Electro-Voice ETX-12P 2-Way Powered Speaker
Product Overview
- 2000 W amplifier and 135 dB peak SPL
- Single-knob DSP includes presets for multiple configurations and top+sub combinations (performance style, locations, and space)
- Loudspeaker system performance monitoring via integrated LCD and front panel LED
- SST design assures precise and consistent coverage
- Designed for floor, stacked, or tilt pole mount (0 or 7.5 degrees) for portable or permanent installation
- (Eight (8) M10 threaded suspension points)
The ETX-12P from Electro-Voice is a high-power two-way compact loudspeaker; it can be used in a variety of portable and permanent applications. The DSP (Digital Signal Processing) menus offer extensive configurations, crossovers, selective voicing, protection limiters, EQ modes, and a lockout mode prevents casual changes to the system. Loudspeaker system performance is optimized via an LCD screen. The front LED indicates power or can be configured to indicate limit. EV-patented SST (Signal Synchronized Transducers) waveguide design provides uniform coverage and directivity. Waveguides are optimized using advanced simulation software and proprietary algorithms for precise control and lowest distortion. EV designed and manufactured transducers include SMX woofer technology using composite cone materials, flux stabilizing rings, and thermal management. This transducer yields lower distortion, smooth response, and high SPL. The high-efficiency DH3-B compression driver has a convex diaphragm driving a coherent phase device extending frequency response to 20 kHz. EV's FIR-Drive technology utilizes the latest FIR (Finite Impulse Response) filter technology to optimize transducer linearity and advanced limiter algorithms for independent peak and thermal transducer protection. The enclosure is constructed out of 18-mm plywood finished with EVCoat. ETX Powered Loudspeakers combine EV-engineered intelligent DSP, high-powered amplifiers, and high-efficiency transducers to deliver that legendary EV sound and performance.
A front-side view of the Electro-Voice ETX-12P powered speaker shows a prominent 12-inch woofer at the center, surrounded by a waveguide for the high-frequency driver. The cabinet is black and appears robust, designed for professional use. The Electro-Voice logo is visible on the grille.
System Overview
Notice
[Information] This Electro-Voice loudspeaker should be suspended overhead only in accordance with the procedures and limitations specified in the User's Manual. This system should be suspended with certified rigging hardware by an authorized rigging professional and in compliance with local, state, and federal overhead suspension ordinances.
Technical Specifications
| Specification | Value |
|---|---|
| Frequency response (-3 dB) | 55 Hz - 20 kHz |
| Frequency range (-10 dB) | 43 Hz - 20 kHz |
| Maximum SPL | 135 dB peak |
| Coverage (H x V) | 90° x 60° |
| Power rating | 2000 W |
| LF transducer | SMX2120 300 mm (12 in) |
| HF transducer | DH3-B 1.25-in titanium compression driver |
| Crossover frequency | 1600 Hz |
| Connectors | (2) XLR/TRS combo jack and (1) XLR link output |
| Enclosure | 18 mm plywood with EVCoat |
| Grille | 16AWG steel with powdercoat |
| Suspension | (8) M10 suspension points |
| Color | Black |
| Dimensions (H x W x D) | 613 mm x 381 mm x 400 mm (24 in x 15 in x 16 in) |
| Net weight | 23.6 kg (52.0 lb) |
| Shipping weight | 26.8 kg (59.1 lb) |
| Power consumption | 100 - 240 V~, 50 - 60 Hz, 1.6 - 0.8 A |
Notes:
Full space measurement using the music DSP preset.
Maximum SPL is measured at 1 m using broadband pink noise at maximum output.
Current rating is 1/8 power.
Frequency Response Graph
A line graph illustrates the frequency response of the ETX-12P speaker. The Y-axis represents Sensitivity in decibels (dB) from 70 to 110 dB, and the X-axis represents Frequency in Hertz (Hz) on a logarithmic scale from 50 Hz to 20,000 Hz. Three distinct curves are shown for 'Speech Mode', 'Live Mode', and 'Music Mode', indicating how the speaker's output varies across frequencies depending on the selected DSP preset.
Amplifier Panel Description
The rear amplifier panel of the ETX-12P speaker features the following controls and connectors:
- 1. LCD: Display for settings and monitoring.
- 2. MASTER VOL/DSP: Knob for controlling master volume and navigating DSP menus. Includes a "PUSH FOR DSP" function.
- 3. INPUT LEVEL: Control for adjusting the input signal level.
- 4. MIXED OUTPUT: An XLR connector providing a mixed output signal for daisy-chaining to other devices.
- 5. INPUT: An XLR/TRS combo jack for accepting audio input signals.
- 6. POWER: The main ON/OFF switch for the unit.
- 7. MAINS IN: The connector for the main power input.
Dimensions
Orthographic views of the Electro-Voice ETX-12P speaker are provided, showing Left, Front, Right, and Bottom perspectives. Key overall dimensions are:
- Height: 613 mm (24 in)
- Width: 381 mm (15 in)
- Depth: 400 mm (16 in)
Additional dimensions indicate the placement of suspension points and the overall profile. The bottom view shows a 40° tilt capability for pole mounting.
Ordering Information
Models
- ETX-12P-US_HE: 12" 2-way powered speaker, US cord, 120V. Order number: ETX-12P-US_HE | F.01U.302.281
- ETX-12P-EU: 12" 2-way powered speaker, EU cord, 240V. Order number: ETX-12P-EU | F.01U.396.737
Accessories
- ETX-BRKT12: Wall mount bracket for ETX-12P, black. Order number: ETX-BRKT12 | F.01U.300.023
- ETX-TCA-L: Truss adaptor for ETX-12P/15P/35P, black. Order number: ETX-TCA-L | F.01U.300.022
- ETX-12P-CVR: Padded cover for ETX-12P, EV logo. Order number: ETX-12P-CVR | F.01U.297.635
- EBK-M10-3PACK: Forged M10 3 pack eyebolt kit, set of 3. Order number: EBK-M10-3PACK | F.010.301.455
- BRKT-POLE-S: Wall mount bracket 8", 10" 2-way speaker (also for some 12-inch loudspeakers), black. Order number: BRKT-POLE-S | F.01U.385.536
- BRKT-POLE-L: Wall mount bracket 12", 15" 2-way speaker (for loudspeakers up to 15 inches), black. Order number: BRKT-POLE-L | F.01U.385.537
