Instruction Manual for Xperience models including: Xperience 2-Speed A Cattle Clipper, Xperience 2-Speed, A Cattle Clipper, Cattle Clipper, Clipper
8 Instruction Manual / Xperience 2-Speed cattle clipper NOTE! XXThis advice designates additional information that simplifies operation of the device. 2.6 Stipulated usage This equipment is to be used exclusively to clip cattle and horses. Any other use or use extending beyond the above is considered
Manuals
File Info : application/pdf, 19 Pages, 800.48KB
DocumentDocumentswiss made de Viehschermaschine en Cattle clipper fr Tondeuse à bétail it Tosatrice per bestiame es Esquiladora para bovinos nl Veescheermachine da Kreaturklipper sv Boskapsklippmaskin nb Klippemaskin for storfe fi Trimmeri naudoille pt Máquina de tosquiar bovinos el Betriebsanleitung Instruction Manual Mode d'emploi Istruzioni per l'uso Instrucciones de uso Handleiding Driftsvejledning Användarinstruktion Instruksjonsbok Käyttöohjeet Manual de instruções Ausgabe/Index: Xperience 2-Speed/A 01-19 Table of contents 1 Safety .................................................................................................3 1.1 Generalities ........................................................................................ 3 1.2 Personnel requirements ..................................................................... 3 1.3 Dangers that can be caused by the device ........................................ 4 1.3.1 Danger from electrical current............................................................ 4 1.3.2 Animals............................................................................................... 5 1.3.3 Blades................................................................................................. 5 1.4 Personal Protective Equipment (PPE) ............................................... 6 2 Generalities ........................................................................................6 2.1 Guarantee conditions ......................................................................... 6 2.2 Customer service ............................................................................... 6 2.3 Limitation of liability ............................................................................ 7 2.4 Copyright ............................................................................................ 7 2.5 Symbols used ..................................................................................... 7 2.6 Stipulated usage................................................................................. 8 3 Technical data .................................................................................... 9 4 Assembly and function.......................................................................9 4.1 Construction ....................................................................................... 9 4.2 Functional description ...................................................................... 10 5 Transport, packaging and storage ................................................... 10 5.1 Scope of delivery.............................................................................. 10 5.2 Packaging ......................................................................................... 10 5.3 Storage ............................................................................................. 10 6 Operation ......................................................................................... 11 6.1 Requirements at the place of use......................................................11 6.2 Adjusting the clipping pressure .........................................................11 6.3 Switching the clipper on and off ....................................................... 12 6.4 Using the clipper............................................................................... 12 6.5 Replacing the clipping blades........................................................... 12 6.6 Lubrication ........................................................................................ 14 6.7 Cleaning............................................................................................ 15 7 Troubleshooting................................................................................ 16 7.1 Safety instructions ............................................................................ 16 7.2 Causes of malfunctions and their rectification ................................. 