Case IH Hay and Forage Equipment
Maximize your hay harvesting season with Case IH conventional hay tools, designed for efficiency, reliability, and high-quality output. Case IH offers a complete lineup of innovative equipment to meet diverse operational needs.
Mowing and Conditioning
Case IH disc mowers and mower conditioners deliver fast, clean cutting and superior conditioning for optimal hay quality and windrow formation.
Mounted Disc Mowers (MD73/MD83/MD93)
These disc mowers offer clean-cutting performance, maneuverability, and durability. They feature a modular cutterbar with heat-treated components and shock hub protection for each disc. The MD73, MD83, and MD93 models provide improved suspension for stable transport with ample ground clearance and a cutterbar transport lock. The cutterbar is spring-balanced for smooth operation over uneven terrain and features single-point adjustment for V-belt tension. A tethered pin activates the flotation spring. The cutterbar is backed by a three-year warranty.
| Feature | MD73 | MD83 | MD93 |
|---|---|---|---|
| Cutting Width | 6' 8" (2040 mm) | 7' 10" (2400 mm) | 9' 2" (2800 mm) |
| Cutting Height | .95"-3.25" (24-82.5 mm) | .95"-3.25" (24-82.5 mm) | .95"-3.25" (24-82.5 mm) |
| Disc Speed | 3,000 RPM | 3,000 RPM | 3,000 RPM |
| PTO HP Required | 35-60 HP | 45 HP | 55 HP |
| Discs | 5 oval | 6 oval | 7 oval |
| Cutterbar Warranty | 3-Year | 3-Year | 3-Year |
Pull-Type Disc Mowers (TD103)
The TD103 pull-type disc mower provides a smooth ride, clean cut, and superior trailing ability. It features a low transport height and easy tractor hookup. The machine utilizes a modular cutterbar design similar to the MD3 series, including quick-change knives and shock hub protection, backed by a three-year cutterbar warranty. Vertical and lateral flotation is achieved through adjustable rear springs for even cutting on tough terrain. The side-pull tongue design centers behind the tractor for easy transport. Crop deflector shields direct crop into a wide swath inside the tire path.
| Feature | TD103 |
|---|---|
| Cutting Width | 10' 4" |
| Disc Speed | 2,835 RPM |
| Cutting Height | .95"-3.2" |
| PTO HP Required | 60 HP |
| Discs | 8 oval |
| Cutterbar Warranty | 3-Year |
Disc Mower Conditioners (Center Pivots: DC105/DC125/DC135/DC165)
These center-pivot disc mower conditioners offer fast cutting and high-quality conditioning. They feature a low-profile cutterbar and wide discs for a cleaner cut, promoting faster crop regrowth. Counter-rotating discs efficiently feed crop into conditioners, minimizing plugging. Adjustments for windrow shields, swathgate, cutting height, and conditioning roll pressure can be made without tools. Heavy-duty, quick-change knives cut replacement time in half. Hitch options include drawbar swivel or 2-point swivel hitches for maximum turning performance. The modular cutterbar design provides superior lubrication and protection via external shear hubs. All DC3 mower conditioner cutterbars are backed by a three-year warranty.
| Model | Cutting Width | PTO HP Required |
|---|---|---|
| DC105 | 9' 2" | 65-100 HP |
| DC125 | 11' 7" | 80-100 HP |
| DC135 | 13' 4" | 85-100 HP |
| DC165 | 16' 7" | 90-100 HP |
Disc Mower Conditioners (Side-pull: DC93/DC103)
Case IH side-pull disc mower conditioners deliver high-quality hay with less horsepower. They feature a low-profile cutterbar for a cleaner cut and faster regrowth. Counter-rotating discs ensure efficient crop feeding. Conditioning systems (rubber-on-rubber or flail) provide faster dry-down. Adjustments for windrow shields, swathgate, cutting height, and conditioning roll pressure are tool-free. Heavy-duty, quick-change knives are reversible for extended life. The DC103 offers standard clevis hitch, drawbar swivel, or 2-point swivel hitch options for optimal turning. The DC93 is available with a standard clevis hitch. Simplified drivelines ensure consistent power transfer.
| Model | Cutting Width | PTO HP Required |
|---|---|---|
| DC93 | 9' 2" | 65-80 HP |
| DC103 | 10' 4" | 65-80 HP |
Superior Conditioning
Case IH disc mower conditioners offer conditioning options to suit various crops and conditions:
- Rubber on Rubber: Ideal for leafy crops, providing full-stem crimping and cracking while protecting leaves. Constructed with high-wear rubber.
- Steel on Steel: Chevron steel rolls offer durability in abrasive or rocky conditions, with an 11-flute pattern for aggressive full-stem crimping, beneficial for cane-type crops and high-volume grasses.
- Flail Conditioning: Provides a scuffing action on the stem for faster drydown in grass. The semi-swinging design ensures optimal crop release for fast-drying, uniform windrows.
Easy Adjustments: Features include tool-free adjustments for windrow formation (swathgate and shields), conditioning roll pressure (single-point adjustment), and cutting height (pin repositioning).
Modular Cutterbar System
Case IH's modular cutterbar system, used across their disc mowers and conditioners, offers several advantages:
- Modular Design: Independent modules prevent free-flowing oil, simplifying serviceability and maintenance. Superior hillside lubrication enhances performance.
- Shock Hub Protection: External shear hubs protect each module from severe impacts, allowing for fast and convenient repairs without opening the module.
- Quick-Change Knife System: Allows for rapid blade replacement, with scrapers preventing debris buildup.
- Adjustable Ground Pressure: Coil springs allow for easy adjustment of ground pressure to match field conditions.
- Constant Velocity Joint: Standard on the TD103, the primary PTO uses a CV joint for tight turns, reduced noise, and extended service life. Tractor tire bumpers protect the driveline.
- Reliability: Features shock protection, drive hubs protecting discs from internal gear damage, and a three-year cutterbar warranty.
Sickle Mower Conditioner (SC101)
The SC101 sickle mower conditioner delivers fast cutting and high-quality conditioning. It can be fitted with an HDX 2 series sicklebar header for self-propelled capacity at a pull-type price. Available in 14', 16', and 18' cutting widths. Features include a center-pivot design with hydraulic tongue swing and 1,000 RPM hydrostatic drive. Conditioning roll options include Rubber on Rubber and Steel on Steel.
| Feature | SC101 |
|---|---|
| Cutting Width | 14', 16', 18' |
| Swath Width | 96" |
| Windrow Width | 38"-60" |
| PTO HP Required | 70 HP |
Raking
Case IH wheel rakes are built for high capacities, featuring quick, simple adjustments and heavy-duty construction for season-after-season durability.
Wheel Rakes (WR102/WR201/WR302)
These wheel rakes handle high capacities with durable, heavy-duty frames designed for tough, uneven terrain. They offer generous rake arm clearance and floating rake sections for smooth operation. Transportation is effortless, with rakes folding on top of the cart. Adjustments for raking beam angle (loose or tight windrows) and windrow width (hydraulic option on WR302) are user-friendly. An optional single-side-opening kit is available for WR201 and WR302 models, and the WR102 allows for single-side operation in tight spaces.
| Model | Rake Type | Working Width | Rake Wheels | PTO HP Required |
|---|---|---|---|---|
| WR102 | Carted and Folding V | 16.4"-31" | 8, 10, or 12 | 30-40 HP |
| WR201 | Carted and Folding V | 16.4"-31" | 8 or 10 | 30-40 HP |
| WR302 | Carted and Folding V | 16.4"-31" | 12, 14, or 16 | 30-40 HP |
Baling
Case IH balers are renowned for producing great bale density, offering efficiency and productivity. Choose from round balers, small square balers, or commercial small square balers to suit your operation.
