HECATE Air 2

1. Power ON/OFF

Take earbuds out of the case or put them in the case to power on/off.

Power ON: 3s

Power OFF: 5s

[Image: Diagram showing earbuds being removed from and placed into a charging case.]

2. Pairing

Power on and then select "HECATE Air 2" in your device settings to connect.

[Image: Screenshot of a Bluetooth device list showing "HECATE Air 2" selected for connection.]

Note: For subsequent use, the earbuds will automatically connect to the device used last time.

3. Reset

In OFF state, press and hold the touch panel for 10s to reset (L/R earbud must be done separately).

[Image: Diagram illustrating the reset process by holding the touch panel.]

4. Charging

Input: 5V-400mA (Earbuds), 5V=500mA (Charging case)

[Image: Diagram showing earbuds being placed in the charging case and connected to a power source.]

Note: Please do not charge the earbuds when there is sweat or other liquids inside the charging port, which may damage the earbuds.

5. Controls

Left (L) Earbud Controls:

• Double Tap: Play/Pause Music, Answer/End Call
• Triple Tap: Next Track
• Long Press (2.5s): Previous Track
• Quadruple Tap: Activate Voice Assistant

Right (R) Earbud Controls:

• Double Tap: Play/Pause Music, Answer/End Call
• Triple Tap: Next Track
• Long Press (2.5s): Previous Track
• Quadruple Tap: Activate Voice Assistant

[Image: Illustration of the left and right earbuds with touch control areas indicated and corresponding actions listed.]

Note: Images are for illustrative purposes only and may differ from the actual product.