KOORUI Monitor User Manual
Model: SOY-1200250, SOY-1200250JP
About the Brand
KOORUI
As an emerging Internet technology trend brand, KOORUI is committed to creating a smart IoT space for young users around the world. It is oriented at the needs of young people, focuses on smart life services for such application scenarios as work, home, entertainment and social interaction, and pursues the ultimate products, helping customers feel the creativity and technological power of KOORUI in their play.
About the Company
Who has founded the KOORUI brand? It is Shenzhen Koorui technology Co.,Ltd.
What does the Company do? It is a global mobile Internet company focusing on the design, R&D and sales of smart hardware and electronic products. As a distributor of global well-known brands, the Company has multi-channel agents and multiple domestic and overseas service platforms, which facilitates continuous expansion of its online and offline brand influence.
Notes
Suggestions for Eye Health
In order to avoid the possible eye fatigue and pains in the neck/arm/back/shoulder caused by long-time use of the Monitor, please keep the following suggestions in mind:
- Place the Monitor (screen) at a distance of 20~28 inches (about 50~70 cm) from your eyes.
- Increase the blinking frequency appropriately to keep your eyes moist when using the Monitor, and moisten your eyes after long-time use of the Monitor.
- Take a 20-minute break after two-hour use of the Monitor.
- Take frequent breaks: keep your eyes away from the Monitor and look at a distant target for 20 seconds or longer.
- During the break, stretch to soothe your neck, arms, back and shoulders.
Low blue light description
The wavelength of blue light is in the blue light band. This monitor has the function of reducing blue light emission. Can select the low blue light mode in the menu to protect your eyes (need the support of the monitor).
HDMI, HDMI High-Definition Multimedia Interface and the HDMI logo are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries.
Product Introduction
Packing List
- 1. LCD screen
- 2. Holder
- 3. Base
- 4. Power cord (optional)
- 5. Signal cable (optional)
- 6. Adapter (optional)
- 7. Screws (optional)
- 8. User Manual (including the Warranty Card and Certificate of Quality)
(This list contains optional items. The items you have received may be different from this list.)
User Settings
Please read this Manual before operating the product. The product specifications are subject to change without further notice.
Functions of Buttons
| Button | Action |
|---|---|
| M | Press this button to display the main menu, return to the previous menu or exit the main menu. |
| Navigation / Decrease | When the menu is opened, press this button to select the left/below item, and the value of the progress bar will decrease. When the menu is closed, this button can act as a defined hot key. |
| Navigation / Increase | When the menu is opened, press this button to select the right/upper item, and the value of the progress bar will increase. When the menu is closed, this button can act as a defined hot key. |
| E | When the menu is opened, press this button to select the right/upper item, and the value of the progress bar will increase. When the menu is closed, this button can act as a defined hot key. |
| ⚡️ Power | Press it to turn on/off the Monitor. |
| Power LED | Remains on: normal working state; Flashes: power-saving standby state. |
Note: the actual buttons depend on the product model.