Round Balers (RB6 HD Pro Series)
The RB6 HD Pro series balers are engineered for high annual bale counts and the demands of wet and heavy silage. They offer high-capacity performance and speed, with fewer moving parts for lower maintenance. Features include extra-wide, heavy-duty pickups, a choice of cutting systems (medium 13-knife, fine 25-knife rotor, or rotor feeder), and an active drop floor to prevent plugs. Automatic chain oiling and convenient grease banks are standard. The heavy-duty drivetrain includes a main gearbox and a cut-out clutch for superior overload protection. Bale formation uses endless belts with a dual roll drive system for improved power transfer. In-cab bale density control allows for precise core and outer portion adjustments. The new user interface is intuitive, with field settings for tracking bale information.
| Model | Bale Width | Bale Diameter | Bale Weight | PTO HP Required |
|---|---|---|---|---|
| RB456HD Pro | 47.25" | 36"-75" | Up to 2,280 lb. | 100 HP |
| RB466HD Pro | 75" | 36"-75" | Up to 2,500 lb. | 120 HP |
Round Balers (RB5 Series)
The RB5 series round balers are built for the toughest crop types and conditions, providing superior bale shape and density. They offer flexibility to bale wet or dry crops efficiently. Features include wide pickups, high-capacity feeding systems, and durable belts and rolls. Maintenance is simplified with tool-free adjustable gauge wheels and swing-open access panels. Models include the RB455 (hay, silage, rotor cutter, rotor feeder), RB465 (low-profile pickup), RB565 Premium, and RB565 Premium HD (rugged design for silage). The heavy-duty pickup, premium laced and endless belts, and a reliable net wrap system contribute to durable performance. The main driveline is protected by a heavy-duty, high-torque cutout clutch.
| Model | Bale Width | Bale Diameter | Bale Weight | PTO HP Required |
|---|---|---|---|---|
| RB455 | 46.5"-61.5" | 36"-72" | 300-2,500 lb. | 45-105 HP |
| RB465 | 46.5"-61.5" | 36"-72" | 400-2,200 lb. | 70-105 HP |
| RB565 Premium | 61.5" | 36"-72" | 500-2,500 lb. | 90-105 HP |
| RB565 Premium HD | 61.5" | 36"-72" | 500-2,500 lb. | 90-105 HP |
Feeding Systems: Overshot (hay/silage) and Undershot (rotor models) feeders are available. The optional crop processor maximizes feed quality in corn silage.
On-Board Moisture Sensor Option: Provides real-time moisture data (7% to 60%) displayed on the baler monitor.
Rotor-Cutter System: Offers integrated, high-capacity rotary feeding with a 15-knife chopping system for processed bales. Knives are individually spring-protected.
Easily Adjustable Gauge Wheels: Tool-free adjustment for straight or castering options.
Heavy-Duty Cut-Out Clutch: Protects the baler driveline by automatically disengaging during blockages.
Utility Round Balers (RB456A)
The RB456A utility round baler is designed for rural lifestyle ranchers and small farmers, offering value-added features from the RB5 series. It provides affordable, reliable baling with big baler benefits. Features include a 30% wider pickup (60-1/2 inch tine-to-tine), a reciprocating stuffer for full chamber width feeding, and an optional hydraulic pickup lift. Bale formation uses six belts for crop control and density, with a proven roll and belt combination for excellent bale shape. The wrapping system is upgraded from the RB5 series, offering easy adjustments for net spreading. Options include twine only, net only, or a net and twine combination. A new moisture sensor option provides real-time data.
| Model | Bale Width | Bale Diameter | Bale Weight | PTO HP Required |
|---|---|---|---|---|
| RB456A | 46.5" | 36"-60" | 300-1,000 lb. | 45 HP |
Round Balers Additional Features
Belts Built to Last: Premium Laced Belts (durability, flexibility, Mato® fasteners) and Endless Belts (better tracking, no splices, sealed edges, three-year/15,000-bale warranty) are available.
In-Cab Controls: Monitor baler functions via easy-to-use monitors.
Tractor and Baler Automation: When paired with compatible Case IH tractors (Puma®, Maxxum®, Vestrum® with CVXDrive™, PowerDrive, or ActiveDrive 8), ISOBUS Class 3 controls automate tractor stopping, net film application, and bale ejection.
Monitors: Deluxe Monitor with Keypad (compact, black-and-white display, user-friendly icons) and Advanced Farming Systems (AFS) Pro 700 Monitor (color touch-screen, ISOBUS connectivity) are available.
Small Square Balers (SB531/SB541)
Case IH small square balers produce top-quality bales efficiently and reliably. They feature sturdy tines, adjustable pickup gauge wheels, and high-capacity features like wide pickups and heavy-duty rotary feeding systems. Sturdy, curved finger tines gently lift crop while keeping leaves intact. Knotters are gear-driven for durability and consistent tying, with hard-surface material at wear points and chrome-plated bill hooks. The SB541 is also available with a gear-driven wire twister.
| Model | Bale Cross Section | Plunger Speed | Pickup # of Tines | PTO HP Required |
|---|---|---|---|---|
| SB531 | 14"x18" | 93 spm | 110-156 | 62-75 HP |
| SB541 | 14"x18" | 93 spm | 110-156 | 62-75 HP |
Commercial Small Square Baler (SB541C)
The SB541C offers professional-grade performance for commercial operations, providing superior bale density and shape. It features larger wheels and tires for a smoother ride and less soil compaction. The enhanced bale case is 12 inches longer and 19% thicker than the SB541 for increased crop control and durability. Hydraulic tension rails provide four-way tension for heavier, denser bales. A larger, 8-ball twine box improves efficiency by allowing longer operation between twine ball changes. Additional heavy-duty features include hardened plunger rails, hydraulic pickup lift, hydraulic tongue swing, and cast iron wedges.
| Model | Bale Cross Section | Plunger Speed | Pickup # of Tines | PTO HP Required |
|---|---|---|---|---|
| SB541C | 14"x18" | 93 spm | 156 | 75 HP |
Small Square Balers Additional Features
High Capacity Feeding: A large 283-square-inch feed opening accommodates large, uneven windrows. Extra wide 75-inch pickups on SB541 and SB541C devour heavy windrows.
High-Quality Feeding System: Heavy-duty, double-rotating tines overlap for smooth, continuous feeding. Adjustable double-packer fork and a no-plug feeding system minimize shatter loss.
Bale Chute Options: Quarter-Turn Bale Chute and Triple-Purpose Bale Chute are available for efficient bale dropping and wagon loading.
Easy Bale-Density Control: Manual density control via tension springs or hydraulic bale tension (standard on SB541C) ensures consistent bale weight and density.
Dependable Gear-Driven Twine Knotters: Feature hard-surface material at wear points and chrome-plated bill hooks for durability and reduced maintenance.
Bale Thrower: Smooth, reliable hydraulic drive throws bales up to 38 inches long and 70 pounds, operated from the tractor seat.
Harvesting
Pull-Type Forage Harvester (FHX300)
The Case IH FHX300 pull-type forage harvester is designed for swift harvesting with a 1,000 RPM driveline, heavy-duty components, and wide crop heads for high-capacity performance. It features a 25.5-inch throat opening and 12 hardened-alloy knives for uniform length of cut. A powerful 1,000-RPM blower quickly fills wagons. The optional crop processor maximizes feed quality in corn silage, improving fermentation and digestibility. Remote controls allow for spout rotation and basic pickup functions. Heavy-duty gauge wheels and a floating auger ensure efficient operation in varied terrain.
| Feature | FHX300 |
|---|---|
| PTO HP Required | 180 HP |
| Windrow Pickup | 92" |
| Cornhead | 3-row 28-32" |
| Crop Processor | Optional |
| Length of Cut | 3/16" to 1 1/2" |
Bale Handling Attachments
Move round and square bales safely and efficiently with Case IH bale spears, bale forks, and grips. Compatible loaders include L300A, L505, L600, and L10 Series Loaders.
- Bale Spear: Ideal for round bales, with a long center tine and two shorter lower tines for control.
