Mi Watch User Manual

Product Overview

Before use, please read and comply with the safety precautions in this user manual. Read this manual carefully before use, and retain it for future reference.

Key Components:

• Home Button: Primary button for navigation and power.
• Display Screen: Touch-sensitive screen for interaction.
• Sport Button: Button dedicated to starting or managing workouts.
• Microphone & Barometer: For audio input and atmospheric pressure sensing.
• Contact Point: For charging and data transfer.
• Heart Rate Sensor Area: Located on the back for monitoring heart rate.
• USB Connector: Part of the charging dock.
• Charging Dock: Used to charge the Mi Watch.

Note: Illustrations are for reference only. Actual product and functions may vary due to enhancements.

How to Wear

For daily use, comfortably tighten the band around your wrist about one-finger width away from your wrist bone. Ensure the heart rate sensor can collect data normally. Wearing the straps too loosely may impact data collection.

[Illustration showing correct watch placement on wrist for heart rate monitoring]

How to Connect

Download and install the Xiaomi Wear/Xiaomi Wear Lite app to manage your watch and access more services. Log in to your Mi account.

1. Press and hold the home button for three seconds to turn on the watch.
2. Scan the QR code on the watch display with your phone to download and install the Xiaomi Wear/Xiaomi Wear Lite app. Alternatively, download from app stores or scan the provided QR code.
3. Log into your Mi account in the app, select 'Add device', and follow the instructions.
4. Grant the pairing request on the watch. When an identical pairing code is displayed on both devices, tap 'Pair' on your phone to complete the pairing.

Notes:

• Ensure Bluetooth is enabled on your phone and the watch is connected during pairing.
• If the pairing code appears on the watch but not the phone, check phone notifications for a pairing request.
• If the watch cannot be found or connected, press and hold the home button for three seconds to restore factory settings and try again.

[QR Code for downloading the Xiaomi Wear App]

For Android Devices: Xiaomi Wear App

For iOS Devices: Xiaomi Wear Lite App

How to Use

Screen Instructions

1. View notifications: Swipe down from the top on the home screen.
2. Open control panel: Swipe up from the bottom on the home screen.
3. Switch widgets: Swipe left or right on the home screen.
4. Go back: Swipe from the left edge to the right on other pages.

[Diagram illustrating screen swipe gestures: down for notifications, up for control panel, left/right for widgets, left edge swipe for back]

Button Instructions

1. Turn on/off: Press and hold for three seconds.
2. Force restart: Press and hold for 15 seconds.
3. Enter function list: Press from the home screen.
4. Pause/resume workout: Press during a workout. Press and hold to exit workout.
5. Switch data page: Press during a workout.
6. Open shortcut (default: workout list): Press when not in a workout.

Note: Shortcuts can be customized via the Xiaomi Wear/Xiaomi Wear Lite app.

[Diagram illustrating button functions on the watch]

Disassembly

Adjust the buckle position according to your wrist circumference. To remove the strap, refer to the figures below. Ensure the strap is securely installed by pulling it after attaching.

[Illustration showing how to remove and install the watch strap]

Charging

1. Place the watch on the charging dock, ensuring contact points on the watch and dock align.
2. Connect the charging dock to a standard adapter with a 5V output voltage and 0.5A or higher output current.

Notes:

• If the watch is unable to turn on after a period of disuse, charge it for about 1 minute before the charging icon appears.
• Wipe the watch's contact points clean before charging to avoid issues from sweat or moisture.

[Illustration of the watch on its charging dock]

Specifications

• Name: Mi Watch
• Model: XMWTCL02
• Device Name: Bluetooth Device
• Display Screen: 1.39-inch AMOLED
• Resolution: 454 × 454
• Sensors: Heart rate sensor, accelerometer, gyroscope, geomagnetic sensor, barometric pressure sensor, ambient light sensor
• Wireless Connectivity: Bluetooth 5.0 BLE
• Battery Capacity: 420 mAh
• Satellite Positioning: GPS/GLONASS/BDS/GALILEO
• Compatibility: Android 5.0 & iOS 10 or above
• Rated Input: 5V --- 0.5 A (DC)
• Item Dimensions: 45.9 × 53.35 × 11.8 mm (excluding strap and protrusions)
• Bluetooth Frequency: 2402MHz-2480 MHz
• Bluetooth Maximum Output: ≤13 dBm
• GPS/GLONASS/BDS/GALILEO Frequency: 1559MHz-1610MHz

Safety Precautions

• Hold your wrist still when measuring heart rate.
• The watch has a 5 ATM water resistance rating, suitable for cold showers, swimming pools, and shore swimming, but not saunas or scuba diving. This rating may decrease over time.
• The screen does not support underwater operations. Wipe excess water with a soft cloth before use if the watch gets wet.
• Avoid wearing the watch too tightly for daily use. Keep the contact area dry and clean the strap regularly. Discontinue use and seek medical attention if skin irritation occurs.
• Use only qualified or certified power adapters and the included charging dock.
• Keep charging components in a dry environment. Do not touch with wet hands or expose to liquids.
• Operate the watch within a temperature range of -10°C to 45°C. Extreme temperatures may cause malfunction.
• The watch has a non-removable built-in battery. Do not disassemble or expose to extreme heat. Replace only with equivalent battery type.
• Do not disassemble, puncture, strike, crush, or incinerate the battery. Stop using if damaged or leaking.
• Never dispose of the watch or battery in fire.
• This watch is not a medical device. Data should not be used for medical diagnosis or treatment.
• Keep small parts away from children to prevent choking hazards.
• This watch is not a toy and requires adult supervision for children.

Regulatory Compliance Information

WEEE Information

This symbol indicates the product is waste electrical and electronic equipment (WEEE Directive 2012/19/EU). Dispose of it at designated collection points to protect health and the environment. Contact local authorities for more information.

EU Declaration of Conformity

Xiaomi Co., Ltd. declares that the radio equipment type XMWTCL02 complies with Directive 2014/53/EU. The full EU declaration of conformity is available at: http://www.mi.com/global/service/support/declaration.html

Safety Information

Caution

Battery abuse or mishandling can cause overheating, liquid leakage, or explosion. Follow these guidelines:

• Do not open, disassemble, or service the battery.
• Do not attempt to replace internal rechargeable lithium batteries.
• Do not crush or puncture the battery.
• Do not short-circuit the battery or expose it to water/liquids.
• Keep batteries away from children and fire.
• Avoid extreme temperatures and low air pressure environments for the battery.
• Stop using the battery if damaged or leaking.
• Dispose of batteries according to local laws and regulations; do not put in landfills.

Battery Safety

• Disposing of batteries in fire, hot ovens, or through mechanical crushing/cutting can cause explosions.
• Leaving a battery in high-temperature environments or subjecting it to extremely low air pressure can lead to explosions or leakage of flammable materials.
• The device has a built-in, non-removable battery. Do not disassemble or modify it.
• Dispose of batteries according to local laws and regulations; do not put in landfills.