Troubleshooting Air Fryer Power Issues
Common Power Solution Steps
If your air fryer is not powering on, follow these troubleshooting steps:
Step 1: Check the Socket
Ensure the power socket is securely connected and functioning correctly. Try plugging in another appliance to verify the socket's power supply.
Visual: An air fryer with its lid open, showing the induction switch area.
Step 2: Check the Inner Pan Sensor
Remove the inner pan. Check if the pan edge sensor is clean and if the inner pan fits tightly when inserted. Lift the inner pan slightly to ensure proper seating.
Visual: An air fryer basket being lifted out, with an arrow pointing to the pan edge sensor.
Step 3: Reinsert the Inner Pan
When putting the inner pan back, ensure it is inserted correctly and goes up a little bit to engage the sensor properly.
Visual: An air fryer basket being reinserted, with an arrow indicating it needs to go up slightly.
Step 4: Power On After Detection
Once the inner pan is correctly in place and the sensor is engaged, attempt to power on the air fryer. The screen should light up if the issue is resolved.
Visual: The air fryer with the inner pan inserted, showing the control panel lighting up.
Additional Checks
- Try replacing a few sockets if the initial check suggests a faulty socket.
