JVC KW-AVX Series: iPod/iPhone Connection and MotionX-GPS Setup Guide
Models: KW-AVX848 / KW-AVX840 / KW-ADV794 / KW-AVX748 / KW-AVX740 / KW-AVX640
Document Reference: LVT2312-002A [J/JW] For Americas
Connections and Settings for Using iPod/iPhone on the Unit
1. Check the connected cable.
For listening to music: Use a USB 2.0 cable (accessory of the iPod/iPhone).
Diagram Description: A visual shows a connection from an iPod/iPhone device to a USB cable, which then connects to the rear of a JVC unit.
For watching video and listening to music: Use a USB Audio and Video cable (JVC KS-U30, separately purchased).
Diagram Description: A visual illustrates the JVC KS-U30 cable. One end has connectors for Video In and Line In (audio). This cable connects to the iPod/iPhone. The other end connects to the JVC unit.
Caution: Videos cannot be played if connected with any cable other than the JVC KS-U30.
2. Set <Input> on the unit.
The specific setting on the unit varies depending on the connected cable.
1. Turn off the AV source.
Screen Description: The AV Menu is displayed, showing icons for HD Radio, SAT, DISC, USB, iPod, Bluetooth, and AV-IN. A hand icon is shown pointing to and selecting 'AV Off'.
2. Display the <Settings> screen.
Screen Description: The AV Menu is displayed again. A hand icon is shown pointing to and selecting the 'Settings' icon.
3. Display the <Input> screen.
Screen Description: The Settings menu is displayed with tabs for Settings, Audio, Display, Input, and System. A hand icon is shown pointing to and selecting the 'Input' tab.
4. When connected with a USB 2.0 cable:
Set <Audio Input> to <AV-IN>.
For KW-AVX848/KW-AVX840/KW-ADV794/KW-AVX748/KW-AVX740:
Screen Description: The Input screen shows 'Audio Input' set to 'AV-IN' and 'Video Input' set to 'iPod'. A hand icon points to the 'iPod' selection for Video Input.
For KW-AVX640:
Screen Description: The Input screen shows 'Audio Input' set to 'AV-IN' and 'Video Input' set to 'iPod'. A hand icon points to the 'iPod' selection for Video Input.
You can listen to the music.
When connected with JVC KS-U30:
Set <Audio Input> and <Video Input> to <iPod>.
For KW-AVX848/KW-AVX840/KW-ADV794/KW-AVX748/KW-AVX740:
Screen Description: The Input screen shows 'Audio Input' set to 'iPod' and 'Video Input' set to 'iPod'. A hand icon points to the 'iPod' selection for Video Input.
For KW-AVX640:
Screen Description: The Input screen shows 'Audio Input' set to 'iPod' and 'Video Input' set to 'iPod'. A hand icon points to the 'iPod' selection for Video Input.
You can watch the video and listen to the music.
Using iPhone Navigation App (MotionX-GPS)
1. Confirm that the unit is connected with JVC KS-U30 (separately purchased).
MotionX-GPS cannot be used if connected with any cable other than JVC KS-U30.
Diagram Description: A visual shows an iPhone connected via the JVC KS-U30 cable to the unit's rear ports, specifically Video In and Line In.
2. Change the settings for using MotionX-GPS.
1. Turn off the AV source.
Screen Description: The AV Menu is displayed, showing icons for HD Radio, SAT, DISC, USB, iPod, Bluetooth, and AV-IN. A hand icon is shown pointing to and selecting 'AV Off'.
2. Set <Input> on the unit.
Screen Description: The AV Menu is displayed. A hand icon points to the 'Settings' icon. Then, the Input screen is shown with 'Audio Input' set to 'AV-IN' and 'Video Input' set to 'iPod'. A hand icon points to the 'iPod' selection for Video Input.
3. Display the "iPod" source control screen.
Screen Description: The screen displays 'Navigation' and an 'Enter' button. A hand icon is shown pointing to the 'Enter' button.
4. Display the <Mode> screen.
Screen Description: The AV Menu is displayed. A hand icon is shown pointing to and selecting the 'Mode' button.
5. Set <iPod Control> to <External>.
Screen Description: The Mode screen shows options for 'Audiobooks', 'Normal', 'Faster', 'Slower'. Under 'iPod Control', options are 'Head', 'iPod', 'External'. A hand icon is shown pointing to and selecting 'External'.
3. Start MotionX-GPS from your iPhone.
Select "iPod" as the source on the unit.
The map displayed on the connected iPhone appears on the unit's display.
4. Caution
MotionX-GPS cannot be operated directly on the unit. Use the iPhone to operate it.