16 8 Spare parts....................................................................................... 18 9 Disposal ........................................................................................... 19 2 Instruction Manual / Xperience 2-Speed cattle clipper 1 Safety 1.1 Generalities DANGER! DANGER FROM DISREGARDING THE SAFETY INSTRUCTIONS! Disregarding the operating instructions and safety precautions presented in these operating instructions will lead to serious injury to people as well as damage to the device. XXThe warnings and instructions in these operating instructions must be observed. Observe the following safety instructions: XXDo not leave the clipper unattended as long as the plug is plugged in. XXStore the clipper out of reach of children. 1.2 Personnel requirements y This clipper may be operated only by persons who can be expected to carry out their work responsibly. Persons whose ability to react is undermined by, for example, drugs, alcohol or medication should not be allowed to use the device. y The operator must be experienced in handling the animals to be clipped. y Children are strictly prohibited from operating the device. Unauthorised persons CAUTION! DANGER FOR AND FROM UNAUTHORISED PERSONS! Unauthorised persons who do not meet the requirements described here will be unable to recognise dangers in the work area. XXProhibit access by unauthorised persons to the location where the clipping is being performed. XXIf in doubt, approach the persons and instruct them to leave the work area. XXSuspend work until the unauthorised persons have left the work area. Instruction Manual / Xperience 2-Speed cattle clipper 3 1.3 Dangers that can be caused by the device 1.3.1 Danger from electrical current DANGER! DANGER OF FATAL ELECTRIC SHOCK! Fatal electric shocks can result from contact with electrically live conductors or components! XXAlways disconnect the charger power cord from the mains by grasping the plug, not the cord. XXBefore every use, check the clipper for externally visible dam- age. If the clipper is damaged, do not use it. XXOnly ever insert the charger's electrical plug into an undam- aged socket. XXNever wrap the power cable around the clipper, and keep the clipper away from hot surfaces and objects. XXOnly permit repairs to the clipper to be made by authorised dealers or the factory customer service department; this applies especially to the replacement of a damaged power cord. XXBefore plugging the clipper in, compare the electrical connection data (voltage and frequency) on the nameplate with that of your electric mains. These data must be identical so that no damage occurs to the device. If in doubt, ask your specialised electrical dealer. XXDo not under any circumstances open the housing of the clipper. If voltage-bearing connectors are disturbed or the electrical and mechanical construction is modified, there is risk of electric shock. XXKeep moisture away from the clippers. This can cause a short circuit. If you suspect that moisture has penetrated the device, do not switch it on again; instead take it to a repair shop. XXNever clip wet animals. XXClean the clipper only when it is dry, using a brush or the enclosed cleaning brush. XXNever submerge the clipper in water or other liquids. XXAlways switch the clipper off before working on it. Pull the plug from the socket to prevent the device from being switched on inadvertently. XXNever operate this appliance with the air openings blocked or while on a soft surface, such as a bed or couch, where it is possible for the air openings to be blocked. Keep the air openings free of lint, hair, and similar objects. 4 Instruction Manual / Xperience 2-Speed cattle clipper 1.3.2 Animals CAUTION! DANGER OF INJURY BY ANIMALS! The noise of the clipper can trouble animals. A kick, an attack or the body weight of the animal can lead to injuries. XXJust persons being experienced in handling with animals are allowed to clip the animals. XXSecure the animal sufficiently and calm it before starting work. XXProceed with caution when working. XXCall in a second person if necessary. 