V102 Multi-functional Keyboard User Manual

Key Features

• Multi-functional combination buttons
• Bluetooth connectivity
• Switch with lighting
• LOGO screen
• Wired connection

Basic Parameters

System: Windows, Mac OS, Android

Product Size: Not specified

Display: Yes

Switch ON/OFF: Yes

Type-C Interface: Yes

2.4G Storage Compartment: Yes

Quick Key Description

FN + F1: Screen brightness down

FN + F2: Screen brightness up

FN + F3: Switch to multitasking control window (ALT+TAB)

FN + F4: Open microphone (WIN+H)

FN + F5: Multimedia controls

FN + F6: Previous song

FN + F7: Play/Pause

FN + F8: Next song

FN + F9: Stop

FN + F10: Mute

FN + F11: Volume down

FN + F12: Volume up

FN + Page Up/Down: Adjust backlight brightness (100%, 70%, 30%, OFF)

FN + Right/Left Arrow: Adjust backlight effect speed (5 levels)

FN + WIN + ESC: Restore backlight to factory default settings.

FN + 3: Switch to Bluetooth channel 3

FN + 4: Switch to Bluetooth channel 4

FN + 5: Switch to 2.4G mode. Enters 2.4G pairing mode, mode light displays green.

FN + TAB: Swap ASWD keys and arrow keys functionality.

FN + WIN: Lock/Unlock WIN and APP functions (Windows system only).

FN + ?: Cycle through LOGO colors (10 options). Default is LOGO light and backlight (Red, Green, Blue, Yellow, Cyan, Purple, White, Orange, Pink, Light Blue).

FN + Knob: 1. Adjust computer volume. 2. Mute computer.

Short press FN + 4: Enter 2.4G mode. Long press for 4 seconds to enter 2.4G pairing mode, mode light displays green.

Connectivity Modes

Bluetooth Pairing: Long press FN + ESC for three seconds to enter BT2 pairing mode, mode light displays blue. Long press FN + 3 or FN + 4 to switch between Bluetooth channels.

2.4G Connection: Short press FN + 4 to enter 2.4G mode. Long press for 4 seconds to enter 2.4G pairing mode, mode light displays green.

Wired Connection: Connect the Type-C cable.

Lighting Effects

Brightness Adjustment: Use FN + Page Up/Down to adjust brightness.

Speed Adjustment: Use FN + Left/Right Arrow keys to adjust the speed of lighting effects.

LOGO Color Cycle: Press FN + ? to cycle through 10 different LOGO colors.

Charging and Power Management

Charging Mode: When charging, the mode light turns red. When fully charged, the mode light turns off. The keyboard will indicate when charging is needed if it is not currently charging.

Sleep Mode: The keyboard enters a deep sleep mode after 15 minutes of inactivity when not connected. When re-connecting or waking from sleep, the mode light will return to its original color.

Manufacturer Information

Manufacturer: Jiangxi Jichi Technology Co., Ltd

Address: Building 3, Gofrey Industrial Park, Lubao Avenue, Qingyuan District, Ji'an City, Jiangxi Province

Hotline: 400-1191-696

Product Execution Standard Number: Keyboard GB/T 14081-2010

Note: Product images are for reference only and may differ from the actual product. Please refer to the actual product.

FCC Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.