- Combo Bale/Pallet Fork: Versatile for both round and square bales.
- Heavy-Duty Bale Split: Rolls under the bale for easy splitting into two pieces.
- Pallet Fork Bale Spear: Similar to the bale spear, with a longer tine and a shorter tine to prevent rotation.
- Standard Square Bale Fork: Robust implement for both round and square bales.
- Heavy-Duty Bale Grip: For smaller square bales, with arms distributing pressure evenly.
- Heavy-Duty Round or Square Bale Grip: Stable sliding plates with lockable arms for stacking.
- Standard Round Bale Grip: Lockable arms for tight stacking and easy reversal.
- Pallet Fork: Provides maximum visibility for optimal fork placement, suitable for various materials.
Hay Essentials
Enhance your haymaking process with essential supplies from Case IH.
Twine
Case IH plastic twine, made in the USA, is the industry standard for quality, offering tight, consistent bales with uniform diameter and strength. It is nontoxic and UV-stabilized. Balekeeper Plastic Twine offers similar performance for value-conscious operators. Sisal Twine is 100% biodegradable and mildew-resistant.
- Plastic Baling Twine: Uniform diameter and strength, guaranteed knot and tensile strengths, nontoxic, UV-stabilized, multiple colors.
- Balekeeper Plastic Twine: Value-conscious option with popular strengths and lengths.
- Sisal Twine: Biodegradable, uniform thickness, mildew-resistant, consistent strength.
Net Wrap
Net-wrapped bales are smooth, weather-resistant, easier to move, and retain more leaves for higher-quality hay. Case IH net wraps provide superior coverage and protection.
- FASTNET™ Black Net Film: Keeps its shape, binds bales end-to-end for weather resistance, sheds water quickly, resists punctures and tears.
- Knitted Net Film: Made in the USA, light, cost-effective, available in white and green, durable, UV-stabilized, with a red end-of-roll warning stripe.
- Balekeeper™ Net Film: Value-conscious option available in popular widths and lengths.
Silage Film
Case IH silage film provides economical, virtually spoilage-free bales by eliminating costly silo and bunker storage. It offers high-puncture resistance, precise thickness control, high stretch ability for tight wraps, and high-cling properties. Silage Repair Tape is available for repairing silage film, offering high UV and water resistance.
- Silage Film: High-puncture resistance, precise thickness control, high stretch ability, high-cling properties.
- Silage Repair Tape: Strong, white polyethylene tape with high UV and water resistance.
Specifications
Detailed specifications for various Case IH hay and forage equipment models are provided below.
Mounted Disc Mowers Specifications
| Feature | MD73 | MD83 | MD93 |
|---|---|---|---|
| Cutting Width | 6 ft. 8 in. (2040 mm) | 7 ft. 10 in. (2400 mm) | 9 ft. 2 in. (2800 mm) |
| Cutting Height | .95-3.25 in. (24-82.5 mm) | .95-3.25 in. (24-82.5 mm) | .95-3.25 in. (24-82.5 mm) |
| Cutterbar Tilt Angle | +18°--32° | +18°--30° | +18°--28° |
| Cutterbar Operating Range | 0°-10° | 0°-10° | 0°-10° |
| Breakaway Angle | 19° | 19° | 19° |
| Type Cutterbar | Modular | Modular | Modular |
| Number of Discs | 6 | 7 | 8 |
| Knives Per Disc | 2-reversible, swingaway | 2-reversible, swingaway | 2-reversible, swingaway |
| Disc Cutting Diameter | 19.7 in. (500 mm) | 19.7 in. (500 mm) | 19.7 in. (500 mm) |
| Disc Drive | Bevel gears in sealed modules | Bevel gears in sealed modules | Bevel gears in sealed modules |
| Disc Speed | 3,000 RPM | 3,000 RPM | 3,000 RPM |
| Cutterbar Shear Protection | Std.- Frangible splines in disc drive hub | Std.- Frangible splines in disc drive hub | Std.- Frangible splines in disc drive hub |
| Swath Width Standard | 94 in. (2388 mm) | 110 in. (2794 mm) | 110 in. (2794 mm) |
| Driveline Protection | Belt drive to cutterbar | Belt drive to cutterbar | Belt drive to cutterbar |
| Overrunning Clutch | On PTO shaft | On PTO shaft | On PTO shaft |
| Belt Tension | Spring-loaded tensioner with adjustment gauge | Spring-loaded tensioner with adjustment gauge | Spring-loaded tensioner with adjustment gauge |
| Minimum PTO HP Required | 35-60 HP | 45 HP | 55 HP |
| PTO Speed | 540 | 540 | 540 |
| PTO Splines/Diameter | 6-spline/1.375 in. (35 mm) | 6-spline/1.375 in. (35 mm) | 6-spline/1.375 in. (35 mm) |
| Hydraulic Circuits Required | 1 remote | 1 remote | 1 remote |
| Minimum Relief Pressure Required | 1,500 psi (104 bar) | 1,500 psi (104 bar) | 1,500 psi (104 bar) |
| 3-Point Hitch Category | 2 | 2 | 2 |
| Overall Width | 98 in. (2489 mm)* | 119.5 in. (3035 mm)** | 138.75 in. (3 524 mm) |
| Overall Length | 141 in. (3581 mm)** | 181.75 in. (4616 mm)** | 160.25 in. (4070 mm) |
| Height - Transport Position | 50.5 in. (1283 mm) | 50.5 in. (1283 mm) | 42.5 in. (1080 mm) |
| Operating Weight | 1,300 lb. (590 kg) | 1,460 lb. (662 kg) | 1,590 lb. (721 kg) |
Pull-Type Disc Mower Specifications
| Feature | TD103 |
|---|---|
| Cutting Width | 10 ft. 4 in. (3.15 m) |
| Cutting Height | .95-3.2 in. (24-81 mm) |
| Cutting Height with Optional High-Stubble Shoes | 2.25-4.5 in. (58-115 mm) |
| Type Cutterbar | Modular |
| Number of Discs/Knives Per Disc | 8/2 |
| Disc Speed @ Rated PTO Speed | 2,835 RPM |
| Cutterbar Shear Protection | Standard - Frangible splines in disc drive hub |
| Cutterbar Flotation | Vertical and lateral, adjustable springs |
| Swath Width | 95 in. (2.4 m) |
| Input Speed | 540 RPM |
| Driveline Protection | Slip clutch and overrunning clutch assembly @ rear of PTO shaft |
| Minimum PTO HP Required | 60 |
| PTO Splines/Diameter | 6-Splines/1.375 in. (35 mm) |
| Tires | 27x9.5-15 6PR |
| Max. Transport Speed | 20 mph (32.2 kph) |
| Hydraulic Circuits Required | 2 |
| Minimum Relief Pressure Required | 1,500 psi (103 bar) |
| Drawbar Requirements - ASAE | ASAE Category 2 drawbar |