1.3.3 Blades CAUTION! DANGER FROM MOVING COMPONENTS! The moving clipping blade and its sharp edges can cause injuries. XXProceed with caution when working. XXAvoid any contact with the moving clipping blades. XXDo not touch the area around the clipping blades whilst the ma- chine is still plugged in to a power source, even if it is switched off. Before working on the clipping blade/clipping head, always disconnect the electrical power first. XXDo not use damaged shearing blades with blunt or missing teeth. Only work with sharp shearing blades sharpened by a specialist workshop. CAUTION! DANGER OF BURNS! Insufficient oiling of the clipping head will cause it to become hot. This may agitate the animals. XXWhen clipping, oil the clipping blades and clipping head through the lubrication opening provided for this purpose at least every 15 minutes, so that the blades do not run dry. XXThe shearing blades may become hot after prolonged use. Instruction Manual / Xperience 2-Speed cattle clipper 5 1.4 Personal Protective Equipment (PPE) CAUTION! DANGER OF INJURY THROUGH INCORRECT OR MISSING PROTECTIVE EQUIPMENT! Personal protective equipment is required when working, in order to minimise the possibility of endangering health. XXAlways wear the protective equipment required for the current task when performing work. Antislip shoes. For protection against slipping on slippery underground. Protective goggles to protect eyes from flying parts. Close-fitting protective clothing with low resistance to tearing, with tight sleeves and no protruding parts. This is primarily to prevent injury if they become caught between moving parts of the machine. Do not wear rings, chains or other jewellery. Wear work gloves to protect against injury. The acoustic emission while operating the device is typically 68 dB(A). We recommend that you always wear ear protection when working with the device. 2 Generalities This manual facilitates a safe and efficient machine handling. Read these instructions carefully before starting operation. Basic requirements for a safe operation are the adherence of all the information regarding safety and operation in this manual. Keep this manual permanently. If you hand on the equipment to other persons, provide them with this manual. 2.1 Guarantee conditions The guarantee conditions are included in the general terms and conditions of the manufacturer. 2.2 Customer service For technical information, our customer service and our authorised service centres are at your disposal. Furthermore, our staff is interested in new information and experience resulting from the operation which could be useful for the improvement of our products. 6 Instruction Manual / Xperience 2-Speed cattle clipper 2.3 Limitation of liability All data and information in this instruction manual were arranged in consideration of the current standards and regulations and state of the art as well as our realizations and experiences of many years. The manufacturer assumes no liability for disadvantages due to: y Disregarding the operating instructions. y Non-intended uses of the device. y Assignment of not instructed personal. y Technical modifications. y Use of non-original spare parts. The actual scope of delivery can differ from specially designed models, from additional ordering options or due to the latest state of the art from the here described annotations and illustrations. 2.4 Copyright This document is protected by copyright. Any kind of reproduction or copying, in whole or in part, or the reproduction of images, even when changed, may be performed only with the written agreement of the manufacturer. 2.5 Symbols used DANGER! A WARNING AT THIS DANGER LEVEL DESIGNATES AN IMMINENTLY DANGEROUS SITUATION. If the dangerous situation is not avoided, it will lead to death or serious injury. XXTo avoid the danger, follow the instructions shown. CAUTION! A WARNING AT THIS DANGER LEVEL DESIGNATES A POSSIBLY DANGEROUS SITUATION. If the dangerous situation is not avoided, it can lead to injury. XXTo avoid the danger, follow the instructions shown. CAUTION! A WARNING AT THIS DANGER LEVEL DESIGNATES POSSIBLE PROPERTY DAMAGE. If the dangerous situation is not avoided, it can lead to property damage. XXTo avoid the danger, follow the instructions shown. Instruction Manual / Xperience 2-Speed cattle clipper 7 NOTE! XXThis advice designates additional information that simplifies operation of the device. 