WIND F99

Product Features

• Stylish design with Gasket construction and a fine, soft and flexible feel.
• Keycaps and mechanical switches are pluggable.
• 4000mAh*2 large-capacity lithium battery can be recharged, with power switch, environmental protection and energy saving, saving worry and money, effectively extending battery life.

Specifications

• Connection: Type-C wired & 2.4G wireless & BT
• Number of keys: 99 keys
• Pluggable mechanical switch
• RGB switchable lighting effects
• Charging voltage/current: DC 5V/≤830mA
• Rated voltage: DC 3.7V
• Dimensions: 390.63 (L) ×146.78 (W) ×42.57 (H) ±0.5mm
• Weight: 1183g
• Operating system: WIN XP/7/8/10/Android/IOS/MAC
• Lithium battery: rechargeable lithium battery 4000mAh*2
• Battery life: 53 hours (default lighting effect), 400 hours (with backlight and side lights off)

Functions and Indicators

Description of shortcut keys: (Note: You may need to switch to the corresponding mode using FN+`~/1/2/3 in the upper left corner to activate long-press functions.)

RGB Lighting Effects:

• FN+\| key combination switches between 15 RGB light effects.
• With the drive, there are music rhythm RGB lighting effects with 5 modes.
• Cooperate with drive keys for custom functions and macro definitions.

Indicators:

• Caps Lock indicator
• RGB light/power indicator
• NUM indicator

Operating Instructions

2.4G Mode:

1. Toggle the switch in the upper left corner to 2.4G mode. The cyan light of the key blinks slowly.
2. Press FN+'~ key for 3 seconds to enter code pairing state.
3. Plug in the receiver to finish code pairing. The cyan light of the key stays on for 2 seconds upon successful connection. Factory default pairing is already done.

BT Mode:

1. Toggle the switch in the upper left corner to Bluetooth mode (BLE5.0/BLE3.0). Device names are AULA-F99 3.0 / AULA-F99 5.0. Can connect to 3 devices.
2. FN+1=BT 1: Blue indicator light under the key flashes fast, then flashes slowly when returning to connection. Blue light stays on for 2 seconds when connected.
3. FN+2=BT 2: Blue indicator light under the key flashes fast, then flashes slowly when returning to connection. Blue light stays on for 2 seconds when connected.
4. FN+3=BT 3: Blue indicator light under the key flashes fast, then flashes slowly when returning to connection. Blue light stays on for 2 seconds when connected.

Wired Mode: Toggle the switch in the upper left corner to the center position for wired mode. The white light on the "4" button lights up for 2 seconds.

Restore Default: FN+ESC long press for three seconds restores default settings. Saved BT device connections are not cleared.

Power Indicator: FN+B can show keyboard power level. Charging indicator shows streaming light. Full charge is a solid green light. 5 lights indicate battery level, with each green light representing 20% battery. Low battery is indicated by all red lights.

Charging Instructions

1. It is recommended to use only the computer USB port to charge the keyboard.
2. Please do not use fast-charging mobile phone chargers.
3. Please do not use inferior non-standard power adapters.
4. Please do not use over-voltage and over-current power adapters.
5. When charging, please keep away from high-temperature equipment.
6. The indicator light is on when charging and off when fully charged.
7. Please turn off the power switch when not in use for a long time.

Note: These charging instructions also apply to other devices with charging capabilities (keyboards/mice/headphones/speakers, etc.).

Manufacturer Information

Dongguan Suoai Electronics CO.,LTD
SOAI Industry Park, Huayu Street, Changlong Village, Huangjiang Town, Dongguan City, Guangdong Province.
Website: www.aulastar.com
Execution Standard: GB/T 14081-2010
Made in China

Manual Technical Requirements

1. Finished product size: 80x95mm

2. Material: 128g coated paper

3. Process: Accordion fold (double-sided printing)