45° 2 1 0 -1 -2 -3 -4 76543210 (m) Loading diagrams (m) 8 7 6 5 4 3 2 1 0 -1 -2 -3 7654 210 (m) (m) 8 7 R 1284 (mm) 6 5 4 3 2 1 0 -1 -2 -3 -4 876543210 (m) (m) 8 7 6 5 4 3 2 1 0 -1 -2 -3 7654 210 (m) Additional Devices ALL012 ALL032 ALL033 ALL034 ALL035 ALL036 ALL042 ALL043 ALL052 ALL062 ALL063 ALL072 ALL082 ALL092 ALL093 ALL102 ALL112 ALL132 ALL133 OPT001 OPT003 OPT004 OPT005 OPT006 OPT007 OPT009 OPT010 OPT011 OPT012 Seat with pneumatic suspension Stabilizing/leveling blade with stabilizers Front Stabilizer Stabilizing/leveling blade with forks support Stabilizing/leveling blade with stabilizers and forks support "Greader" Blade ±20° Tires 18 x 19.5 Tires 425/75-R20 Front axle with 45% self-locking differential Adjustable Bucket link Adjustable Bucket link with lifting hook Automatic greasing for turret Air conditioning system 2° and 3° arm synchronization Pedal to Lever Inversion control 2° Auxiliary hydraulic line Working brake Working elevating platform Trenching device Central outriggers Engine case protection Fuel charge pump Kit mudguards Radio/cd/mp3 Player Radio/cd/mp3 Player + USB and bluetooth Directional drill/ mixing bucket predisposition Highlight led beacon (not for road circulation) Led Working light Auxiliary hydraulic line for hammer return &HUWL¿HG«4XDOLW\«6\VWHP ISO 9001:2008 Ed. 2013 https://tractormanualz.comKe/ep you updated on: www.tesmec.com 020 PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARCIAToIOuNrSteWsIyTHoOfUTMNaOcTIhCEinAeR.EMPOaSrSkIBeLtE Wheeled Multifunction Machine with Trencher TG12 TRS - Chainsaw The digging frame consists of a digging chain and a motorized wheel to which are attached a support and drive wheel, the chain saw and the plate with quick coupling. The most important feature is the synchronism of this wheel with the tractor wheels which assures the maximum digging performances. This attachments provides maximum digging capability, thus making the TG12 even more versatile. 4000 900 1000 250 17 18 Performance Traction force Max speed Max flow (arm mov. circuit) Pressure (arm mov. circuit) 7700 daN 32 km/h 156 l/min 285 bar Note: the max speed may change according to tires and configuration Characteristics Max height Max width Max length Mass 3035 mm 2340 mm 4980 mm 11000 kg Engine Diesel Cooling system Electrical system 74.5 kW (100 hp) water 12 V Hydraulic Transmission Closed hydraulic circuit for hydrostatic drive with variable displacement pump/motor and "automotive" adjustment. Open hydraulic circuit with load sensing adjustment. Trencher Predisposition Second extra-circuit on boom Modifications on the hydraulic system to feed the trencher Additional radiator for hydraulic oil Modifications on controls to operate the Trencher attachment Digging width Digging depth 20-35 cm 60-120 cm Configuration Seat with mechanical suspension Stabilizing / leveling blade Central stabilizers Load sensing proportional valves for simultaneous movements Safety valves on all cylinders to prevent boom falls 2 speed gear boxes 2 steering axles allow 3 steering mode: on the rear wheels for road mode, four wheel steer to reduce the turning radius, crab steering Swinging rear axles provided with 45% selflocking differential Swinging rear axle blocking device Hydraulic wet disc brake with 4 friction plates Parking brakes spring apply and automatic hydraulic release Cab with Rops and Fops structure Overload buzzer Backward drive buzzer Independent oil fired heating system (4 kW) Side excavating hydraulic system 35° left 25° right Bucket link with lifting hook (5 ton) Manual Centralized greasing (n° 4 points) 1° Auxiliary hydraulic line with quick couplings Vertical exhaust discharge Tires 16/70- R20 Quick hydraulic coupling for equipment replacement &HUWL¿HG«4XDOLW\«6\VWHP ISO 9001:2008 Keep you updated on: www.tesmec.com Tesmec S.p.A. Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.335664 Manufacturing facilities Manufacturing facilities https://tractormanualz.com/ Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375 Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562 030 Ed. 2013 PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARCIAToIOuNrSteWsIyTHoOfUTMNaOcTIhCEinAeR.EMPOaSrSkIBeLtE Wheeled Multifunction Machine with Trencher TG12 TRS - Rocksaw The digging system consists of a disk and a motorized wheel to which are attached a support and drive wheel, the rock saw and the plate with quick coupling. The most important feature is the synchronism of this wheel with the tractor wheels which assures the maximum digging performances. This is the ideal machine for urban cabling in limited space, and with limited maneuverability. MAX 400 MAX 3500 MAX 120 The minimum digging point from tires side is 1250 mm. Performance Traction force Max speed Max flow (arm mov. circuit) Pressure (arm mov. circuit) 7700 daN 32 km/h 156 l/min 285 bar Note: the max speed may change according to tires and configuration Characteristics Max height Max width Max length Mass 3035 mm 2340 mm 4980 mm 11000 kg Engine Diesel Cooling system Electrical system 74.5 kW (100 hp) water 12 V Hydraulic Transmission Closed hydraulic circuit for hydrostatic drive with variable displacement pump/motor and "automotive" adjustment. Open hydraulic circuit with load sensing adjustment. Trencher Predisposition Second extra-circuit on boom Modifications on the hydraulic system to feed the trencher Additional radiator for hydraulic oil Modifications on controls to operate the Trencher attachment Digging width Digging depth 7-12 cm 40 cm Configuration Seat with mechanical suspension Stabilizing / leveling blade Central stabilizers Load sensing proportional valves for simultaneous movements Safety valves on all cylinders to prevent boom falls 2 speed gear boxes 2 steering axles allow 3 steering mode: on the rear wheels for road mode, four wheel steer to reduce the turning radius, crab steering Swinging rear axles provided with 45% selflocking differential Swinging rear axle blocking device Hydraulic wet disc brake with 4 friction plates Parking brakes spring apply and automatic hydraulic release Cab with Rops and Fops structure Overload buzzer Backward drive buzzer Independent oil fired heating system (4 kW) Side excavating hydraulic system 35° left 25° right Bucket link with lifting hook (5 ton) Manual Centralized greasing (n° 4 points) 1° Auxiliary hydraulic line with quick couplings Vertical exhaust discharge Tires 16/70- R20 Quick hydraulic coupling for equipment replacement &HUWL¿HG«4XDOLW\«6\VWHP ISO 9001:2008 Keep you updated on: www.tesmec.com Tesmec S.p.A. Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.335664 Manufacturing facilities Manufacturing facilities https://tractormanualz.com/ Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375 Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562 040 Ed. 2013 PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARCIAToIOuNrSteWsIyTHoOfUTMNaOcTIhCEinAeR.EMPOaSrSkIBeLtE Wheeled Multifunction Machine TG14 Gallmac machines are building site service vehicles specially designed for maximum efficiency in areas where space is limited such as town centers, along one-lane roads, or on work sites with limited maneuverability. The extreme versatility allows on-site work to be performed using just one machine instead of several single purpose equipment. The turret of the machine has 360° stepless rotation and remains within the overall dimensions of the machine when outriggers are in working conditions. The articulated boom's lateral digging ability is also used to enhance tool changing capacity, and the quick connect/disconnect hydraulic couplings enable quick power tool changing. 