2.6 Stipulated usage This equipment is to be used exclusively to clip cattle and horses. Any other use or use extending beyond the above is considered unauthorised. CAUTION! Danger from unauthorised use! Danger can result from improper use or use for a purpose other than that intended. XXUse the device only as intended. XXLimit yourself to the procedures described in these operating instructions. Claims of any nature for damage resulting from unauthorised use will not be accepted. Such use is entirely at the operator's own risk. CAUTION! Danger due to incorrect use! In particular, the following applications of the device are prohibited: XXUsing the machine on persons. XXClipping other animals, in particular dangerous animals such as beasts of prey. 8 Instruction Manual / Xperience 2-Speed cattle clipper 3 Technical data Handle Ø 54 mm Length 301 mm Weight (without charger power cord) 1.18 kg Voltage Maximum current consumption Frequency See rating plate on the device Power drawn Rotary speed Noise emission (LPA) Uncertainty K Ambient temperature range 68 dB(A) (EN 60745-1:2009) 3 dB 0 - 40 °C Maximum relative humidity Vibration ahv Uncertainty K 10 - 90% 4,9 m/s2 1,5 m/s2 We reserve the right to make technical changes and improvements without notice. 4 Assembly and function 4.1 Construction 6 5 4 1 23 78 1 Blades 2 Clipperhead 3 Lubrication opening 4 Clipping pressure adjustment 5 Motor unit 6 ON/OFF switch 7 Air filter 8 Cable Fig. 1 Instruction Manual / Xperience 2-Speed cattle clipper 9 4.2 Functional description 1 The clipper is used for clipping cattle and horses. Two comb-shaped blades are the cutting tool. The lower blade (2), which is closest to the animal's skin, is fixed and attached to the housing. The top blade (3) is agitated crossways that one. The upper blade is set in motion with the help of a pivot lever. The clip- 23 ping pressure between the blades is adjusted via the adjustable head (1). Fig. 2 5 Transport, packaging and storage 5.1 Scope of delivery 1 Clipper 1 pair of clipping blades 1 special screwdriver 1 bottle of special lubricating oil 1 cleaning brush 1 case for transport and storage 1 operating instructions NOTE! XXCheck to ensure the completeness of the contents and that there is no damage. Please report incomplete package contents or any apparent damage immediately to your supplier/ dealer. 5.2 Packaging For the packaging, just non-polluting material is being used. The return of the packaging saves raw materials and reduces the volume of waste. Dispose of packaging materials that are no longer needed in accordance with locally applicable regulations. 5.3 Storage Store clipper and accessories on the following conditions: XXDo not store outdoor. XXStore dry and dust-free. XXProtect against solar irradiation. XXAvoid mechanical shocks. XXStorage temperature: 0 until 40°C. XXRelative humidity: max. 90%. XXWhen storing longer than 3 months, check periodically the general con- dition of all parts. 10 Instruction Manual / Xperience 2-Speed cattle clipper XXWhen not using the clipper, store it in the case making sure it is well cleaned, lubricated and that the clipping elements are not spring loaded (risk of corrosion). 6 Operation 6.1 Requirements at the place of use XXObserve the manual (see chapter 3 Technical data). XXPower outlets in the outer area must be equipped with a residual current circuit breaker (FI). XXThe work place must have adequate lighting. XXThe electrical socket must be easily accessible so that the device can be quickly disconnected from the mains. XXThe charger power cord must not be taut or kinked. XXMake sure there is adequate ventilation. 6.2 Adjusting the clipping pressure Set the clipping pressure as follows before you start clipping: Fig. 3 XXTurn the adjusting knob in the direction of the arrow until you feel resistance. XXTurn the knob another 1/4 turn in the direction of the arrow. XXIf the clipping quality deteriorates, increase the clipping pressure by turning the adjusting knob another 1/4 turn in the direction of the arrow. If this does not produce the desired result, the blades must be replaced or sharpened. NOTE! XXIf the clipping pressure is too low, hair can gather between the clipping blades. This results in a poor clipping quality. In this case, clean the clipping blades as described in chapter 6.7. Instruction Manual / Xperience 2-Speed cattle clipper 11 6.3 Switching the clipper on and off 0 I II XXTo switch the clipper on, slide the ON/OFF switch to the position I or II. XXTo switch the clipper off, slide the ON/OFF switch to the position 0 (see Fig. 4). Fig. 4 6.4 Using the clipper XXApproach the animal from the front. XXSecure the animal to be clipped and calm it down. XXPlug the power plug into the socket. XXSwitch the clipper on while you are in the visual range of the animal. XXSelect the desired speed (level I or II). XXObserve the animal's behaviour while clipping. XXSwitch the clipper off after you have finished clipping and pull the plug from the socket. 