| Transport Width | 10 ft. 10 in. (3.3 m)* |
| Overall Width | 16 ft. 4 in. (4.9 m) |
| Transport Length | 15 ft. 8 in. (4.8 m) |
| Operating Length | 15 ft. 3 in. (4.6 m) |
| Transport Height | 62 in. (1.6 m) |
| Ground Clearance w/ Header Fully Raised | 11 in. (279 mm) |
| Operating Weight | 2,610 lb. (1186 kg) |
Disc Mower Conditioner Specifications
| Model | DC105 | DC125 | DC135 (ROLL) | DC135 (FLAIL) | DC165 (ROLL) |
|---|---|---|---|---|---|
| Cutting Width | 10 ft. 1 in. (3072 mm) | 11 ft. 7 in. (3537) | 156 in. (4.0 m) | 156 in. (4.0 m) | 192 in. (4.9 m) |
| Cutting Height | 0.79 – 2.7 in. (20 – 69 mm) | 0.79 – 2.7 in. (20 – 69 mm) | 0.79 – 2.7 in. (20 – 69 mm) | 0.79 – 2.7 in. (20 – 69 mm) | 0.79 – 2.7 in. (20 – 69 mm) |
| Cutting Height w/ Optional High-Stubble Shoes | 3.1–5.5 in. (79 –140 mm) | 3.1–5.5 in. (79 –140 mm) | 3.1–5.5 in. (79 –140 mm) | 3.1–5.5 in. (79 –140 mm) | 3.1–5.5 in. (79 –140 mm) |
| Cutterbar | Modular | Modular | Modular | Modular | Modular |
| Number of Discs/ Knives | 6 / 2 | 7 / 2 | 8 / 2 | 8 / 2 | 10 / 2 |
| Disc Speed at 1,000 PTO | 2,250 RPM | 2,250 RPM | 2,250 RPM | 2,250 RPM | 2,250 RPM |
| Module Protection | Shock hub system | Shock hub system | Shock hub system | Shock hub system | Shock hub system |
| Cutterbar Tilt Angle | 2 –10º | 2 –10º | 2 –10º | 2 –10º | 2 –10º |
| Cutterbar Tilt System | 4-position hydraulic cylinder | 4-position hydraulic cylinder | 4-position hydraulic cylinder | 4-position hydraulic cylinder | 4-position hydraulic cylinder |
| Cutterbar Shear Protection | Standard–frangible splines in disc drive hub | Standard–frangible splines in disc drive hub | Standard–frangible splines in disc drive hub | Standard–frangible splines in disc drive hub | Standard–frangible splines in disc drive hub |
| Cutterbar Flotation | Vertical and lateral, adjustable springs | Vertical and lateral, adjustable springs | Vertical and lateral, adjustable springs | Vertical and lateral, adjustable springs | Vertical and lateral, adjustable springs |
| Type Conditioning | Chevron intermeshing molded rubber | Chevron intermeshing molded rubber or steel rolls | Flail rotor w/ 120 tapered flails | Chevron intermeshing molded rubber or steel rolls | Chevron intermeshing molded rubber or steel rolls |
| Length / Diameter | 90 in. (2286 mm)/ 10.4 in. (264 mm) | 102 in. (2591 mm)/ 10.4 in. (264 mm) | 125 in. (3175 mm)/ 10.4 in. (264 mm) | 125 in. (3175 mm)/ 10.4 in. (264 mm) | 125 in. (3175 mm)/ 10.4 in. (264 mm) |
| Roll Drive | 4 HB V-belt & enclosed gears | 4 HB V-belt | 4 HB V-belt & enclosed gears | 4 HB V-belt & enclosed gears | 4 HB V-belt & enclosed gears |
| Roll Speed | 640 / 750 RPM | 750 / 640 RPM | 1,042 / 752 RPM | 750 / 640 RPM | 750 / 640 RPM |
| Roll Tension Adjustment | Single crank | N/A | Single crank | Single crank | Single crank |
| Conditioner Gap Adjustment | Single crank adjustment of rotor hood | Drawbolt stop, each end | Single crank adjustment of rotor hood | Single crank adjustment of rotor hood | Single crank adjustment of rotor hood |
| Swath Width | 6 ft. (1.8 m) | 7 ft. (2.1 m) | 10 ft. (3 m) | 10 ft. (3 m) | 12 ft. (3.7 m) |
| Windrow Width | 3 – 8 ft. (0.9 – 2.4 m) | 3 – 8 ft. (0.9 – 2.4 m) | 3 – 8 ft. (0.9 – 2.4 m) | 3 – 8 ft. (0.9 – 2.4 m) | 3 – 8 ft. (0.9 – 2.4 m) |
| Input Speed | 540 RPM or 1,000 RPM | 1,000 RPM | 1,000 RPM | 1,000 RPM | 1,000 RPM |
| Driveline Protection | Slip clutch and overrunning clutch assembly @ rear of PTO shaft | Slip clutch and overrunning clutch assembly @ rear of PTO shaft | Slip clutch and overrunning clutch assembly @ rear of PTO shaft | Slip clutch and overrunning clutch assembly @ rear of PTO shaft | Slip clutch and overrunning clutch assembly @ rear of PTO shaft |
| Hitch Options | Drawbar swivel or 2-pt. swivel | Drawbar swivel or 2-pt. swivel | Drawbar swivel or 2-pt. swivel | Drawbar swivel or 2-pt. swivel | Drawbar swivel or 2-pt. swivel |
| Minimum PTO HP Required | 80 | 85 | 90 | 100 | 100 |
| PTO Shaft Spline/ Size Requirements | 6-spline/ 1 3/8 or 21-spline/ 1 3/8 | 21-spline/ 1 3/8 | 21-spline/ 1 3/8 | 21-spline/ 1 3/8 | 21-spline/ 1 3/8 |
| Hydraulic Remotes Required | 2 | 2 | 2 | 2 | 2 |
| Minimum Relief Pressure | 1,500 psi (103 bar) | 1,500 psi (103 bar) | 1,500 psi (103 bar) | 1,500 psi (103 bar) | 1,500 psi (103 bar) |
| Drawbar/ Swivel Hitch | ASAE Cat. 2 or 3 drawbar or Cat. 3 3-pt. hitch | ASAE Cat. 2 or 3 drawbar or Cat. 3 3-pt. hitch | ASAE Cat. 2 or 3 drawbar or Cat. 3 3-pt. hitch | ASAE Cat. 2 or 3 drawbar or Cat. 3 3-pt. hitch | ASAE Cat. 2 or 3 drawbar or Cat. 3 3-pt. hitch |
| Electrical | 7-pin electrical connector for transport lights | 7-pin electrical connector for transport lights | 7-pin electrical connector for transport lights | 7-pin electrical connector for transport lights | 7-pin electrical connector for transport lights |
| Operating Length | 22 ft. 8 in. (6.9 m) w/ drawbar hitch | 26 ft. 5 in. (8.1 m) w/ drawbar hitch | 31 ft. (9.4 m) w/ drawbar hitch | 31 ft. (9.4 m) w/ drawbar hitch | 31 ft. (9.4 m) w/ drawbar hitch |
| Operating Height | 6 ft. 7 in (2.0 m) | 6 ft. 7 in (2.0 m) | 6 ft. 7 in (2.0 m) | 6 ft. 7 in (2.0 m) | 6 ft. 7 in (2.0 m) |
| Transport Width | 10 ft. 1 in. (3072 mm) | 11 ft. 7 in. (3537 mm) | 13 ft. 4 in. (4.1 m) | 13 ft. 4 in. (4.1 m) | 16 ft. 7 in. (5.1 m) |
| Transport Height | 7 ft. 5 in. (2.26 m) | 7 ft. 5 in. (2.26 m) | 7 ft. 5 in. (2.26 m) | 7 ft. 5 in. (2.26 m) | 7 ft. 5 in. (2.26 m) |
| Transport Speed (mph /kph) | 20 mph (32) | 20 mph (32) | 20 mph (32) | 20 mph (32) | 20 mph (32) |
| Ground Clearance When Fully Raised | 16.2 in. (411 mm) | 16.2 in. (411 mm) | 16.2 in. (411 mm) | 16.2 in. (411 mm) | 16.2 in. (411 mm) |
| Operating Weight | 5,760 lb. (2613 kg) | 5,880 lb. (2667 kg) | 6,255 lb. (2837 kg) | 5,660 lb. (2567 kg) | 6,980 lb. (3166 kg) |