Troubleshooting (FAQ)
| Problem/Failure | Possible Solution |
|---|---|
| The power LED fails to be turned on. |
|
| Plug-and-Play fails to be achieved. |
|
| The image is dim. |
|
| Jerkiness or moire occurs to the image. |
|
| The power LED remains on or flashes, but there is no image on the screen. |
|
| Some colors are missing (red/green/blue). |
|
| The image is not centered or the image size is not appropriate. |
|
| The image demonstrates chromatic aberration (white does not look white). |
|
| The image/text is blurred in case of VGA signal. |
|
| There is color deviation under VGA signal. |
|
Functions of Operating Menu (OSD)
| Menu Item | Submenu Item | Subsubmenu Item | Description |
|---|---|---|---|
| Display | Brightness | None | To adjust the screen brightness. |
| Contrast | None | To adjust the LCD contrast. | |
| DCR | ON | To enable the dynamic contrast. | |
| OFF | To disable the dynamic contrast. | ||
| Return | None | To return to the previous menu. | |
| Exit | None | To exit the main menu. | |
| Language | Return | None | To return to the previous menu. |
| Exit | None | To exit the main menu. | |
| English Italiano 日本語 Française Deutsch 中文 | None | None | |
| OD | Off | None | Turn off the OD function. (if supported by the Monitor) |
| Normal | None | General OD functionality. (if supported by the Monitor) | |
| Extreme | None | Extreme OD functionality. (if supported by the Monitor) | |
| Return | None | To return to the previous menu. (if supported by the Monitor) | |
| Exit | None | To disable the OD function. (if supported by the Monitor) | |
| Crosshair 1/2/3/4/5/6 | None | Switch the game front sight (this needs the support of the monitor) | |
| Freesync Premium | Return | None | To return to the previous menu. (if supported by the Monitor) |
| Exit | None | To disable the OD function. (if supported by the Monitor) | |
| ON | None | Open FreeSync (this needs the support of the monitor) | |
| OFF | None | Close FreeSync (this needs the support of the monitor) | |
| Return | None | To return to the previous menu. (if supported by the Monitor) | |
| Game Mode | Exit | None | To disable the OD function. (if supported by the Monitor) |
| MPRT | ON | Open MPRT (if supported by the Monitor) | |
| OFF | Close MPRT (if supported by the Monitor) | ||
| Return | None | To return to the previous menu. (if supported by the Monitor) | |
| Exit | None | To disable the OD function. (if supported by the Monitor) | |
| Timer | 30/40/50/60/90 min | Open game timing (if supported by the Monitor) | Close game timing (if supported by the Monitor) |
| Close | None | To return to the previous menu. (if supported by the Monitor) | |
| Return | None | To disable the OD function. (if supported by the Monitor) | |
| Exit | None | Open HDR (if supported by the Monitor) | |
| HDR | ON | None | Close HDR (if supported by the Monitor) |
| OFF | None | To return to the previous menu. (if supported by the Monitor) | |
| Return | None | To disable the OD function. (if supported by the Monitor) | |
| Exit | None | To return to the previous menu. | |
| Preset Mode | None | Normal mode | Normal mode |
| Standard | None | Movie mode | |
| Movie | None | FPS game mode (if supported by the Monitor) | |
| FPS | None | RTS game mode (if supported by the Monitor) | |
| RTS | None | Blue-light filter mode (if supported by the Monitor) | |
| Eye Saver | None | To return to the previous menu. | |
| Return | None | To exit the main menu. | |
| Color Temp | Exit | None | To activate warm color temperature. |
| Warm | None | Set to standard color temperature | |
| Standard color | None | To activate cool color temperature. | |
| Cool | None | To fine-tune the temperature of red. | |
| User | Red | To fine-tune the temperature of green | |
| Green | To fine-tune the temperature of blue. | ||
| Blue | To activate the DCI-P3 mode. (if supported by the Monitor) | ||
| DCI-P3 | None | To activate the sRGB mode. (if supported by the Monitor) | |
| SRGB | None | To activate the Adobe RGB mode. (if supported by the Monitor) | |
| Adobe RGB | None | To return to the previous menu. | |
| Return | None | To exit the main menu. | |
| Exit | None | To adjust the aspect ratio automatically. | |
| Aspect Ratio | Auto | None | To adjust the aspect ratio to wide screen mode. |
| 16:9 | None | To adjust the aspect ratio to 4:3. | |
| 4:3 | None | To return to the previous menu. | |
| Return | None | To exit the main menu. | |
| Exit | None | VGA (analog) signal input (if supported by the Monitor) | |