6.5 Replacing the clipping blades XXSwitch the clipper off by sliding the switch to the position 0. XXPull the plug from the socket. XXTurn the adjusting knob in the direc- tion of the arrow until the resistance decreases. XXPlace the clipper with the comb plate screws facing upwards on a flat surface. Fig. 5 XXLoosen the comb plate screws and remove the clipping blades. Fig. 6 12 Instruction Manual / Xperience 2-Speed cattle clipper Fig. 7 NOTE! XXMake sure the clipping blades are positioned correctly when installing the new or sharpened blades. XXPlace the new upper blade on the guiding tips of the pivot lever. XXApply a few drops of oil on the polished surfaces of the upper blade. Fig. 8 1,5 2 mm Fig. 9 XXInstall the new lower blade. Align it so that the ground surface of the lower blade protrudes approx. 1.5 2 mm above the point of the upper blade. XXTighten the comb plate screws. Instruction Manual / Xperience 2-Speed cattle clipper 13 NOTE! XXOnly work with sharp blades, replace blunt or defective blades without teeth. The correct resharpening of blades is only to do by special machines or by a specialist. In that case, contact your service centre. 6.6 Lubrication To achieve a well-clipped animal and to increase the life of the device including the clipping head, it is necessary to apply a thin coat of oil between the upper and lower blades. All other moving parts of the clipping head must also be lubricated. XXApply some drops of oil on to the clipping blades and into the lubrica- tion opening. Fig. 10 CAUTION! POSSIBLE DAMAGE TO THE CLIPPER! Insufficient oiling of the clipping head will lead to warming and will shorten the life of the clippers and its blades. XXOil the clipping blades adequately during the clipping session, at least once every 15 minutes, so that they do not run dry. XXOnly use the special oil supplied or a paraffin oil conforming to the ISO VG 15 specification. NOTE! XXThe provided oil is non-toxic and produces no irritation on contact with the skin or the mucous membranes. This paraffin oil degrades to some 20% after 21 days (CEL-L-33-T-82). XXOil the blades prior to, during and after every use. XXOil the blades no later than when the blades leave streaks or slow down. XXApply several drops of oil on the front and on the sides of the clipping blades (see Fig. 10). XXWipe excess oil off with a soft, dry cloth. XXLubrication sprays do not have sufficient oil for a good lubrication, but serve for cooling the blades. XXImmediately replace damaged or notched blades in order to avoid inju- ries. 14 Instruction Manual / Xperience 2-Speed cattle clipper 6.7 Cleaning CAUTION! IMPROPER CLEANING. RISK OF DAMAGING THE CLIPPER! XXClean the clipper only with a dry cloth and with the brush supplied. To clean the air filter, use exclusively a dry brush or a nailbrush. XXNever use compressed air for cleaning the clipper. Housing of the clipper XXClean the housing of the clipper with a dry cloth. Shearing blade and shearing head XXUse the brush supplied to clean the shearing blade and the shearing head. XXLubricate the clipping blades as described in chapter 6.6. Air filter XXRemove the air filter from the clipper. XXClean the air filter with a dry brush or a nailbrush. Make sure no foreign objects get into the device while cleaning it. XXSlide the air filter back onto the clipper. Fig. 11 CAUTION! POSSIBLE DAMAGE TO THE CLIPPER! Operating the clipper without the air filter can damage the clipper. XXOnly use the clipper with a properly fitted air filter. Instruction Manual / Xperience 2-Speed cattle clipper 15 7 Troubleshooting 7.1 Safety instructions DANGER! DANGER OF FATAL ELECTRIC SHOCK! Fatal electric shocks can result from contact with electrically live conductors or components! XXSwitch the equipment off before troubleshooting the problem. XXRepairs to electrical devices must only be carried out by the factory service department or specialists who have been trained by the manufacturer. During the warranty period the device must be opened only by personnel authorised by the manufacturer, otherwise the warranty will be void. 7.2 Causes of malfunctions and their rectification Malfunction Cause Rectification Upper blades moving too little. Leaf springs broken. Eccentric square or eccentric shaft worn (insufficient lubrication). Notify customer service. Top blade does not move. Defective gear wheel. Notify customer service. Adjusting knob jammed. Thread dirty or rusty. Notify customer service. Pressure spring jammed. Leaf springs in the head Comb plate screws loose. Tighten the comb plate mount are too loose. screws. Play between pivot lever Leaf springs and/or cylin- Notify customer service. and leaf spring. der head screws worn. Pivot lever difficult to move up and down. Centring sleeve lost. Notify customer service. Motor runs very slowly. Clipper blades were not Lubricate the clipping oiled sufficiently. blades. Motor and/or electronics Notify customer service. defective. 