Side-Pull Disc Mower Conditioner Specifications
| Model | DC93 (ROLL) | DC93 (FLAIL) | DC103 (ROLL) | DC103 (FLAIL) |
|---|---|---|---|---|
| Cutting Width | 9 ft. 2 in. (2.8 m) | 9 ft. 2 in. (2.8 m) | 10 ft. 4 in. (3.16 m) | 10 ft. 4 in. (3.16 m) |
| Cutting Height | 1.1 – 2.7 in. (29 – 68 mm) | 1.1 – 2.7 in. (29 – 68 mm) | 0.95 –2.4 in. (24 – 60 mm) | 1.1. – 2.7 in. (29–68 mm) |
| Cutting Height w/ Optional High-Stubble Shoes | 2.25 – 4.5 in. (58 – 115 mm) | 2.25 – 4.5 in. (58 – 115 mm) | 2.25–4.5 in. (58–115 mm) | 2.25–4.5 in. (58–115 mm) |
| Cutterbar | Modular | Modular | Modular | Modular |
| Number of Discs/ Knives | 7 / 2 | 7 / 2 | 8 / 2 | 8 / 2 |
| Disc Speed at 540 PTO | 3000 RPM* | 3000 RPM* | 3000 RPM* | 3000 RPM* |
| Module Protection | Shock hub system | Shock hub system | Shock hub system | Shock hub system |
| Cutterbar Tilt Angle | 2 – 10° | 2 – 10° | 2 – 10° | 2 – 10° |
| Cutterbar Tilt System | 4-position hydraulic cylinder | 4-position hydraulic cylinder | 4-position hydraulic cylinder | 4-position hydraulic cylinder |
| Cutterbar Shear Protection | 3,000 RPM | 3,000 RPM | 3,000 RPM | 3,000 RPM |
| Cutterbar Flotation | Vertical and lateral, adjustable springs | Vertical and lateral, adjustable springs | Vertical and lateral, adjustable springs | Vertical and lateral, adjustable springs |
| Type Conditioning | Chevron rubber rolls | Rotor with 90 tapered flails | Chevron rubber or steel rolls | Rotor with 100 tapered flails |
| Length | 90 in. (2286 mm) | 90 in. (2286 mm) | 102 in. (2591 mm) | 102 in. (2591 mm) |
| Diameter | 10.4 in. (264 mm) | 10.4 in. (264 mm) | 10.4 in. (264 mm) | 10.4 in. (264 mm) |
| Roll Drive | 4 HB V-belt and enclosed gear | 4 HB V-belt | 4 HB V-belt and enclosed gear | 4 HB V-belt |
| Roll Speed | 647 RPM | 647 RPM | 718 RPM standard / 1000 optional | 718 RPM standard / 1000 optional |
| Adjustments | Hand crank; No tools required | Single point hand crank rotor hood; no tools needed | Hand crank; No tools required | Single point hand crank rotor hood; no tools needed |
| Swath Width | 6 ft. (1.83 m) | 6 ft. (1.83 m) | 7 ft. (2.13 m) | 7 ft. (2.13 m) |
| Windrow Width | 3 – 6 ft. (0.9 – 1.83 m) | 3 – 6 ft. (0.9 – 1.83 m) | 3 – 7 ft. (0.9 –2.13 m) | 3 – 7 ft. (0.9 –2.13 m) |
| Input Speed | 540 RPM | 540 RPM | 540 or 1000 RPM standard hitch / 540 only with swivel hitch option | 540 or 1000 RPM standard hitch / 540 only with swivel hitch option |
| Driveline Protection | Slip clutch and overrunning clutch assembly at rear of PTO shaft | Slip clutch and overrunning clutch assembly at rear of PTO shaft | Slip clutch and overrunning clutch assembly at rear of PTO shaft | Slip clutch and overrunning clutch assembly at rear of PTO shaft |
| Tongue Style | Straight tongue | Straight tongue | Curved tongue | Curved tongue |
| Hitch Options | Standard clevis | Standard clevis | Clevis, drawbar swivel or 2-pt. swivel | Clevis, drawbar swivel or 2-pt. swivel |
| Minimum PTO HP Required | 65 | 65 | 80 | 80 |
| PTO Shaft Spline/ Size Requirements | 540, 1.375 in. 6-spline | 540, 1.375 in. 6-spline | 540, 1.375 in. 6-spline or 1000, 1.375 in. 21-spline | 540, 1.375 in. 6-spline or 1000, 1.375 in. 21-spline |
| Hydraulic Remotes Required | 2 | 2 | 2 | 2 |
| Minimum Relief Pressure | 1500 psi | 1500 psi | 1500 psi | 1500 psi |
| Drawbar/ Swivel Hitch | ASAE Cat 2 / N/A /N/A | ASAE Cat 2 / N/A /N/A | ASAE Cat 2 / ASAE Cat 2 or 3 / ASAE Cat 2, 3-N or 3 | ASAE Cat 2 / ASAE Cat 2 or 3 / ASAE Cat 2, 3-N or 3 |
| Electrical | 7-pin electrical connector for transport lights | 7-pin electrical connector for transport lights | 7-pin electrical connector for transport lights | 7-pin electrical connector for transport lights |
| Operating Width (Standard) | 14 ft. 10 in. (4.52 m) | 14 ft. 10 in. (4.52 m) | 16 ft. (4.87 m)/ 17 ft. 7 in. (5.36 m) with swivel hitch | 16 ft. (4.87 m)/ 17 ft. 7 in. (5.36 m) with swivel hitch |
| Operating Length | 17 ft. 2 in. (5.23 m)*** | 17 ft. 8 in. (5.4 m)*** | 15 ft. 7 in. (4.75 m)*** | 17 ft. 8 in. (5.4 m)*** |
| Operating Height | 4 ft. 5 in. (1.35 m) | 4 ft. 5 in. (1.35 m) | 4 ft. 5 in. (1.35 m) | 4 ft. 5 in. (1.35 m) |
| Transport Width | 9 ft. 11 in. (3.02 m) | 9 ft. 11 in. (3.02 m) | 11 ft. 3 in. (3.42 m) | 11 ft. 3 in. (3.42 m) |
| Transport Height | 5 ft. 8 in. (1.73 m) | 5 ft. 8 in. (1.73 m) | 5 ft. 3 in. (1.6 m) | 5 ft. 3 in. (1.6 m) |
| Transport Speed (mph/kph) | 18 mph (32) | 18 mph (32) | 19 mph (32) | 19 mph (32) |
| Ground Clearance When Fully Raised | 17 in. (432 mm) | 17 in. (432 mm) | 17 in. (432 mm) | 17 in. (432 mm) |
| Operating Weight | 3,740 lb. (1697 kg)*** | 3,690 lb. (1674 kg)*** | 4,160 lb. (1891 kg)*** | 4,100 lb. (1864 kg)*** |
Sickle Mower Conditioner Specifications
| Model | SC101 W/14 FT. HEADER | SC101 W/16 FT. HEADER | SC101 W/18 FT. HEADER |
|---|---|---|---|
| CROP DISCHARGE | Hydraulic | Hydraulic | Hydraulic |
| Swath Width | 96 in. (2438 mm) | 96 in. (2438 mm) | 96 in. (2438 mm) |
| Windrow Width | 38-60 in. (965-1524 mm) | 38-60 in. (965-1524 mm) | 38-60 in. (965-1524 mm) |
| Adjustments | Swath gate adjusted lowered provides 96 in. swath. Swath gate raised allows adjustable windrow shields to produce windrow widths between 38 in. and 60 in. | Swath gate adjusted lowered provides 96 in. swath. Swath gate raised allows adjustable windrow shields to produce windrow widths between 38 in. and 60 in. | Swath gate adjusted lowered provides 96 in. swath. Swath gate raised allows adjustable windrow shields to produce windrow widths between 38 in. and 60 in. |
| Minimum PTO HP Required | 60 | 60 | 60 |
| Hydraulic Remotes Required | 2 | 2 | 2 |
| Relief Pressure | 1,750 psi (121 bar) | 1,750 psi (121 bar) | 1,750 psi (121 bar) |
| Minimum Drawbar | Category 2 | Category 2 | Category 2 |
