BSP-D3 Wireless Game Controller Guide

Front View Controls:

• ● LB Button (Left Bumper)
• ● RB Button (Right Bumper)
• ● LED1/LED2/LED3 (Indicator Lights)
• ● Left Joystick / L3 Button (Press Left Joystick)
• ● HOME Button
• ● Up Down Left Right Button (D-Pad)
• ● A/B/X/Y Buttons
• ● SELECT Button
• ● Charging Interface (USB-C Port)
• ● START Button
• ● Right Joystick / R3 Button (Press Right Joystick)

Rear View Controls:

• ● RT Button (Right Trigger)
• ● LT Button (Left Trigger)
• ● M2 Button (Programmable Button)
• ● M1 Button (Programmable Button)

Note: The controller has a working voltage of DC5V and input of DC5V 500mA. It offers approximately 20 hours of duration.

iPhone / iOS MFI Mode

• 1. To start pairing, press the B button and the Power button ⏻ at the same time.
• 2. LED2 will flash during pairing.
• 3. On your iOS device, search for the device name "DUALSHOCK 4 Wireless Controller".
• 4. Once connected, LED3 will stay on.

Note: Ensure that the games or applications you intend to use have controller support. This mode is also compatible with MacBooks and iPad.

Android Phones

The controller supports two modes for Android devices:

Android Standard Mode

• 1. To start pairing, press the X button and the Power button ⏻ at the same time.
• 2. LED2 will flash during pairing.
• 3. On your Android device, search for the device name "BSP-D3".

Xbox Controller Mode

• 1. To start pairing, press the RB button and the Power button ⏻ at the same time for 3 seconds.
• 2. LED2 will flash during pairing.
• 3. On your Android device, search for the device name "Xbox Wireless Controller".

Note: Games or applications must have controller support. The Xbox controller mode is also compatible with Windows computers.

Nintendo Switch / Switch Mode

• 1. On your Nintendo Switch console, navigate to "Controllers" > "Change Grip/Order".
• 2. On the BSP-D3 controller, press the RT button and the Power button ⏻ to enter Switch mode.
• 3. Then, press the LB button and RB button at the same time to initiate pairing.
• 4. If pairing is successful, LED1 and LED2 will stay on for an extended period.

PS4 / PS5

• 1. Connect the BSP-D3 controller to your PS3 or PS4 console using a Type-C USB data cable.
• 2. Press the Power button ⏻ on the controller to align the code.
• 3. LED1 and LED2 will flash during this process.
• 4. Upon successful connection, LED3 will light up.