Cecotec Cumbia Cafelizzia 790 Espresso Machine

Safety Instructions

Read these instructions thoroughly before using the appliance. Keep this manual for future reference. Follow all safety instructions closely.

Ensure mains voltage matches the appliance's rating label and the wall outlet is grounded. Place the appliance on a dry, stable, flat, heat-resistant surface. This product is designed for household use only.

Do not immerse the cord, plug, or any non-removable part in water or other liquids. Ensure hands are dry before handling the plug or switching on the appliance.

Do not use the appliance if its cord, plug, or housing is damaged, or if it malfunctions or has been dropped. Check the power cord regularly for visible damage. If damaged, it must be replaced by Cecotec's official Technical Support Service.

Do not cover the appliance during operation or place heavy objects on it. Do not use near gas or electric hobs, heated ovens, or open flames. Avoid use on soft surfaces (like carpets) or where it may tip over. Do not use outdoors or in areas with high humidity.

Do not use accessories not recommended or provided by Cecotec. Accessible surfaces may be hot during use and could cause burns; use gloves and do not touch hot surfaces immediately after use.

Do not operate the device without water. Do not move or turn the appliance off during operation. Ensure the cord does not hang over the edge of the working surface and avoid contact with hot surfaces.

Cleaning and maintenance tasks must not be carried out by children. The appliance is not intended for use by children under 8. Children aged 8 and above, or persons with reduced capabilities, can use it under continuous supervision and if they understand the hazards involved. Supervise children to ensure they do not play with the appliance.

Note: This product has undergone quality control. Although unlikely, there may be residual water drops.

Parts and Components

The appliance consists of the following parts:

• Tank cover
• Water tank
• Steam dial
• Control panel
• Cup tray
• Steam Tube
• Drip tray
• Filter for 1 coffee
• Filter for 2 coffees
• Filter holder
• Portafilter
• Measuring spoon and coffee tamper
• Steam button
• 2 espresso/double espresso button
• 1 espresso button
• Power button

Before Use

Remove all packaging materials and stickers. Check that all parts and components are included and in good condition. Contact Technical Support Service immediately if any damage is observed.

First Cleaning

Fill the water tank to the MAX mark. Insert the filter into the funnel and assemble the portafilter. Ensure the portafilter is aligned with the lock drawing for safe assembly.

Plug in the device and press the power button. The machine will beep, and the 1 espresso and 2 espresso light indicators will turn on, indicating heating. Once the indicators are steady, press the 1 espresso button to start the cleaning process. Ensure the steam extraction knob is off.

For a more thorough cleaning, use a 1:4 solution of vinegar and water or a descaling product, followed by a rinse with water.

Operation

Fill the water tank without exceeding the MAX mark. Connect the coffee machine to a power supply and ensure the steam knob is in the off position.

Espresso

While the machine preheats, place the desired coffee filter in the portafilter, fill it with coffee powder, and press it down using the measuring spoon/tamper. Clean excess coffee from the filter's edge.

Insert the portafilter and lock it tightly.

Once the 1 espresso and 2 espresso light indicators are steady, press the desired coffee button to brew 1 or 2 coffees. Place an appropriate cup or cups under the coffee spout.

Milk Froth

Press the power button, then the steam button. The steam light indicator will remain steady when preheating is complete.

Fill a container with milk (approximately 1/3 full). Use cold whole milk for optimal results.

Release some steam before frothing. Insert the steam tube about 1 cm into the milk and slowly turn the steam knob counterclockwise until steam is released.

When milk temperature rises and froth volume increases, turn the steam knob clockwise to the 0 position and press the steam button to stop the function.

Warning: Clean the steam exit with a wet sponge immediately after use. Remove the steam tube and clean its inside. Emitting steam again can help clean any remaining milk inside the tube.

Hot Water

Turn the steam knob to the water position to dispense hot water. Turn the knob back to 0 to deactivate.

Memory Function

Once the machine has preheated and indicators are steady, hold down the 1 espresso button. When the desired amount of coffee is brewed, release the button. The machine will emit a sound to confirm the quantity has been saved. The default brewing time is 60 seconds.

To save a larger espresso or 2 espressos, use the 2 coffee button instead.

Factory Settings

To restore factory settings, hold the 1 coffee button and the steam button for 3 seconds. A beep will confirm the reset.

Device Cooling Process

After steaming or brewing, the device temperature may increase significantly. The 1 and 2 coffees indicator lights will blink quickly, indicating the device needs to cool down.

To cool down: Rotate the steam knob to the water position for a few seconds. When indicator lights flash slowly, turn the steam knob to 0. When the power light indicators are steady, the device is ready for use.

Note: The coffee maker has an auto-off safety system that activates after 25 minutes of non-operation.

Cleaning and Maintenance

Disconnect the device from power and allow it to cool completely before cleaning.

Do not use abrasive cleaners or scouring pads. Use a soft, dampened cloth for the exterior. Do not immerse the main body in water or other liquids.

Wash the water tank, drip tray, and cup holder tray regularly. Clean the steam tube immediately after use with a cloth, being careful not to get burned. Allow steam to be released to avoid blockages.

If the steam tube is clogged, use a needle to unblock it. Remove and empty the portafilter, clean it with water and a cloth. Do not wash it in the dishwasher. Clean all parts with water and dry thoroughly.

Cleaning Mineral Deposits or Descaling

Mineral deposits can affect machine operation. Descale regularly. The frequency depends on water quality and usage.

Recommended descaling: Fill the water tank with water and descaling product (or vinegar) up to the MAX level in a 4:1 proportion (water:descaler). Repeat with water only to remove any residue.

Troubleshooting

Technical Specifications

Product: Cafelizzia 790 Steel/790 Shiny/790 White/790 Black

Product reference: 01582/01583/01650/01651

Voltage: 220-240V~50/60 Hz

Power: 1350 W

Made in: China | Designed in: Spain

Disposal of Old Electrical Appliances

Follow European directive 2012/19/EU (WEEE) for proper disposal of electrical appliances. Do not dispose of with unsorted municipal waste. Collect separately for recovery and recycling to reduce environmental impact.

The crossed-out wheeled bin symbol indicates your obligation for correct disposal. Remove and dispose of batteries appropriately if present.

Contact local authorities or retailers for information on correct disposal of old appliances and batteries.

Technical Support and Warranty

This product is under warranty for 2 years from the date of purchase, provided proof of purchase is submitted, the product is in perfect physical condition, and it has been used properly as explained in this manual.

The warranty does not cover:

• Product used for purposes other than intended, misused, exposed to moisture, immersed in liquid or corrosive substances, or other customer-attributable faults.
• Product disassembled, modified, or repaired by unauthorized personnel.
• Faults deriving from normal wear and tear of parts due to use.

The warranty covers manufacturing defects for 2 years, except for consumable parts. Misuse voids the warranty.

For any problems or doubts, contact Cecotec Technical Support Service at +34 963 210 728.