| 7-pin Electrical Connector | Required for lighting | Required for lighting | Required for lighting |
| Hitch Type | Swivel ball in standard hitch extension w/ clevis on implement tongue | Swivel ball in standard hitch extension w/ clevis on implement tongue | Swivel ball in standard hitch extension w/ clevis on implement tongue |
| Swing Circuit | Double-acting, 3 in. (76.2 mm) bore x 19 in. (482.6 mm) stroke | Double-acting, 3 in. (76.2 mm) bore x 19 in. (482.6 mm) stroke | Double-acting, 3 in. (76.2 mm) bore x 19 in. (482.6 mm) stroke |
| Raise/Lower Circuit | Single-acting, Master/Slave, 2.5 in. (63.5 mm) bore x 10 in. (254 mm) stroke | Single-acting, Master/Slave, 2.5 in. (63.5 mm) bore x 10 in. (254 mm) stroke | Single-acting, Master/Slave, 2.5 in. (63.5 mm) bore x 10 in. (254 mm) stroke |
| Tilt Circuit | Single-acting, 2 in. (50.8 mm) bore x 10 in. (254 mm) stroke | Single-acting, 2 in. (50.8 mm) bore x 10 in. (254 mm) stroke | Single-acting, 2 in. (50.8 mm) bore x 10 in. (254 mm) stroke |
| Pump Drive Speed | 1,000 RPM only | 1,000 RPM only | 1,000 RPM only |
| Pump Type | Fixed displacement, gear-type, w/ thrust bearing on input shaft | Fixed displacement, gear-type, w/ thrust bearing on input shaft | Fixed displacement, gear-type, w/ thrust bearing on input shaft |
| Pump Drive | Telescoping PTO, category 3 w/ standard u-joints | Telescoping PTO, category 3 w/ standard u-joints | Telescoping PTO, category 3 w/ standard u-joints |
| Pump Mount | Swivel mounted on 1.75 in. (44.5 mm) composite non-greaseable bushing w/ steering link attached to hitch extension | Swivel mounted on 1.75 in. (44.5 mm) composite non-greaseable bushing w/ steering link attached to hitch extension | Swivel mounted on 1.75 in. (44.5 mm) composite non-greaseable bushing w/ steering link attached to hitch extension |
| Flow @ Rated Speed | 29 gpm (110 lpm) | 29 gpm (110 lpm) | 29 gpm (110 lpm) |
| Relief Valve Setting | 3,300 psi (228 bar) | 3,300 psi (228 bar) | 3,300 psi (228 bar) |
| Motor Type | Fixed displacement, gear-type | Fixed displacement, gear-type | Fixed displacement, gear-type |
| Reservoir Capacity | 28 gal. (105 l) | 28 gal. (105 l) | 28 gal. (105 l) |
| Operating Speeds Field | 0-8 mph (0-13 kph) | 0-8 mph (0-13 kph) | 0-8 mph (0-13 kph) |
| Transport | 20 mph (32 kph) | 20 mph (32 kph) | 20 mph (32 kph) |
| Safety Features Lighting | Brake/Flasher/Turn signal lights-Standard | Brake/Flasher/Turn signal lights-Standard | Brake/Flasher/Turn signal lights-Standard |
| Transport Swing Lock | Standard mechanical stop w/ spring-loaded locking pin to facilitate ease of actuation | Standard mechanical stop w/ spring-loaded locking pin to facilitate ease of actuation | Standard mechanical stop w/ spring-loaded locking pin to facilitate ease of actuation |
| Transport Lift Lock | Standard mechanical lift cylinder stops | Standard mechanical lift cylinder stops | Standard mechanical lift cylinder stops |
| Safety Chain | Standard | Standard | Standard |
| Overall Length | 25 ft. 11 in. (7.90 m) | 25 ft. 11 in. (7.90 m) | 25 ft. 11 in. (7.90 m) |
| Operating Position | 73 in. (1854 mm) | 73 in. (1854 mm) | 73 in. (1854 mm) |
| Transport Position | 80 in. (2032 mm) | 80 in. (2032 mm) | 80 in. (2032 mm) |
| Track Width | 152 in. (3861 mm) | 152 in. (3861 mm) | 152 in. (3861 mm) |
| Ground Clearance to Guard Tips | 25 in. (635 mm) | 25 in. (635 mm) | 25 in. (635 mm) |
| Tires: Size, Ply Rating and Type | 31 x 13.50-15, 8 ply, 11, agricultural implement rib tire | 31 x 13.50-15, 8 ply, 11, agricultural implement rib tire | 31 x 13.50-15, 8 ply, 11, agricultural implement rib tire |
| Tires: Inflation Pressure | 30 psi (2.07 bar) | 30 psi (2.07 bar) | 30 psi (2.07 bar) |
| Operating: Less Header | 3,062 lb. (1389 kg) | 3,062 lb. (1389 kg) | 3,062 lb. (1389 kg) |
| Operating: Header w/ Steel Rolls | 7,062 lb. (3203 kg) | 7,062 lb. (3203 kg) | 7,062 lb. (3203 kg) |
| Twine Tie Weight | 7,978 lb. (3619 kg) | 7,978 lb. (3619 kg) | 7,978 lb. (3619 kg) |
| Wire Tie Weight | 3,208 lb. (1455 kg) | 3,208 lb. (1455 kg) | 3,208 lb. (1455 kg) |
Small Square Balers Specifications
| Model | SB531 | SB541 | SB541C |
|---|---|---|---|
| BALE SIZE Cross Section | 14"x18" (356×457mm) | 14"x18" (356×457mm) | 14"x18" (356×457mm) |
| Length | 12 to 52 in. (305 to 1321 mm) | 12 to 52 in. (305 to 1321 mm) | 12 to 52 in. (305 to 1321 mm) |
| Density Control (Std./Opt.) | Adj. spring loaded tension rails/Hydraulic density adj. | Adj. spring loaded tension rails/Hydraulic density adj. | Hydraulic tension rails |
| PICKUP Width Inside | 75 in. (1 905 mm) | 80 in. (2032 mm) | 75 in. (1 905 mm) |
| Width on Flare | 65 in. (1 651 mm) | 70 in. (1778 mm) | 70 in. (1778 mm) |
| Number of Teeth | 110 | 156 | 156 |
| Tine Bars | Five tooth bars | Six tooth bars | Six tooth bars |
| Protection | Twine knotter | Twine knotter | HD knotter |
| FEEDER Type | Rotary feeder with packer | Rotary feeder with packer | Rotary feeder with packer |
| Opening | 283 sq. in. (0.182 sq. m) | 283 sq. in. (0.182 sq. m) | 283 sq. in. (0.182 sq. m) |
| PLUNGER Speed | 93 spm | 93 spm | 93 spm |
| Stroke Length | 30 in. (762 mm) | 30 in. (762 mm) | 30 in. (762 mm) |
| TYING MECHANISM Type | Knotter or twister | Knotter or twister | HD knotter |
| Drive Mechanism | Gear and shaft | Gear and shaft | Gear and shaft |
| Protection | Shear bolt | Shear bolt | Shear bolt |
| Capacity (Twine/Wire) | 6 balls/N/A | 8 balls/4 coils | 8 balls/N/A |
| MAIN DRIVE Flywheel Diameter | 22 in. (559 mm) | 22 in. (559 mm) | 22 in. (559 mm) |
| Flywheel Weight | 248 lb. (112 kg) | 248 lb. (112 kg) | 248 lb. (112 kg) |
| PTO Driveline Protection | Std: 3 joint, category 6, with Power-Pivot bearing | Std: 3 joint, category 6, with Power-Pivot bearing | Std: 3 joint, category 6, with Power-Pivot bearing |