| VGA | None | DVI (digital) signal input (if supported by the Monitor) | |
| DVI | None | HDMI (digital) signal input (if supported by the Monitor) | |
| HDMI | None | DisplayPort (digital) signal input (if supported by the Monitor) | |
| DP | None | TYPE-C (digital) signal input (if supported by the Monitor) | |
| TYPE-C | None | To return to the previous menu. | |
| Return | None | To exit the main menu. | |
| Exit | None | To enable the automatic shutdown function. | |
| Input Source | Return | None | To disable the automatic shutdown function. |
| Exit | None | To return to the previous menu. | |
| ON | To exit the main menu. | ||
| OFF | To adjust the hue lightness to gray scale 1. | ||
| Return | None | To adjust the hue lightness to gray scale 1. | |
| Other | Power Off | Exit | To return to the previous menu. |
| To exit the main menu. | |||
| Gamma | Gamma1 | To adjust the volume (if the Monitor supports audio output). | |
| Gamma2 | None | None | |
| Return | None | None | |
| Exit | None | None | |
| Volume | ON | None | None |
| Other | BackCoverLight | Red | Switch the atmosphere light to static red (if supported by the Monitor) |
| Blue | Switch the atmosphere light to static blue (if supported by the Monitor) | ||
| Colorful | Switch the atmosphere light to dynamic mode (if supported by the Monitor) | ||
| Breathe | Switch the atmosphere light to dynamic mode (if supported by the Monitor) | ||
| Marquee | Switch the atmosphere light to dynamic mode (if supported by the Monitor) | ||
| Close | Turn off the atmosphere light (if supported by the Monitor) | ||
| Return | To return to the previous menu. | ||
| Exit | To exit the main menu. | ||
| Calibration | Auto Calibrate Image | To adjust the image's horizontal/vertical alignment, focus and clock automatically. | |
| Auto Calibrate Color | To adjust the color's white balance | ||
| Clock | To adjust the image's clock in order to reduce vertical noise (VGA signal only). | ||
| Focus | To adjust the image's phase in order to reduce horizontal noise (VGA signal only). | ||
| Return | To return to the previous menu. | ||
| Exit | To exit the main menu. | ||
| PIP | PIP | Switch the source of picture-in-picture | |
| PBP | Switch the source of dual split screen | ||
| Reset | Reset to single window display | ||
| Return | To return to the previous menu. | ||
| Exit | To exit the main menu. | ||
| Reset | Yes | To reset to factory defaults. | |
| No | Not to perform the reset function. | ||
| Return | To return to the previous menu. | ||
| Exit | To exit the main menu. | ||
| Exit | None | To exit the main menu. |
Note: the above functions depend on the specific model, and may be subject to change due to software upgrade.
Manufacturer Information
| Manufacturer | Model | Rating |
|---|---|---|
| Shenzhen SOY Trchnology Co.,Ltd | SOY-1200250 ** -056 | 12Vdc, 2.5A |
| Shenzhen SOY Trchnology Co.,Ltd | SOY-1200250JP | 12Vdc, 2.5A |
**=EU, GB, US
Safety Instructions
- If your equipment uses an AC adapter:
- Only use the AC adaptor provided with your KOORUI product.
- Do not use the power cord with other products.
- ℹ️ Important Safety Instructions, Please read the instructions carefully and keep them for later use
- ⚡️ The lightning flash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons and animals.
- ⚠️ Warning! Please refer the information on the exterior enclosure for electrical and safety information before installing or operating the apparatus.
- ? Note: If you would like to connect an external device with this product, a good quality shielded cable must be used, which ensures the electromagnetic compatibility of the product and the used cable as a whole.
- ℹ️ This product is only intended to be used as a monitor. For sound playback additional headphones or speakers, possibly with their own power supply, are required. Do not use the product for any other purpose than described in this manual in order to avoid any hazardous situation. Improper use is dangerous and will void any warranty claim.
- ? For household use only. Do not use outdoors.
- ? Danger of suffocation! Keep all packaging material away from children.
- ?️ Only use under normal room temperature and humidity conditions.
- ⬆️ Altitude:0-5000m
- ?️ temperature: 0-40 °C
- ? CAUTION: Risk of fire or explosion if the battery is replaced by an incorrect type.
- ? The product is only suitable for use at moderate degrees of latitude. Do not use in the tropics or in particularly humid climates.
