Skullcandy USER GUIDE

Charge Case

To charge the earbuds, place them inside the charging case. Connect the case to a power source using the provided USB-C cable. The LED indicator on the case shows the charging status.

Auto Pair Mode

When the earbuds are removed from the charging case, they automatically power on and enter pairing mode. The LED indicators on the earbuds will flash blue.

Pairing Mode

If automatic pairing fails, manually enter pairing mode by pressing and holding the touch button on each earbud for 3 seconds until the LED indicator flashes blue.

Power - On

Earbuds automatically power on when removed from the charging case. LED indicators illuminate.

Power - Off

Place earbuds back into the charging case to power them off. LED indicators will illuminate and then turn off.

Play/Pause

Tap the touch button on either earbud once to play or pause audio.

Track Forward

Double-tap the touch button on the right earbud to skip to the next track.

Track Back

Double-tap the touch button on the left earbud to return to the previous track.

Volume Up

Triple-tap the touch button on the right earbud to increase the volume.

Volume Down

Triple-tap the touch button on the left earbud to decrease the volume.

Activate Voice Assistant

Press and hold the touch button on either earbud for 2 seconds to activate your device's voice assistant (e.g., Siri, Google Assistant).

Clear Paired Device

To clear the list of paired devices, press and hold the touch button on both earbuds simultaneously for 5 seconds until the LED indicators flash red.

Tile™ Enable

Download the Tile app to enable location tracking for your earbuds. The 'Find with Tile' feature helps locate misplaced earbuds.

EQ Modes

Press and hold the touch button on the left earbud for 2 seconds to cycle through different Equalizer (EQ) modes: Music, Podcast, or Movie. The LED indicator will flash to confirm the selected mode.

Pair Tile™

Follow the instructions within the Tile app to pair your Skullcandy earbuds with your Tile account for tracking.

Specifications

Regulatory and Compliance Information

This section contains important regulatory and compliance information, including FCC statements, CE markings, and other certifications. Please refer to the original documentation for full details.

FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CE Marking: Indicates compliance with relevant EU directives.

Other Symbols: Various symbols indicate compliance with recycling standards (e.g., WEEE), product safety, and regional certifications.

For detailed information on specific regulations and certifications applicable to your region, please consult the full documentation or the product packaging.