| Gearbox | Shear bolt, overrunning and slip clutches | Shear bolt, overrunning and slip clutches | Shear bolt, overrunning and slip clutches |
| TRACTOR REQUIREMENTS Minimum PTO HP Required | 62 | 62 | 75 |
| Tires Left/Right | 31x13.50-15, 6PR/27x9.50-15, 6PR | 31x13.50-15, 6PR/27x9.50-15, 6PR | 14Lx16.1, 6PR/11×14, 6PR |
| Twine Tie Weight | 3,094 lb. (1 403 kg) | 3,094 lb. (1 403 kg) | 3,715 lb. (1 685 kg) |
| Wire Tie Weight | 3,208 lb. (1 455 kg) | 3,208 lb. (1 455 kg) | N/A |
Round Balers Specifications
| Model | RB456A STANDARD | RB455 HAY | RB455 SILAGE | RB455 ROTOR CUTTER | RB455 ROTOR FEEDER |
|---|---|---|---|---|---|
| BALE SIZE Diameter | 36-60 in. (915-1524mm) | 36-72 in. (914-1829 mm) | 36-72 in. (914-1829 mm) | 36-72 in. (914-1829 mm) | 36-72 in. (914-1829 mm) |
| Width | 46.5 in. (1 182 mm) | 46.5 in. (1 181 mm) | 46.5 in. (1 181 mm) | 46.5 in. (1 181 mm) | 46.5 in. (1 181 mm) |
| Weight | Up to 1,000 lb. (454 kg) | 400-1,800 lb. (181-816 kg) | 400-1,800 lb. (181-816 kg) | 400-1,200 lb. (181-544 kg) | 400-1,800 lb. (181-816 kg) |
| Density Pressure Control | N/A | 1 spring & 1 cylinder; In-cab control standard | 1 spring & 1 cylinder; In-cab control standard | 1 spring & 1 cylinder; No option for in-cab control | 2 springs & 1 cylinder; In-cab control standard |
| PICKUP Standard Width, Tine to Tine | 44.6 in. (1133 mm) | 71 in. (1800 mm) | 71 in. (1800 mm) | 71 in. (1800 mm) | 71 in. (1800 mm) |
| Pickup Type | Direct feed | Overshot feeder | Overshot feeder | Undershot rotor | Overshot feeder |
| Pickup Protection | Breakaway chain | Radial pin clutch | Radial pin clutch | Radial pin clutch | Radial pin clutch |
| Gauge Wheels (Std./Opt.) | Single wheel on left, optional wheel on right | No-tools adjustable/No option | No-tools adjustable/No option | No-tools adjustable/No option | No-tools adjustable/No option |
| Tine Bars | 4 bar | 5 bar | 5 bar | 5 solid bars | 5 bar |
| Width, Tine to Tine | 44.7 in (113 cm) | 72 in. (180 cm) | 72 in. (180 cm) | 81.5 in. (207 cm) | 72 in. (180 cm) |
| Width, Flare to Flare | 68 in. (174 cm) | 80 in. (202 cm) | 80 in. (202 cm) | 90 in. (228.4 cm) | 80 in. (202 cm) |
| Tine Spacing | 12.4 in (31.5 cm) | 2.6 in. (7 cm) | 2.6 in. (7 cm) | 2.6 in. (7 cm) | 2.6 in. (7 cm) |
| Number of Tines | 112 steel coil tine | 160 rubber-mounted | 160 rubber-mounted | 160 rubber-mounted | 160 rubber-mounted |
| Reel Diameter | 13 (30.5 cm) | 12.5 in. (31.5 cm) | 12.5 in. (31.5 cm) | 12.5 in. (31.5 cm) | 12.5 in. (31.5 cm) |
| BELTS Type (Std./Opt.) | Standard-laced | Premium-laced/Endless | Premium-laced/Endless | Endless | Premium-laced/Endless |
| Number of Belts | 5 | 6 | 6 | 7 | 6 |
| Width | 7 in. (178 mm) | 7 in. (178 mm) | 7 in. (178 mm) | 7 in. (178 mm) | 7 in. (178 mm) |
| Length | 343 in. (8712 mm) | 421 in. (10693 mm) | 421 in. (10693 mm) | 421 in. (10693 mm) | 421 in. (10693 mm) |
| WRAPPING SYSTEM Net & Twine | Yes | Yes | Yes | Yes | Yes |
| Twine Only | No option | Twine Only | Twine Only | Twine Only | Twine Only |
| Net Only | Yes | Net Only | Net Only | Net Only | Net Only |
| Twine Application | Single twine arm w/ dual twine tubes | Dual twine arms | Dual twine arms | Dual twine arms | Dual twine arms |
| Twine Control | 4 active balls | 6 balls | 6 balls | 6 balls | 6 balls |
| Twine Box Capacity | Standard | Standard | Standard | Standard | Standard |
| Net System | Front feeding net wrap system | Front feeding net wrap system | Front feeding net wrap system | Front feeding net wrap system | Front feeding net wrap system |
| Net Control | Automatic w/ electric driver | Automatic w/ electric driver | Automatic w/ electric driver | Automatic w/ electric driver | Automatic w/ electric driver |
| Net Wrap Capacity | 1 active roll | 1 active roll + 2 rolls in storage | 1 active roll + 2 rolls in storage | 1 active roll + 2 rolls in storage | 1 active roll + 2 rolls in storage |
| BALE RAMP Type | Spring-loaded | Spring-loaded/Hydraulic | Spring-loaded/Hydraulic | Spring-loaded/Hydraulic | Spring-loaded/Hydraulic |
| TRACTOR REQUIREMENTS Minimum PTO HP Required | 40 | 60 | 65 | 100 | 85 |
| PTO Speed | 540 | 540/1,000 | 540 | 540/1,000 | 540/1,000 |
| PTO Protection | Shear bolt | Cut-out clutch | Cut-out clutch | Cut-out clutch | Cut-out clutch |
| Hydraulic Remote Required | 1 to 2 | 2 | 2 | 2-4 | 2-3 |
| DIMENSIONS & WEIGHTS* Overall Width | 85 in. (2162 mm) | 99 in. (2515 mm) | 120 in. (3048 mm) | 99 in. (2515 mm) | 120 in. (3048 mm)^ |
| Overall Length (Tailgate Closed) | 163 in. (4134 mm) | 175 in. (4445 mm) | 189 in. (4801 mm)^ | 188.6 in. (479 cm)^ | 188.6 in. (479 cm)^ |
| Overall Height (Tailgate Closed) | 100 in. (2534 mm) | 105 in. (2667 mm) | 112 in. (2845 mm) | 114 in. (2896 mm) | 114 in. (2896 mm)^ |
| Overall Height (Tailgate Open) | 146 in. (3709 mm) | 153 in. (3886 mm) | 161 in. (4089 mm) | 167 in. (4242 mm) | 167 in. (4242 mm)^ |
| Weight | 3,460 lb. (1569 kg) | 6,790 lb. (3080 kg) | 7,851 lb. (3561 kg) | 7,498 lb. (3401 kg) | 7,275 lb. (3300 kg) |
| Standard Baler Tire Size | 11Lx 14, 6 ply | 18L-16.1SL 10 PR | 18L-16.1SL 10 PR | 18L-16.1SL 10 PR | 18L-16.1SL 10 PR |
| Optional Baler Tire Size | 31×13.5-15 | 31x13.5-15 8 PR | 21.5Lx 16.1 10 PR or 31×13.5-15 8 PR | 21.5Lx 16.1 10 PR | 21.5L× 16.1 10 PR |
Round Balers RB6 HD Pro Series Specifications
| Model | RB456 HD PRO | RB466 HD PRO |
|---|---|---|
| POWER Type | Rotor Feeder / Rotor Cutter | Rotor Feeder / Rotor Cutter |
| BALE DIMENSIONS Diameter (Minimum/Maximum) | 36-65 in. (90-165 cm) | 36-75 in. (90-190 cm) |
| Width | 47.25 in. (120 cm) | 47.25 in. (120 cm) |
| TRACTOR REQUIREMENTS Minimum PTO Power (HP) | 100 | 120 |
| PTO Speed | 1,000 | 1,000 |
| Hydraulic Remotes Required | 2 | 2 |
| Main Drive | T Drive split gearbox | T Drive split gearbox |
| Protection | Cut-out clutch | Cut-out clutch |