- ❄️➡️☀️ Do not move the product from cold into warm places and vice versa. Condensation can cause damage to the product and electrical parts.
- ? Do not use attachments or accessories other than recommended by the manufacturer or sold with this product. Install in accordance with this user manual.
- ?️ When installing the product, leave sufficient space for ventilation (minimum 10 cm around the product). Do not install in bookcases, built-in cabinets or the like.
- ??️ Do not impede ventilation by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. Do not insert any objects into the housing, e.g. through the ventilation openings. Do not install near any heat sources such as radiators, heat registers, stoves or other products (including amplifiers) that produce heat.
- ⚠️ Do not shift or move the product when powered on.
- ? Do not touch, push or rub the surface of the product with any sharp or hard objects.
- ?? Danger! To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
- ?? The product shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the product.
- ?️ Care should be taken so that no objects or liquids enter the enclosure through openings.
- ?️? No naked flame sources, such as lighted candles, should be placed on the product.
- ?️ Refer all servicing to an authorised service agent. Do not attempt to repair the product yourself. Servicing is required when the product has been damaged in any way, such as the supply cord or plug are damaged, liquid has been spilled, objects have fallen into the product, the enclosure is damaged, the product has been exposed to rain or moisture, does not operate normally, or has been dropped.
- ? Make sure to rest the AC/DC Adapter flat on a table or the floor. If you place the AC/DC Adapter so that it is hanging with the AC cord input facing upwards, water or other foreign substances could enter the Adapter and cause the Adapter to malfunction.
- ? Before connecting the product to a socket outlet, make sure the voltage indicated on the product corresponds to your local mains.
- ⚠️ If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid hazard.
- ⚡️ Regularly check if the supply cord, product or extension cable is defective. If found defective, do not put the product into operation. Immediately pull the plug.
- ?♂️ Place the supply cord and, if necessary, an appropriate extension cable in such away that pulling or tripping over it is impossible. Do not allow the supply cord to hang down within easy reach.
- ? Do not jam, bend or pull the supply cord over sharp edges.
- ? The power plug is used as the disconnect device; the disconnect device shall remain readily operable. To completely disconnect the power input, disconnect the mains plug.
- ⚡️ The product may not function properly or not react to the operation of any control due to electrostatic discharge. Switch off and disconnect the product; reconnect after a few seconds.
- ?♀️ Protect the supply cord from being walked on or pinched particularly at the plug, convenience receptacles and the point where it exits from the product.
- ?✋ Never pull the plug by the supply cord or with wet hands.
- ⚡️⛈️ Disconnect the power plug in case of faults during use, during lightening storms, before cleaning and when not using the product for a longer period of time.
- ? Danger! Before cleaning, switch the product off and disconnect the power plug from the socket.
- ? When the product has reached the end of its service life, make it defective by disconnecting the plug from the socket and cutting the cord in two.
- ?? The apparatus must be connected to an earthed MAINS socket-outlet (Class I Equipment only). Or Use only a properly grounded plug and receptacle (Class I Equipment only).
- ? As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by POWER.
Regulatory Notices
Intended use
This product is designed as a monitor only. For sound playback additional headphones or speakers, possibly with their own power supply, are required. The product is not intended for any commercial or industrial use. Do not use it for other purposes. Any other use might lead to damage of the product or personal injury. The KOORUI assumes no liability for damage to the product, for property damage or for personal injury due to careless or improper usage of the product, or usage of product which does not meet the manufacturer's specified purpose.
CE Conformity
This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive (2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive(2011/65/EU). This product has been tested and found to comply with the harmonized standards for Information Technology Equipment published under Directives of Official Journal of the European Union.
WEEE Statement
Under the European Union ("EU") Directive on Waste Electrical and Electronic Equipment, Directive 2012/19/EU, products of "electrical and electronic equipment" cannot be discarded as municipal waste anymore and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life.
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the measures listed below:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/television technician for help.
Notice 1 The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Notice 2 Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.