3350 R 1625 8% 1990 2450 R 1625 ±3178 Performance Traction force Max speed Max flow (arm mov. circuit) Pressure (arm mov. circuit) 8600 daN 30 km/h 198 l/min 285 bar Note: the max speed may change according to tires and configuration Characteristics Max height Max width Max length Mass 3178 mm 2450 mm 6017 mm 14000 kg Engine Diesel Cooling system Electrical system 93.2 kW (125 hp) water 12 V Hydraulic Transmission Closed hydraulic circuit for hydrostatic drive with variable displacement pump/motor and "automotive" adjustment. Open hydraulic circuit with load sensing adjustment. Configuration Seat with mechanical suspension Stabilizing / leveling blade Load sensing proportional valves for simultaneous movements Safety valves on all cylinders to prevent boom falls 2 speed gear boxes 2 steering axles allow 3 steering mode: on the rear wheels for road mode, four wheel steer to reduce the turning radius, crab steering Swinging rear axles provided with 45% selflocking differential Swinging rear axle blocking device Hydraulic wet disc brake with 4 friction plates Parking brakes spring apply and automatic hydraulic release Cab with Rops and Fops structure Overload buzzer Backward drive buzzer Independent oil fired heating system (4 kW) Side excavating hydraulic system 30° Bucket link with lifting hook (5 ton) Manual Centralized greasing (n° 4 points) 1° Auxiliary hydraulic line with quick couplings Vertical exhaust discharge Tires 18 x 22.5 Quick hydraulic coupling for equipment replacement 5605 186 180 366 215 ±620 35° 250 ±952 ±2365 2575 1080 ±6017 Tesmec S.p.A. Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.335664 Manufacturing facilities Manufacturing facilities https://tractormanualz.com/ Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375 Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562 050 Ed. 2013 PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARCIAToIOuNrSteWsIyTHoOfUTMNaOcTIhCEinAeR.EMPOaSrSkIBeLtE Wheeled Multifunction Machine TG14 56° 45° Working diagrams (m) 9 8 R 1145 (mm) 7 6 5 4 3 2 1 0 -1 -2 -3 -4 -5 876543210 (m) (m) 9 8 R 1425 (mm) 7 6 5 4 3 2 1 0 -1 -2 -3 -4 -5 876543210 (m) 1700 Kg 2000 Kg 2400 Kg 2900 Kg 3500 Kg 4000 Kg 2100 Kg 2500 Kg 3000 Kg 3600 Kg 5000 Kg Loading diagrams (m) 9 8 7 6 5 4 3 2 1 0 -1 -2 -3 -4 876543210 (m) 7 6 5 4 3 2 1 0 -1 -2 -3 -4 -5 76543210 (m) Additional Devices ALL012 ALL032 ALL033 ALL034 ALL035 ALL036 ALL052 ALL062 ALL063 ALL072 ALL082 ALL092 ALL093 ALL102 ALL112 ALL132 ALL133 OPT001 OPT003 OPT004 OPT005 OPT006 OPT007 OPT009 OPT010 OPT011 OPT012 Seat with pneumatic suspension Stabilizing/leveling blade with stabilizers Front Stabilizer Stabilizing/leveling blade with forks support Stabilizing/leveling blade with stabilizers and forks support "Greader" Blade ±20° Front axle with 45% self-locking differential Adjustable Bucket link Adjustable Bucket link with lifting hook Automatic greasing for turret Air conditioning system 2° and 3° arm synchronization Pedal to Lever Inversion control 2° Auxiliary hydraulic line Working brake Working elevating platform Trenching device Central outriggers Engine case protection Fuel charge pump Kit mudguards Radio/cd/mp3 Player Radio/cd/mp3 Player + USB and bluetooth Directional drill/ mixing bucket predisposition Highlight led beacon (not for road circulation) Led Working light Auxiliary hydraulic line for hammer return &HUWL¿HG«4XDOLW\«6\VWHP ISO 9001:2008 Keep you updated on: www.tesmec.com Powered by TCPDF (www.tcpdf.org) Tesmec S.p.A. Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.335664 Manufacturing facilities Manufacturing facilities https://tractormanualz.com/ Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375 Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562 050 Ed. 2013 PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARCIAToIOuNrSteWsIyTHoOfUTMNaOcTIhCEinAeR.EMPOaSrSkIBeLtE