Z-Wave Protocol Implementation Conformance Statement
In-Wall Smart Switch
General Information
Product Identifier: 46562/ZW4008
Brand Name: Jasco
Product Version: HW: 255 FW: 5.53
Z-Wave Certification #: ZC10-19056490
Product Features
- Firmware Updatable: Updatable by Consumer by RF
- Neutral Wire Required: Yes
- Z-Wave Scene Type: Central Scene
Z-Wave Product Information
- Supports Z-Wave Beaming Technology?: Yes
- Supports Z-Wave Network Security?: Yes
- Supports Z-Wave AES-128 Security S0?: No
- Supports Security S2?: Yes: S2 Authenticated, S2 Unauthenticated
- SmartStart Compatible?: Yes
Z-Wave Technical Information
- Z-Wave Frequency: U.S. / Canada / Mexico
- Z-Wave Product ID: 0x3136
- Z-Wave Product Type: 0x4952
- Z-Wave Hardware Platform: ZM5202
- Z-Wave Development Kit Version: 6.81.03
- Z-Wave Library Type: Enhanced 232 Slave
- Z-Wave Device Type / Role Type: On/Off Power Switch / Always On Slave
Association Group Information
| Group # / Max Nodes | Description |
|---|---|
| 1 / 5 | Supports Basic Set and is controlled by pressing the ON or OFF button with the local load. |
| 2 / 5 | Supports Basic Set and is controlled by double pressing the ON or OFF button. |
Supported Command Classes (18):
- Application Status
- Association V2
- Central Scene V3
- Device Reset Locally
- Manufacturer Specific V2
- Scene Activation
- Security S2
- Switch Binary V2
- Version V3
- Association Group Info
- Basic V2
- Configuration V4
- Firmware Update Meta-Data V4
- Powerlevel
- Scene Actuator Conf
- Supervision
- Transport Service V2
- Z-Wave Plus Info V2
Controlled Command Classes (1):
- Basic V2