| PICK-UP Standard Working Width | 90 in. (2.3 m) | 90 in. (2.3 m) |
| Outside Width Tine-to-Tine | 82 in. (2.07 m) | 82 in. (2.07 m) |
| Five Tine Bar Pick-Up with Rubber Tines | Standard | Standard |
| Roller Windguard | Standard | Standard |
| Flotation | Double adjustable spring | Double adjustable spring |
| Pick Up Protection | Radial pin clutch | Radial pin clutch |
| No Tools Adjust Pickup Gauge Wheels | Standard | Standard |
| No Tools Adjust Castering Pickup Gauge Wheels | Option | Option |
| Gauge Wheels (15/6.00 -6) | Standard | Standard |
| Feeding System | 13/25 | 13/25 |
| Active Drop Floor | Standard | Standard |
| Knives Options | 3.25 in. (83 mm)/1.6 in. (41 mm) | 3.25 in. (83 mm)/1.6 in. (41 mm) |
| Theoretical Cut Length | Standard | Standard |
| Knife Activation, In - Out | Hydraulic | Hydraulic |
| BALE FORMATION Type | Combination of rolls and belts | Combination of rolls and belts |
| Formation Rolls | Four 10.4 in. (273 mm) endless | Four 10.4 in. (273 mm) endless |
| Belts | 2 | 2 |
| Double Belt Drive | Standard | Standard |
| Bale Shape Indicators | Standard | Standard |
| Net Capacity | Once active plus two in storage | Once active plus two in storage |
| BALE DENSITY SYSTEM Dual Density System | Standard | Standard |
| Density Control | In-cab control through monitor | In-cab control through monitor |
| BALER ELECTRONICS Isobus Connection Ready | Standard | Standard |
| Pro 700 Monitor | Option | Option |
| Baler Automation System | Active with unlock code | Active with unlock code |
| Moisture Sensor | Option | Option |
| Maximum Traveling Speeds | 32 mph (50 kph) | 32 mph (50 kph) |
| Bale Ramp | Spring | Spring |
| BALER DIMENSIONS Length | 192 in. (4.87 m) | 192 in. (4.87 m) |
| Width on 500/55-20 Tires | 108 in. (2.74 m) | 108 in. (2.74 m) |
| Width on 620/40-22.5 Tires | 115 in. (2.91 m) | 115 in. (2.91 m) |
FORAGE EQUIPMENT Specifications
| Model | FHX300 FORAGE CHOPPER | HDX3R CORN HEADER | HDX20P PICKUP HEADER |
|---|---|---|---|
| Number/Type of Knives | 12 single edge hardened steel | N/A | N/A |
| Cutterhead, Type/Speed | Cylinder, 848 RPM | N/A | N/A |
| Cutterhead, Diameter | 21 in. (533.4 mm) | N/A | N/A |
| Throat Opening | 24 3/8 x 6 5/8 in. (619 × 167 mm) | N/A | N/A |
| Shearbar | Quick adjust, reversible, hard-faced on vertical and horizontal surfaces | N/A | N/A |
| Length of Cut | 3/16 to 1 1/2 in. (5 to 37 mm) | N/A | N/A |
| Blower Speed | 1,000 RPM | N/A | N/A |
| Recommended Max. Tractor HP | 300 HP (224 kW) | N/A | N/A |
| Minimum PTO HP Required | 180 HP (134.2 kW) | N/A | N/A |
| Knife Sharpener | 3 in. (76.2 mm) manual, built-in | N/A | N/A |
| Recutter Screens | 5 sizes available | N/A | N/A |
| Vertical Wheel Adjustment | 6 in. (152 mm), 3 positions | N/A | N/A |
| Weight | 5,130 lb. (2325 kg) | N/A | N/A |
| Length | 21 ft. 6 in. (6.5m) | N/A | N/A |
| Height with Standard Spout | 11 ft. 2 in. (3.4 m) | N/A | N/A |
| Width | 10 ft. 8 in. (3.3 m) | N/A | N/A |
| Tire Size, Tandem Axle | 11L x 15-15 6PR | N/A | N/A |
| Number of Rows | N/A | 3 | N/A |
| Row Spacing | N/A | 28 to 32 in. (711 to 813 mm) | N/A |
| Drive Protection | N/A | Slip clutch | Slip clutch |
| Type of Sickle | N/A | Rotary | N/A |
| Stalk Deflector | N/A | Standard | N/A |
| Power Divider | N/A | Standard (left and right) | Standard (left and right) |
| Chain Size | N/A | #60 Roller chain | #80 Roller Chain |
| Overall Width | N/A | 7 ft. 8 in. (2337 mm) | 9 ft. 9.5 in. (2.98 m) |
| Length | N/A | 7 ft. 9 in. (2362 mm) | 20 in. (508 mm) |
| Height | N/A | 4 ft. 5 in. (1346 mm) | N/A |
| Weight | N/A | 2,030 lb. (921 kg) | 1,200 lb. (544 kg) |
Round Balers RB456HD PRO & RB466HD PRO Specifications
| Model | RB456 HD PRO | RB466 HD PRO |
|---|---|---|
| POWER Type | Rotor Feeder | Rotor Feeder |
| Rotor Cutter | Rotor Cutter | Rotor Cutter |
| BALE DIMENSIONS Diameter (Minimum/Maximum) | 36-65 in. (90-165 cm) | 36-75 in. (90-190 cm) |
| Width | 47.25 in. (120 cm) | 47.25 in. (120 cm) |
| TRACTOR REQUIREMENTS Minimum PTO Power (HP) | 100 | 120 |
| PTO Speed | 1,000 | 1,000 |
| Hydraulic Remotes Required | 2 | 2 |
| Main Drive | Cut-out clutch | Cut-out clutch |
| PICK-UP Standard Working Width | 90 in. (2.3 m) | 90 in. (2.3 m) |
| Outside Width Tine-to-Tine | 82 in. (2.07 m) | 82 in. (2.07 m) |
| Five Tine Bar Pick-Up with Rubber Tines | Standard | Standard |
| Roller Windguard | Standard | Standard |
| Flotation | Double adjustable spring | Double adjustable spring |
| Pick Up Protection | Radial pin clutch | Radial pin clutch |
| No Tools Adjust Pickup Gauge Wheels | Standard | Standard |
| No Tools Adjust Castering Pickup Gauge Wheels | Option | Option |
| Gauge Wheels (15/6.00 -6) | Standard | Standard |
| Feeding System | 13/25 | 13/25 |
| Theoretical Cut Length | 3.25 in. (83 mm)/1.6 in. (41 mm) | 3.25 in. (83 mm)/1.6 in. (41 mm) |
| BALE FORMATION Type | Combination of rolls and belts | Combination of rolls and belts |
| Formation Rolls | 2 | 2 |
| Belts | Endless | Endless |
| Double Belt Drive | Standard | Standard |
| Bale Shape Indicators | Standard | Standard |
| Net Capacity | Once active plus two in storage | Once active plus two in storage |
| BALE DENSITY SYSTEM Dual Density System | Standard | Standard |
| Density Control | In-cab control through monitor | In-cab control through monitor |
| BALER ELECTRONICS Isobus Connection Ready | Standard | Standard |
| Pro 700 Monitor | Option | Option |
| Baler Automation System | Active with unlock code | Active with unlock code |
| Moisture Sensor | Option | Option |
| Maximum Traveling Speeds | 32 mph (50 kph) | 32 mph (50 kph) |
| Bale Ramp | Spring | Spring |
| BALER DIMENSIONS Length | 202 in. (5.12 m) | 202 in. (5.12 m) |
| Width on 500/55-20 Tires | 108 in. (2.74 m) | 108 in. (2.74 m) |
| Width on 620/40-22.5 Tires | 115 in. (2.91 m) | 115 in. (2.91 m) |