16 Instruction Manual / Xperience 2-Speed cattle clipper Malfunction Motor does not run or stops immediately. No speed difference between level I and level II. Clipper cuts badly or not at all. Motor unit becomes hot. Cause Rectification Clipping pressure too strong. Reduce the clipping pressure, as described in chapter 6.2. Have the blades sharpened. Smell of burning from Notify customer service. the motor housing. Motor burned out. Motor and/or electronics defective. Motor turns off due to overload. Turn off the device, allow it to cool down and then turn it on again. Notify customer service if the device is not working properly. Motor and/or electronics Notify customer service. defective. Magnet missing. Clipper blades blunt. Notify customer service. Clipper blades have not been correctly ground. Clipper blades are not oiled. Lubricate the clipping blades every 15 minutes. Clipping pressure too low. Increase the clipping pressure, as described in chapter 6.2. Leaf springs broken. Notify customer service. The animal`s hair is wet. Only clip dry hair. Hairs jammed between top and bottom blades. Remove the clipping blades; clean, lubricate and install them again; set the clipping pressure. Too much play at the clip- Notify customer service. ping head. Clipping blades not prop- Align the clipping blades erly aligned. correctly, see Fig. 9. Air filter clogged. Clean or replace the air filter. Clipping pressure too high. Reduce the clipping pressure. Bearing faulty. Notify customer service. Instruction Manual / Xperience 2-Speed cattle clipper 17 8 Spare parts See spare parts list at the end of these operating instructions. CAUTION! FAULTY SPARE PARTS MAY CAUSE DAMAGES, MALFUNCTIONS OR TOTAL LOSS AND MAY REDUCE SECURITY. XXUse only original spare parts from the manufacturer. Obtain spare parts from an authorised dealer or directly from the manufacturer. NOTE! XXIf non-approved parts are used, all warranty, service, compensation and liability claims against the manufacturer or its employees, dealers and representatives will be forfeited. During the warranty period the device must be opened only by personnel authorised by the manufacturer, otherwise the warranty will be void. Pos. No. Description Clipper 1 Clipper head cattle complete 2 Tension nut cattle 3 Distance screw 4 Tension sleeve 5 PH-screw M5 x 14 6 Clipper head case 7 Pressure spring 8 Pressure plate 9 Eccentric square 10 Cylinder screw with shank M3 x 6 11 Leaf spring 12 Turning lever 13 Comb plate screw, cattle/horse 14 Centring bush complete 15 Circlip for shaft size 3.73 16 Circlip for shaft size 6 17 Crankshaft cattle 18 Crank spindle sleeve complete 19 Gear wheel Z22, cattle 30 Air filter 31 Switch lever 32 Upper housing cover 33 Catch spring for switch with magnet Quantity 1 1 1 1 2 1 1 1 1 2 2 1 2 2 1 1 1 1 1 1 1 1 1 18 Instruction Manual / Xperience 2-Speed cattle clipper Pos. No. Description 34 Motor complete 35 Front bearing flange 36 Stator 37 Ball bearing 8-19-6 38 Lock washer 39 Rotor incl. ball-bearing 40 Play compensation disc 626 41 Bearing flange, rear, with carbon brush springs 42 Carbon brush spring 43 PH-screw M4 x 10 44 Impeller 45 Carbon brush 46 Motor bracket 47 Lower housing cover 48 Cable grip 49 Anti-kink sleeve 50 PCB 51 Contact wire 52 PT-screw KA30 x 16 53 Cable 9 Disposal Quantity 1 1 1 2 1 1 1 1 2 1 1 2 4 1 1 1 1 1 11 1 CAUTION! Environmental damages when disposing incorrectly! XXElectrical waste, lubricants and other consumable materials are subject to special regulations regarding disposal. They can only be disposed of only through qualified specialists! NOTE! XXDispose of the clipper at a service centre or nearby electrical workshop. Instruction Manual / Xperience 2-Speed cattle clipper 193-Heights™ PDF Optimization Shell 6.3.1.5 (http://www -tools.com)