Components List and Assembly Steps
Thank you for choosing JOYALENS products. Please read the assembly steps and user manual carefully before use. If you have any problems with the use and assembly, please feel free to contact JOYALENS. We will reply within 24 hours (there may be a delay on holidays). We appreciate the opportunity to serve you, your satisfaction is our utmost priority!
Components
Microscope Monitor
Base
Beam
Column
Screw x2
Spring x2
Metal clip x2
Assembly Steps
-
Step 1
Assemble the column to the base.
-
Step 2
Assemble the beam to the column (2.1). Tighten the screws (2.2).
-
Step 3
Unscrew the screws and remove the lens. Be careful not to drop the lens.
-
Step 4
Assemble the lens and tighten the screws (4.1, 4.2). Insert the protrusion into the slot.
-
Step 5
Metal clips assembly step. Assemble the clips to the base if necessary.
-
Step 6
When observing with lens D, slot in the DC power supply.